Tom, Radio Shack 20-546 works fine and I find in stock in the stores. Look in the scanner area. Comes with right drivers on CD
The older 20-047 models are fine too. Be sure to use the stereo to mono adapter that comes with it and plug the mono plug into the CI-5 connector of the radio. Ive used this on many radios of these models: IC-910H IC-9100 IC-703 IC-7600 Your mileage may vary... (With a F stereo 1/8" to M 8pin mini din wired properly this USB adapter works for FT-817 also...) Thanks, Mike W4UOO Sent from my iPhone > On Jul 30, 2014, at 8:09 AM, Tom Warren <[email protected]> wrote: > > > Hello to the group…….. > > Does anyone have the specifics on how to setup two IC706 MKII-G’s for > satellite ssb/cw operation (duplex). > > I’ve done a bit of browsing and read the manual but remain confused on the > hardware needed when using > my Compaq laptop (no serial port), only USB’s. > > > Any advise would be appreciated. > > 73 > Tom > W4TMW > > > > _______________________________________________ > Sent via [email protected]. Opinions expressed are those of the author. > Not an AMSAT-NA member? Join now to support the amateur satellite program! > Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb _______________________________________________ Sent via [email protected]. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
