--- On Fri, 7/9/12, [email protected] <[email protected]> wrote: > An essential feature would be that whenever a 'packet' of > data is received, that data is displayed rather than waiting > for the complete image to be received error free. > I couldn't find much on DRM encoding but I think it was > originally intended for digital voice in a narrow bandwidth > so it sounds suitable for low power satellite use.
WinDRM (and DRMDV/FDMDV) were written by Cesco Lanza HB9TLK some info at http://n1su.com/windrm/download.html To achieve a reasonable data rate it's usually run at 64QAM (with full SSB bandwidth). 64 QAM is less robust and requires a higher S/N. I've no idea what the practical effects of a high Doppler shift would be, although a computerized station with frequent Doppler correction should track it okay. Is the data rate on High Altitude Balloons about 300 bps ? I've never received any images from them but if 300 bps is correct then the images are either low res or take a long time to send ? Analog SSTV is still going strong some 6 years after the introduction of Digital SSTV perhaps indicating that existing Digital SSTV approaches do not yet match the performance/robustness/ease of use of analog for HF working. 73 Trevor M5AKA _______________________________________________ Sent via [email protected]. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
