Hi everybody, i'm trying to connect a remote controller using bluetooth to my Android device and everytime the failure is the same, when the android device sends the SDP ( bluetooth service discovery protocol ) to the remote controller, the remote controller response with the attributes and just a second later the android device sends a disconnection request. Using A2DP profile instead of AVRCP all is working fine. On a ifruit device is working fine using AVRCP or A2DP profiles with the same remote controller.
The question is someone is using avrcp profile on android working well? This picture is a capture from the bluetooth HCI log <https://lh3.googleusercontent.com/-Zet9TqQrQjI/VyxDcxm-NhI/AAAAAAAAAIg/AJObh_MCT6wDIR5okdp6MOU5FG5BWYGhgCLcB/s1600/SDP_GOOGLE.png> Everytime the behaviour is exactly the same the phone connects and after a second send the disconnect request if i'm using AVRCP profile only. It's not possible to use a bluetooth remote controller under Android? I tested this under Android 6.0.1 and 5.1.1 with the same result. -- You received this message because you are subscribed to the Google Groups "Android Developers" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/android-developers. To view this discussion on the web visit https://groups.google.com/d/msgid/android-developers/517e3aa6-8af2-49e7-a281-a5b94ef08808%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
