I'm running Vicomsoft Internet Gateway (VIG) router software on my
Mac server, which provides shared Internet access to a small network
of mixed Mac and PC clients. This produces a log file that is
supposed to be in W3C Extended format. However, whenever I try to
analyse this log file with Analog 5.1d (Mac version) I get a stream
of error messages and no significant output in the Report.html file.
In analog.cfg, I have the following log format settings:
DEFAULTLOGFORMAT AUTO
LOGFORMAT AUTO
My VIG log file starts as follows:
#Software: "Vicomsoft Log Generator"
#Version: 1.0
#Date: 2002-02-07 03:00:02
#Start-Date: 2002-02-06 03:00:01
#End-Date: 2002-02-07 03:00:00
#Fields: date time c-ip c-dns s-ip s-dns
cs-method time-taken x-bytes-sent
x-bytes-received x-src-port-id x-dest-port-id
#Remark: Gateway Traffic Log ( W3C Extended Log Format )
(note: the #Fields: line is a single line but has wrapped in this e-mail)
and typical log entries are as follows:
2002-02-06 18:18:24 192.168.181.1:49178 -
194.72.108.245:80 banners.yellowpages.co.uk TCP
1.000 722 490 2 1
2002-02-06 18:18:25 192.168.181.1:49180 -
212.35.224.14:80 www.private-eye.co.uk TCP
13.000 1241 2650 2 1
2002-02-06 18:18:24 192.168.181.1:49177 -
212.35.224.14:80 www.private-eye.co.uk TCP
14.000 2344 7880 2 1
2002-02-06 18:19:24 192.168.181.1:49182 -
194.72.108.35:80 search.yell.com TCP 0.000 854
47907 2 1
(note: the log entries have wrapped in this e-mail, they all start
with 2002-02-06 and are on a single line in the actual log file)
The error trace I'm getting is:
analog: Warning C: Unknown configuration command: ignoring it:
2002-02-06 18:21:50 192.168.181.150:49295
analog: Warning C: Unknown configuration command: ignoring it:
2002-02-06 18:22:41 192.168.181.150:49296
<snip>
analog: Warning C: Unknown configuration command: ignoring it:
2002-02-07 01:15:31 192.168.181.1:49443
analog: Warning F: Failed to open logfile WebSTAR.log: ignoring it
analog: Warning R: Turning off empty time reports
analog: Warning R: Turning off empty Request Report
analog: Warning R: Turning off empty File Type Report
analog: Warning R: Turning off empty Directory Report
analog: Warning R: Turning off empty Domain Report
analog: Warning R: Turning off empty Organisation Report
analog: Warning R: Turning off empty Search Word Report
analog: Warning R: Turning off empty Operating System Report
analog: Warning R: Turning off empty File Size Report
analog: Warning R: Turning off empty Status Code Report
Complete!
with "analog: Warning C: Unknown configuration command" against EVERY
log entry!
I've even tried changing the LOGFORMAT to EXTENDED, but still get
error messages for every log entry line.
Has anyone got any experience of trying to analyse this type of log
file or does anyone have any suggestions/ideas?
Thanks for any help.
Best regards
Peter
--
Peter Reid
Reid-IT Limited, Loughborough, Leics., UK
Tel: +44 (0)1509 268843 Fax: +44 (0)870 052 7576
E-mail: [EMAIL PROTECTED]
Web: http://www.reidit.co.uk
+------------------------------------------------------------------------
| This is the analog-help mailing list. To unsubscribe from this
| mailing list, go to
| http://lists.isite.net/listgate/analog-help/unsubscribe.html
|
| List archives are available at
| http://www.mail-archive.com/[email protected]/
| http://lists.isite.net/listgate/analog-help/archives/
| http://www.tallylist.com/archives/index.cfm/mlist.7
+------------------------------------------------------------------------
