Thanks a lot Brad!
I think it's working now. Though I don't know why my map center
retrieves a change map, since before I do all this code I setCenter at
some specific coordinates, my ''getMapCenter'' is not the same value.
I also set up like in your code the calculation in the server side
which makes more sense. I wonder how ur sending back the information
to Android. I'm trying a JSONObject but all this parsing is
overwhelming.
Anyway, thanks a lot, I'll try to fix this so I ca test the code and
the algorithm. By now it seems fine other than that ''center'' issue.
Again, thanks a lot :D
On Jun 27, 2010, at 2:37 AM, Brad Gies wrote:
I hope it's generic for all zoom levels.. it should be :).
How it works is that Google Maps at a zoom level of 1 displays the
entire world in 256 pixels... When you go to zoom level 2 you get
half the world in 256 pixels, zoom level 3 is 1/4 the world in 256
pixels... which is the same as 1 divided by 2 (to the power of
zoom level - 1), so the Math.pow(2, zoomLevel - 1) just gets the
number that corresponds to what you need to adjust by for the zoom
level.
All these functions could be (and will be) combined into about 3
lines for production.. but I just needed to step through it one step
at a time to test it out.
The double entireWorld = zoomToPower * 256; just calculates how
many pixels it would take to show the entire world (height or width)
and then I just brought it down to 1 degree so I could check the
calculations against a map and see what I was doing :).
double OneDegree = entireWorld / 360;
This calculates how much of a degree your screen will show for both
the height and width of your screen. I subtracted 40 pixels from the
height because that's roughly what my activity uses... and I didn't
care if I was exact.. I only want very close. I use it to call a web
service and I pass the Map Center latitude and longitude to the web
service along with the screen size (in degrees),
double heightSpan = (display.getHeight() - 40) / OneDegree;
double widthSpan = display.getWidth() / OneDegree;
and this is how I used it. Because my function returns the fraction
of a degree that will show on the screen, I adjust the
getLatitudeSpan() function to pass the same value by dividing it by
1E6. Again that should be combined for production.
LatLonSpans latLonSpans = getSpans();
if (mapView.getLatitudeSpan() == 0)
{
nvps.add(new BasicNameValuePair("latitudespan",
String.valueOf(latLonSpans.LatSpan)));
}
else
{
double latSpan = mapView.getLatitudeSpan() / 1E6;
nvps.add(new BasicNameValuePair("latitudespan",
String.valueOf(latSpan)));
}
also do the Longitude....
and latLonSpans = null;
My function returns the percentage of a degree that your entire
screen will show, so I pass the map center lat and lon to the server
with the latLonSpan values and then on the server end, I use almost
the same calculation you do:
int topLatitude = mapCenter (latitude) + (latSpanPassed /2);
int bottomLatitude = mapCenter (latitude) - (latSpanPassed/2);
int leftLongitude = mapCenter (longitude) - (lonSpanPassed /2);
int rightLongitude = mapCenter (longitude) + (lonSpanPassed /2);
On 26/06/2010 8:47 AM, Pedro Teixeira wrote:
Hi Brad,
Thanks for your solution. I'm trying to understand how it works.
Is this generic for all zoom levels?
I don't know how to implement the if condition snippet of your
code. Something is missing me or I'm not understanding it right.
Can you explain this value:
latSpan/1E6, is this the simple getLatitudeSpan?
I'm sorry, I'm a little bit overwhelmed with this problem for some
days and I've been really confused.
On Jun 26, 2010, at 3:53 AM, Brad Gies wrote:
Pedro,
I've been working on roughly the same thing today... see the
thread MapView.getLatitudeSpan..
All you're running into is that the map isn't ready when you are
asking for the getLatitudeSpan, so you need to wait until it is
ready...OR...
the formula I've come up with to calculate it is this :
Note that I don't expect this formula is perfect.. and I can
certainly make it more compact and faster by reworking it, but for
working on it I wanted to do it step by step :).
private class LatLonSpans
{
@SuppressWarnings("unused")
public double LatSpan = 0.0;
@SuppressWarnings("unused")
public double LonSpan = 0.0;
}
private LatLonSpans getSpans()
{
LatLonSpans latLonSpans = new LatLonSpans();
Display display = getWindowManager().getDefaultDisplay();
int width = display.getWidth();
int height = display.getHeight();
int zoomLevel = mapView.getZoomLevel();
// zoomToPower times 256 should be equal to the pixels
required to view the entire world
// at the resolution I've set.
double zoomToPower = Math.pow(2, zoomLevel - 1);
// it takes 256 pixels to view the entire world at
resolution 1, so this should be the pixels required to view the
entire world
// at the resolution I've set.
double entireWorld = zoomToPower * 256;
// Now I need to scale the zoomToPower to my screen size to
figure
// out what I'm really going to see.
