----- Original Message ----- From: "Dominic Hawken" <[email protected]> To: <[email protected]> Sent: Sunday, December 04, 2011 12:54 AM Subject: [amsat-bb] Remote polarity / preamp switching
I currently have two runs of coax from the shack up to the roof, each connected to smallish dual band 2/70 yagis, horizontally polarised, on an az/el rotator. One's connected to the 70cm output of my FT847, and the other to the 2m output. > > I'd like to upgrade to cross-polarised beams for 2 and 70 that I can switch between vertical, horizontal and circular polarisation, and also add masthead preamps powered through the coax. Some form of remote switching seems to be the way to go, but the few commercial switches I've found googling are really expensive (and I'd need two afaik). > I'm basically wanting to upgrade without having to run more coax or power cable up to the mast if possible - wondering of anyone has done something similar without breaking the bank. > > Thanks in advance tor any help, > > Dominic G6NQO. > Hi Dominic, G6NQO Your project is a difficult task on time and money. BTW in a separate email to you I have attached my articles "Switching Four Polarizations on a 70 cm crossed yagi" publisced into the AMSAT Journal March/April 2007 first part, and May/June 2007 the second part. 73" de i8CVS Domenico _______________________________________________ Sent via [email protected]. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
