Duh! Brain fade Steve. That pass is 2:36 UTC. Also the first things I mentioned I watch are on the left bottom for the screen.
Rick On Fri, Nov 22, 2013 at 5:08 PM, Rick Walter <[email protected]> wrote: > Steve, I don't know if I can help. I am using a Kenwood TS 2000 X with an > interface to go between the audio output in the back of the rig to the > input of my HP laptop. I just have an M squared eggbeater without any > pre-amp for receive. > > My tracking software is SatPC32 to correct for the doppler effect. I only > touched up the downlink a couple of times on each of the two passes I > recorded and uplinked to the warehouse (147 frames). > > I Load SatPC32, have it running, Load the dashboard software and choose > to capture from the soundcard. The audio output of the RASCAL interface > goes into the input to my sound card. I have the volume up at about 75%. > Before the bird comes over the horizon, I see a wave on the Dashboard > software that is the result of the noise coming from the receiver. I can > actually hear the bird about 20-40 seconds before it comes over the horizon > (very faint but hear the distinct tone). The real time screen starts > filling with data as I see on the right bottom counting of the type of data > received, the serial number, and to the right, the packets decoded and > missed, plus the number of packets already sent to the warehouse and the > number waiting to be sent. > > Don't know if that helps at all. > > Having taught Earth Science and Astronomy for 36 years, now retired, I not > only like the linear transponders, but love to collect telemetry from the > birds too. It is not available yet, but I can't wait until they allow us to > download the whole earth orbit data from the warehouse. I want to watch the > data change as the bird goes around the earth. I used to do that with UO-11 > telemetry and use the data for labs using Excel's graphing functions in my > Astronomy classes with my students. > > Did you try decoding the sample wave files they provide? They allow you to > experiment getting the audio to your soundcard, then to the dashboard > software. > > I'm looking forward to the 03:41 Z pass for me later tonight. > > Rick, WB3CSY in FN10 > > > On Fri, Nov 22, 2013 at 3:43 PM, Steve Daniels < > [email protected]> wrote: > >> I don't know what I am doing wrong but so far I have failed to hear >> FUNCUBE >> let alone decode. >> I seem to have the correct keps as I see station near me uploading. >> Am using a radio not a dongle 145.935MHz USB mode is what I am using as >> settings. Is that correct or have I made a mistake >> >> Steve Daniels >> Amateur Radio Callsign G6UIM >> APRSISCE/32 Beta tester and WIKI editor http://aprsisce.wikidot.com >> >> _______________________________________________ >> Sent via [email protected]. Opinions expressed are those of the author. >> Not an AMSAT-NA member? Join now to support the amateur satellite program! >> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb >> > > > > -- > Sent from Rick's gmail account > -- Sent from Rick's gmail account _______________________________________________ Sent via [email protected]. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
