Gabriel, Look at the Mode tab at the top of the program.
73s, Alan WA4SCA <-----Original Message----- <From: [email protected] <[mailto:[email protected]] On Behalf Of Gabriel - EA6VQ <Sent: Sunday, December 22, 2013 4:24 AM <To: [email protected] <Subject: [amsat-bb] Doppler correction with CAT and SATPC32 < <I'm playing around with SATPC32 and its CAT interface to <automatically tune <the transmitter to the correct frequency depending on <receiver's frequency. < < < <After some initial trouble it's working reliably, but I don't <see any way to <fix the RX frequency so that it only changes the TX QRG. When <I enable CAT <it changes both QRGs RX and TX. < < < <It's cumbersome when making a QSO with a station which fixes <his downlink <frequency and SATPC32 is constantly retuning the receiver. < < < <Is there a way to configure SATPC32 so that it only changes TX QRG to <compensate Doppler according to a fixed RX frequency? < < < <73. Gabriel - EA6VQ < < <_________________________________________________________ < < < <_______________________________________________ <Sent via [email protected]. Opinions expressed are those of <the author. <Not an AMSAT-NA member? Join now to support the amateur <satellite program! <Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb < _______________________________________________ Sent via [email protected]. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
