Hi guys, I need your help. When I run analog for my virtual domains, I have no problems, but when I try to run analog on my global logs I keep getting the following error: *** malloc[3096]: error: Can't allocate region mach_port_type() failed (ipc/rcv) msg too large task_get_bootstrap_port() failed (ipc/mig) wrong reply message ID It should not give me a memory error because the logs are few and small (21 logs, largest around 6000 lines), and "top" shows me (while analog is running) that I have plenty of memory (the server has 640MB of RAM): PhysMem: 65.8M wired, 20.6M active, 129M inactive, 215M used, 425M free VM: 1.03G + 42.9M 23402(0) pageins, 52(0) pageouts I have also set in my config file: FILELOWMEM 2 HOSTLOWMEM 2 BROWLOWMEM 3 REFLOWMEM 3 USERLOWMEM 3 VHOSTLOWMEM 2 by the way, DNS is set to WRITE. So why am I getting these memory errors? I am running analog 5.03 under Mac OS X 10.0.4, and on my other Mac OS 9 servers I am processing logs that are 100 times larger without problems! Thanks in advance for your help, Charles +------------------------------------------------------------------------ | This is the analog-help mailing list. To unsubscribe from this | mailing list, go to | http://lists.isite.net/listgate/analog-help/unsubscribe.html | | List archives are available at | http://www.mail-archive.com/[email protected]/ | http://lists.isite.net/listgate/analog-help/archives/ | http://www.tallylist.com/archives/index.cfm/mlist.7 +------------------------------------------------------------------------
