I tried all that you suggested except booting in recovery since I don't have one of the old-style SD cards for it. One thing I neglected to mention is that when I plug in the USB cable the G1 gives the notification "USB debugging connnected; A computer is connected to your phone." I wonder if that in itself rules out it being a hardware issue?
On Apr 6, 9:16 am, Chris Stratton <[email protected]> wrote: > Could be either an electrical failure or a low level usb software failure, > on either the device or pc end, or the cable. > > If the device is running ordinary software, you might try it on another > computer or even another USB port on the same computer (especially > switching between front and rear panel ports). For an > marginal-electrical-performance issue putting a hub in between can get you > a different roll of the dice. > > On the software side, IIRC even with USB debugging not enabled in settings > you would still see something of a USB interface, but that could be > something to check as well. To try a different software environment you > could boot the device to recovery and see if you have USB there. -- You received this message because you are subscribed to the Google Groups "Android Developers" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/android-developers?hl=en
