Dick, For testing, you can place the provisional Keps in whatever list of Keps you wish. I pasted them at the bottom of the tle-new.txt file. Just be aware that if you update this file automatically, you will lose them. Then add the satellite to the group of your choice as usual.
FUNCUBE-1 1 99991U 13999A 13325.30956308 -.00000106 00000-0 00000 0 1 18 2 99991 97.7956 38.2570 0059925 198.5190 336.5388 14.77841394 15 Here are some DOPPLER.SQF values: FUNCUBE-1,145934.0,,USB,,,, TLM FUNCUBE-1,145960.0,435140.0,USB,LSB,REV,,, Transponder You won't need to change the AMSATNAMES.TXT. After launch, the way it is listed may change and require adding it in. 73s, Alan WA4SCA <-----Original Message----- <From: [email protected] <[mailto:[email protected]] On Behalf Of Richard Ferryman <Sent: Friday, November 15, 2013 5:40 AM <To: [email protected] <Subject: [amsat-bb] Funcube 1 and SatPC32 setup < <Can someone remind me of what I need to do to get Funcube 1 on <to SatPC32. <Obviously there is no keps for this bird on the normal <downloads yet. I <have the temporary 2-line keps from Amsat UK and frequencies. <Doppler.SQF <should be easy but where do I put the keps? V12.8c has a <separate list for <cubesats so will this affect where I put the keps? Will I <need to add/alter <AmsatNames.txt? I just want to test the system ready for next week. < <Dick G4BBH < < < <_______________________________________________ <Sent via [email protected]. Opinions expressed are those of <the author. <Not an AMSAT-NA member? Join now to support the amateur <satellite program! <Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb < _______________________________________________ Sent via [email protected]. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