//
// this is how many pixels to see 1 degree.
double OneDegree = entireWorld / 360;
// and for height we have x pixels minus 40???? to account
for top bars..... so we will see this much of a degree.
double heightSpan = (height - 40) / OneDegree;
double widthSpan = width / OneDegree;
latLonSpans.LatSpan = heightSpan;
latLonSpans.LonSpan = widthSpan;
return latLonSpans;
}
and I'm using it like this :
if (mapView.getLatitudeSpan() == 0)
{
nvps.add(new BasicNameValuePair("latitudespan",
String.valueOf(latLonSpans.LatSpan)));
}
else
{
nvps.add(new BasicNameValuePair("latitudespan",
String.valueOf(latSpan / 1E6)));
}
Hope it helps... and if anyone can poke holes in my formula ..
PLEASE DO... I'd love to know it doesn't work BEFORE I start
relying on it. :).
On 25/06/2010 5:55 PM, Pedro Teixeira wrote:
New approach that makes more sense:
int latSpan = mapView.getLatitudeSpan();
int longSpan = mapView.getLongitudeSpan();
GeoPoint mapCenter = mapView.getMapCenter();
int topLatitude = mapCenter.getLatitudeE6() + (latSpan/2);
int bottomLatitude = mapCenter.getLatitudeE6() - (latSpan/2);
int leftLongitude = mapCenter.getLongitudeE6() - (latSpan/2);
int rightLongitude = mapCenter.getLongitudeE6() + (latSpan/2);
But this values:
int latSpan = mapView.getLatitudeSpan();
int longSpan = mapView.getLongitudeSpan();
are giving me 36000000 and 0 :/
On Jun 25, 2010, at 9:15 PM, Frank Weiss wrote:
Exactly. You need to pass the neLatitude, neLongitude, swLatitude,
swLongitude as query parameters to your back end web service,
which
then returns only POIs whose latitude and longitude fall within
those
bounds, like this Javascript Google Map does:
http://myhome.bankofamerica.com/?findmlo=94114#/findmlo/94105
Notice that it even handles panning and zooming.
--
You received this message because you are subscribed to the Google
Groups "Android Developers" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to
[email protected]
For more options, visit this group at
http://groups.google.com/group/android-developers?hl=en
Pedro Teixeira
www.pedroteixeira.org <http://www.pedroteixeira.org>
--
You received this message because you are subscribed to the Google
Groups "Android Developers" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to
[email protected]
For more options, visit this group at
http://groups.google.com/group/android-developers?hl=en
--
Sincerely,
Brad Gies
-----------------------------------------------------------------------
Bistro Bot - Bistro Blurb
http://www.bgies.com
http://www.bistroblurb.com
http://www.ihottonight.com
-----------------------------------------------------------------------
Never doubt that a small group of thoughtful, committed people can
change the world. Indeed. It is the only thing that ever has -
Margaret Mead
--
You received this message because you are subscribed to the Google
Groups "Android Developers" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to
[email protected]
For more options, visit this group at
http://groups.google.com/group/android-developers?hl=en
Pedro Teixeira
www.pedroteixeira.org
--
Sincerely,
Brad Gies
-----------------------------------------------------------------------
Bistro Bot - Bistro Blurb
http://www.bgies.com
http://www.bistroblurb.com
http://www.ihottonight.com
-----------------------------------------------------------------------
Never doubt that a small group of thoughtful, committed people can
change the world. Indeed. It is the only thing that ever has -
Margaret Mead
--
You received this message because you are subscribed to the Google
Groups "Android Developers" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to
[email protected]
For more options, visit this group at
http://groups.google.com/group/android-developers?hl=en
Pedro Teixeira
www.pedroteixeira.org
--
You received this message because you are subscribed to the Google
Groups "Android Developers" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to
[email protected]
For more options, visit this group at
http://groups.google.com/group/android-developers?hl=en
