George,
Assuming that you already loaded the Icom drivers on the PC and
the 2 comm ports show up in your hardware list then setting up SatPC32
should be a breeze, "setup-radio-radio1 "icom" model IC-9100, baud rate
19200, addresses $7C $7C com-port # "
the baud rate and addresses are the default for the 9100, if yours are
different then of course adjust the values to match your 9100.
I'm guessing you have missed a step somewhere...
73
Kevin wa6fwf
On 4/18/2014 7:02 AM, george hinkle wrote:
I have an Icom 9100 been using if for a good time now. I'm using SatPC32 which
works very well with their driver .....if you can get it to work. I did it two
years ago but now I have two new computers and can't get it to work now.
Any one to help out there?
george wi9i
_______________________________________________
Sent via [email protected]. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
_______________________________________________
Sent via [email protected]. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
