Jeremy,
Thanks for replying to my post. I've added the quotes with no change in results. I used the same anlgform.cfg file with a similar link on my Win2k server without quotes and it worked fine. I've confirmed that analog.exe is working correctly and it's generating reports using my log files without issue. Also, I've confirmed the path and it's correct. I've even moved the Analog 6.0 folder to another location on the server and tried it there with the same error. Next, I've set access rights to be full control on the analog.exe and anlgform.exe. I realize this is not the optimal config security wise but I'm desperate to get this going and have tried everything to try to figure out the issue. I've confirmed that the rights on the cgi-bin folder allow execution and read/write priveliges by the iusr account. I've also set the anlgform.cfg file to reference the same analog.cfg file that worked when I ran analog.exe from the cmd line. Again, no luck.
I know it's some stupid windows setting and really appreciate your help.
>From: Jeremy Wadsack <[EMAIL PROTECTED]>
>Reply-To: Support for analog web log analyzer <
[email protected]>
>To: Support for analog web log analyzer <
[email protected]>
>Subject: Re: [analog-help] "Program Incorrectly Configured" error on Win 2003server
>Date: Tue, 01 Mar 2005 17:11:16 -0800
>MIME-Version: 1.0
>Received: from lists.meer.net ([209.157.153.17]) by mc9-f23.hotmail.com with Microsoft SMTPSVC(6.0.3790.211); Tue, 1 Mar 2005 17:15:34 -0800
>Received: from lists.meer.net (localhost [IPv6:::1])by lists.meer.net (8.12.11/8.12.11) with ESMTP id j221BPYg070469;Tue, 1 Mar 2005 17:12:08 -0800 (PST)(envelope-from [EMAIL PROTECTED])
>Received: from imogene.sevensimplemachines.com ([67.40.207.238])by lists.meer.net (8.12.11/8.12.11) with ESMTP id j221BNQK070464for <
[email protected]>; Tue, 1 Mar 2005 17:11:24 -0800 (PST)(envelope-from [EMAIL PROTECTED])
>Received: from [10.0.1.31] (helo=[127.0.0.1])by imogene.sevensimplemachines.com with esmtpa (Exim 4.44 #1 (Debian))id 1D6IJz-0001xV-Bffor <
[email protected]>; Tue, 01 Mar 2005 17:06:39 -0800
>X-Message-Info: 0jbW5ANosZLM7OtErewEuG5ZqSyTZiqw/3PjOy70IrU=
>User-Agent: Mozilla Thunderbird 1.0 (Windows/20041206)
>X-Accept-Language: en-us, en
>References: <[EMAIL PROTECTED]>
>X-BeenThere:
[email protected]
>X-Mailman-Version: 2.1.5
>Precedence: list
>List-Id: Support for analog web log analyzer <analog-help.lists.meer.net>
>List-Unsubscribe: <http://lists.meer.net/mailman/listinfo/analog-help>,<mailto:[EMAIL PROTECTED]>
>List-Archive: <http://lists.meer.net/pipermail/analog-help>
>List-Post: <mailto:
[email protected]>
>List-Help: <mailto:[EMAIL PROTECTED]>
>List-Subscribe: <http://lists.meer.net/mailman/listinfo/analog-help>,<mailto:[EMAIL PROTECTED]>
>Errors-To: [EMAIL PROTECTED]
>Return-Path: [EMAIL PROTECTED]
>X-OriginalArrivalTime: 02 Mar 2005 01:15:34.0694 (UTC) FILETIME=[55CEE460:01C51EC5]
>
>
>>Can't run analog because the variable $analog was not set: read the
>>setup instructions!
>
>> ANALOG C:\Program Files\analog 6.0\analog.exe
>
>You probably need quotes around that path.
>
>
>Also, make sure the path is correct and that analog work without the
>web interface first. Finally check that the analog.exe is allowed to
>be run by the user the web server is running under (Network Services
>on W2k3)
>
>--
>Jeremy Wadsack
>Seven Simple Machines
>
>
>
>
>Matt at iprosper.net wrote:
>
>>
>>I'm attempting to configure Analog 6.0 on a Windows 2003 server by
>>using the web form to create the reports. I've successfully done
>>this on a Windows 2000 server but am receiving errors on the 2003
>>server. I've confirmed that analog.exe and anlgform.exe are running
>>from the cmd line. When I attempt to run the most basic form I
>>receive the following:
>>
>>Program Incorrectly Configured
>>
>>Can't run analog because anlgform.pl not set up properly.
>>See the server's error log for more details. [Tue Mar 1 18:40:11
>>2005] F:\SITES\iprosper.net\cgi-bin\stats\anlgform.exe: Can't run
>>analog because the variable $analog was not set: read the setup
>>instructions! Died at anlgform.pl line 123.
>>
>>I'm using the anlgform.exe for windows. I've confirmed that the
>>anlgform.cfg has the following data:
>>
>>#
>># Configuration file for Anlgform.exe Windows compiled form
>>interface.
>>#
>># Three command are available in this file.
>># ANALOG tells the location of the analog executable
>># FORBIDDEN a space separated list of commands (in upper case)
>># that cannot be used on the web.
>># CONFIGFILE Points to an Analog configuration file whose
>># contents will be read by Analog
>>#
>># Lines beginning with '#' are ignored as comments
>>#
>>
>># Put in here the location of your analog.exe
>># ANALOG C:\Downloads\analog\analog 532w32\analog 5.32\analog.exe
>>
>> ANALOG C:\Program Files\analog 6.0\analog.exe
>>
>># The following forbidden commands should always be listed for
>>security.
>># You may also want to add LOGFILE and DOMAINSFILE. See
>>docs/form.html
>># for a complete discussion of security issues.
>>FORBIDDEN LOGFORMAT APACHELOGFORMAT DEFAULTLOGFORMAT
>>APACHEDEFAULTLOGFORMAT HEADERFILE FOOTERFILE UNCOMPRESS OUTFILE
>>CACHEOUTFILE LOCALCHARTDIR ERRFILE DNS CGI SETTINGS PROGRESSFREQ
>>LANGFILE DESCFILE
>>
>>
>># If you want to include an analog config file as the default, you
>># can specify it here.
>># CONFIGFILE C:\downloads\analog\analog 532w32\analog
>>5.32\analog.cfg
>>
>>I'm going to set all config details via the form, thus the
>>commenting out of the CONFIGFILE line. Also, I've attempted to run
>>with versions 6.0 and 5.32 and receive the same error. Also, my
>>servers event viewer has no info pertaining to this at all. I've
>>checked all the online instructions, FAQ's, and searched the email
>>archives and have not found any solutions.
>>
>>I appreciate any help.
>>
>>Matt
>>
>>------------------------------------------------------------------------
>>
>>+------------------------------------------------------------------------
>>| TO UNSUBSCRIBE from this list:
>>| http://lists.meer.net/mailman/listinfo/analog-help
>>|
>>| Usenet version:
>>news://news.gmane.org/gmane.comp.web.analog.general
>>| List archives:
>>http://www.analog.cx/docs/mailing.html#listarchives
>>+------------------------------------------------------------------------
>>
>>
>
>
>+------------------------------------------------------------------------
>| TO UNSUBSCRIBE from this list:
>| http://lists.meer.net/mailman/listinfo/analog-help
>|
>| Usenet version:
>news://news.gmane.org/gmane.comp.web.analog.general
>| List archives:
>http://www.analog.cx/docs/mailing.html#listarchives
>+------------------------------------------------------------------------
