Hallo JMC,

> Are you guys sure it's a MIFARE 4k card it's emulating?

Yes, I'm very sure it is emulating a MIFARE Classic 4K card and an APDU
based smart card (depending on the protocol activation level).


> When I put the device in emulation mode and read its ATR, I'm getting:
> 3B 8F 80 01 80 4F 0C A0 00 00 03 06 03 00 00 00 00 00 00 6B

Decoding this PC/SC ATR gives this:
3B ... Contactless card
  8F ... Number of historical bytes: 0xF (15)
  80
  01
    80 ... Category indicator: A status indicator may be present
           in an optional COMPACT-TLV data object.
    4F ... Application identifier Presence indicator
    0C ... Length of application identifier: 0x0C (12)
      Application identifier:
        A0 00 00 03 06 ... RID: PC/SC Working Group
        03 ... Byte for Standard: ISO 14443 A, part 3
        00 00 ... Bytes for Card Name: not in standard
        00 00 00 00 ... RFU (Shall be set to zero)
  6B ... Checksum

This is a typical ATR if the card emulation mode is not activated. I
receive that ATR if I put the phone in peer-to-peer communication mode
(which is the default if card emulation is disabled).


> While I'm actually expecting:
> 3B 8F 80 01 80 4F 0C A0 00 00 03 06 03 00 02 00 00 00 00 69

With the phone you would not normally receive such an ATR for the card
emulation mode either. Usually a contactless smart card reader (like the
Omnikey 5321) activates the contactless smart card up to its highest
supported protocol layer. For the SmartMX, this means that ISO 14443-4
protocol layer is activated for APDU based communication with the
JavaCard. Thus, the ATR generated by the smart card reader would reflect
the properties of the APDU-based JavaCard and not those of the MIFARE 4K
area. This is the value I recieve when card emulation is on:
  3B 8A 80 01 00 31 C1 73 C8 40 00 00 90 00 90


Best regards,
Michael

-- 
You received this message because you are subscribed to the Google
Groups "Android Developers" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to
[email protected]
For more options, visit this group at
http://groups.google.com/group/android-developers?hl=en

Reply via email to