Hi,
> Date: Sun, 16 Mar 2014 12:27:28 -0500 > From: "jerry keeton" <[email protected]> > Just before ZACUBE-01 reaches its' apex , I hear a signal that sounds like > pactor . That is on 14.099 . Never seem to find the correct software for > decoding . Just wondering if that is zacube since I hear it on every pass ? > > Date: Sun, 16 Mar 2014 18:42:51 +0100 > From: PE0SAT | Amateur Radio <[email protected]> > I could be wrong, but as far as I know is the 20m experiment not yet > started > and is the 20m antenna not yet deployed. > > Date: Sun, 16 Mar 2014 19:53:54 +0200 > From: "Hans" <[email protected]> > I have the same info. I will check tomorrow what the status is > Hans ZS6AKV > As Hans and Jan said we have not yet switched on the beacon transmitter or deployed the antenna. The initial beacon transmitted will be a short morse encoded text message, at eight or ten words per minute if I recall correctly. There is also a pseudorandom number message but that will likely only be used later on. We will definitely publicise it when we do start transmitting. In the mean time you can find more info at http://www.cput.ac.za/fsati and also on http://twitter.com/fsatispace . -- Regards, Leon Steenkamp (ZS1HD) French South African Institute of Technology Cape Peninsula University of Technology Cape Town, South Africa. [email protected] http://www.cput.ac.za/fsati _______________________________________________ Sent via [email protected]. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
