What happens if you do try to change frequencies during transmit?  There is a 
race condition between the status check and frequency programming where the 
mike PTT button could be pressed.
Greg. KO6TH
-- 
Sent from my new toy...  Please ignore tupos.

Erich Eichmann <[email protected]> wrote:

>Hello,
>To adjust the TX frequency via CATcontrol a program first has to toggle
>the 
>VFOs (command hex. 81)  to get access to the TX VFO. After adjusting
>the TX 
>frequency it has to toggle the VFOs back, of course.
>
>Also, it is necessary to check the TX status (command hex. F7)  before 
>sending frequency commands. The frequencies must not be changed during
>TX. 
>The adjusment has to be suspended until the radio is in RX again.
>
>73s, Erich, DK1TB
>
>----- Original Message ----- 
>From: "Richard Ferryman" <[email protected]>
>To: <[email protected]>
>Sent: Tuesday, March 26, 2013 2:00 AM
>Subject: [amsat-bb] gpredict and ft-817 cat control
>
>
>> Does anyone know a way around the problem that gpredict can only
>control 
>> the FT-817 downlink frequency.  I suspect there is a limitation in
>the 
>> hamlib control for this rig.  The gpredict manual says 'the TX
>frequency 
>> can not be adjusted via the CAT interface (e.g. Yaesu FT-817)' but
>SatPC32 
>> on windows manages to handle TX and RX so it must be possible.
>> Dick G4BBH
>> _______________________________________________
>> Sent via [email protected]. Opinions expressed are those of the
>author.
>> Not an AMSAT-NA member? Join now to support the amateur satellite
>program!
>> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
>> 
>
>
>_______________________________________________
>Sent via [email protected]. Opinions expressed are those of the
>author.
>Not an AMSAT-NA member? Join now to support the amateur satellite
>program!
>Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
_______________________________________________
Sent via [email protected]. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

Reply via email to