I built the kernel using this guide https://source.android.com/setup/build/building-kernels
with the build/build.sh command Do you have a tutorial for using the make bootimage command? Or should I just run the make bootimage command instead of the shell? And flash it in the same way Thanks! fredag 29. mars 2019 15.45.37 UTC+1 skrev Alessio Balsini følgende: > > Hi, > > > The phone reboots. But then I am not able to use the touch screen at > all. I cant unlock the phones sim card. If I hold down the power button for > a while and reboot it. The touch screen works. Not sure what causes that, > but maybe the kernel has been removed and switched out with the old one? > > How did you build the kernel? > I suspect your device is missing the touch screen drivers (maybe the > drivers you have in your device are not compatible with your kernel). > > `fastboot boot` just loads your boot image into ram, it does not flash > the boot partition. That's why the device switches back to the old > kernel after reboot. > > > Another similar question is. If Id like to put the Image.lz4-dtb file > inside the AOSP ROM. Where should I put it, and is that possible? If that > would make me able to flash both kernel and ROM at the same time? > > You should update the files in device/google/crosshatch-kernel and > then run `make bootimage`. > > Cheers, > Alessio > -- -- You received this message because you are subscribed to the "Android Building" mailing list. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/android-building?hl=en --- You received this message because you are subscribed to the Google Groups "Android Building" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
