Hi Carl,
Well, same results here. Success early in the week, but nothing since. I
wonder if our collective traffic has reset something up there?
However, on my last try (last night), I copied one beacon clearly - decoded and
forwarded to IS - but I also heard a few other weak packets by ear that were
not decoded. I could tell that they were not beacon packets (the long string
of G's is very distinctive), so either I was hearing somebody uplinking on the
downlink, or perhaps other satellite activity on 145.825.
There was also a portion of the pass where the FM noise would suddenly drop for
a second and then return a few times. I suspect that was 9600 baud traffic
from the satellite. I'm not set up to receive 9600 packet, but if that was the
case, perhaps we'll have more success digipeating at 9600. Of course, that
won't keep the transmitter as occupied - the packets are so much shorter - but
it would indicate that the satellite is still in active digipeat mode.
Greg KO6TH
Date: Sun, 11 Dec 2011 07:31:54 -0500
From: w8...@w8krf.net
To: amsat-bb@amsat.org
Subject: [amsat-bb] FAST1 Status?
Has there been a change to FAST1 since Thursday? During two passes on
Thursday, I was able to digipeat through it using AGWPE (set to 1k2),
UISS, and SatPC. I have included a portion of my log below. Both
yesterday (12/10) and this morning (12/11) I was not able to digi
through it although I was receiving the beacon.
----------------------------------------------------------------
[UISS Auto-Log date - Mode: Only Digipeated Packets - 12/8/2011]
----------------------------------------------------------------
{snip}
_______________________________________________
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
