Did you install the binary or source rpm? binary rpm doesnt have .h files. you could also skip the whole rpm system and just get the .tar.gz and install / compile that provided you have a working compiler. If you remember what you installed (didn't say in original note) you need to verify if you ran the binary rpm cause my test on that just now indicates you don't get .h files included. i did this rpm -vv -i --test analog-4.13-1.i386.rpm .. the file list included no .h files, and if .h is required as the documents suggest then you're starvin, marvin. rpm -i --test is lame, it says it installed everything same as always, then at the end goes 'oh, just kidding.' i hate rpm :) but back to your set up - if you have a compiler and want to mess with the .h install the source rpm next time. or just run it with the config files only and don't compile in anything. i compiled once with source but after that was able to use multiple .cfg 's and run with those, on a virtual host box i have for linux. so you probably can do the same with the binary rpm but i am not uninstalling my non rpm source to try that out for you :) -=Dave Dennis -=Seattle, WA On Thu, 28 Dec 2000, gauri wrote: > Date: Thu, 28 Dec 2000 09:54:36 +0530 > From: gauri <[EMAIL PROTECTED]> > Reply-To: [EMAIL PROTECTED] > To: [EMAIL PROTECTED] > Subject: RE: [analog-help] trouble configuring analog Weblog analyezer ! > > thanks. > I am very smart but it seems u havn't read my mail carefully . I DONT GET > THE "anglhead.h" FILE AT ALL! And if i dont have the file from where am i > going to make changes to it ?? > > > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED]]On Behalf Of David Dennis > Sent: Wednesday, December 27, 2000 6:47 PM > To: [EMAIL PROTECTED] > Subject: Re: [analog-help] trouble configuring analog Weblog analyezer ! > > > you make changes to anlghead.h and keep the original if you're smart :> > > then run analog. > > you can ignore the anlghea2,3 and 4 if you want it'll run fine without > messing around with them. they're either further examples or further > customizations , not sure, but analog will run fine without worrying about > it. > > > -Dave Dennis > -analog user > > > On Wed, 27 Dec 2000, gauri wrote: > > > Date: Wed, 27 Dec 2000 18:24:51 +0530 > > From: gauri <[EMAIL PROTECTED]> > > Reply-To: [EMAIL PROTECTED] > > To: [EMAIL PROTECTED] > > Subject: [analog-help] trouble configuring analog Weblog analyezer ! > > > > 27th Dec 2000. > > > > I have installed analog 4.13 , using the following RPM > > "analog-4.13-1.i386.rpm" on Red Hat linux 6.1. I would like to mention > here > > that there was no previous older version of analog installed on my Linux > 6.1 > > machine before. > > > > All the documents that talk about configuring the "analog" mention about > > the file > > " anlghead.h " , " anlghea2.h " and " analog.cfg " . > > > > To my surprize , i do have " analog.cfg " file , but the other two files > > namely "anlghead.h" and " anlghea2.h " are missing . Are these two files > , > > to be written manually, all together by me ?? or has something gone wrong > > with my installation? please HELP!! > > > > > > NOTE: I have read the "relevant pages of the Readme" , particularly the > > sections on Starting to use analog and Customising and FAQ , Couldnt get > the > > answers so now counting on u :-) > > > > Regards > > Gauri > > > > ------------------------------------------------------------------------ > > This is the analog-help mailing list. To unsubscribe from this > > mailing list, send mail to [EMAIL PROTECTED] > > with "unsubscribe" in the main BODY OF THE MESSAGE. > > List archived at http://www.mail-archive.com/[email protected]/ > > ------------------------------------------------------------------------ > > > > ------------------------------------------------------------------------ > This is the analog-help mailing list. To unsubscribe from this > mailing list, send mail to [EMAIL PROTECTED] > with "unsubscribe" in the main BODY OF THE MESSAGE. > List archived at http://www.mail-archive.com/[email protected]/ > ------------------------------------------------------------------------ > > ------------------------------------------------------------------------ > This is the analog-help mailing list. To unsubscribe from this > mailing list, send mail to [EMAIL PROTECTED] > with "unsubscribe" in the main BODY OF THE MESSAGE. > List archived at http://www.mail-archive.com/[email protected]/ > ------------------------------------------------------------------------ > ------------------------------------------------------------------------ This is the analog-help mailing list. To unsubscribe from this mailing list, send mail to [EMAIL PROTECTED] with "unsubscribe" in the main BODY OF THE MESSAGE. List archived at http://www.mail-archive.com/[email protected]/ ------------------------------------------------------------------------
