Are you saying that the following works: emulator -system ./a/b/
While this line doesn't: emulator -system ./a/b/ -kernel x/y/z/kernelImage If so, there is something in your kernel that is preventing the proper mounting of / (a.k.a. system.img), which explains the "cannot find /system/XXXX" messages. You should probably check your kernel configuration to ensure that you have the YAFFS2 drivers compiled in, and probably a lot more things that I don't know much about (I'm not a kernel hacker) By the way, the output of '-verbose', which you didn't provide, is useful to know which system.img and ramdisk.img was picked exactly. This removes a certain level of uncertainty when debugging these problems. I suggest you to check it thoroughly. On Fri, Feb 27, 2009 at 4:04 PM, Joe Petruchi <[email protected]>wrote: > > Hi > I am using the same system.img file which was working fine with the > previous emulator kernel 2.6.25. > > The verbose gives a seg fault for me with both previous and new kernel. The > complete output of show-kernel is given below > > Uncompressing > Linux..................................................................................... > done, booting the kernel. > emulator: emulator window was out of view and was recentred > Linux version 2.6.27 (r...@ubuntu810desktop) (gcc version 4.3.1 (GCC) ) #1 > Thu Feb 26 22:16:35 IST 2009 > CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00003137 > Machine: Goldfish > Memory policy: ECC disabled, Data cache writeback > CPU0: D VIVT write-through cache > CPU0: I cache: 4096 bytes, associativity 4, 32 byte lines, 32 sets > CPU0: D cache: 65536 bytes, associativity 4, 32 byte lines, 512 sets > Built 1 zonelists in Zone order, mobility grouping on. Total pages: 24384 > Kernel command line: qemu=1 console=ttyS0 android.checkjni=1 > android.qemud=ttyS1 android.ndns=1 > Unknown boot option `android.checkjni=1': ignoring > Unknown boot option `android.qemud=ttyS1': ignoring > Unknown boot option `android.ndns=1': ignoring > PID hash table entries: 512 (order: 9, 2048 bytes) > Console: colour dummy device 80x30 > Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) > Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) > Memory: 96MB = 96MB total > Memory: 94040KB available (2412K code, 640K data, 104K init) > Calibrating delay loop... 563.60 BogoMIPS (lpj=2818048) > Mount-cache hash table entries: 512 > CPU: Testing write buffer coherency: ok > net_namespace: 288 bytes > NET: Registered protocol family 16 > NET: Registered protocol family 2 > IP route cache hash table entries: 1024 (order: 0, 4096 bytes) > TCP established hash table entries: 4096 (order: 3, 32768 bytes) > TCP bind hash table entries: 4096 (order: 2, 16384 bytes) > TCP: Hash tables configured (established 4096 bind 4096) > TCP reno registered > NET: Registered protocol family 1 > checking if image is initramfs... it is > Freeing initrd memory: 133K > goldfish_new_pdev goldfish_interrupt_controller at ff000000 irq -1 > goldfish_new_pdev goldfish_device_bus at ff001000 irq 1 > goldfish_new_pdev goldfish_timer at ff003000 irq 3 > goldfish_new_pdev goldfish_rtc at ff010000 irq 10 > goldfish_new_pdev goldfish_tty at ff002000 irq 4 > goldfish_new_pdev goldfish_tty at ff011000 irq 11 > goldfish_new_pdev smc91x at ff012000 irq 12 > goldfish_new_pdev goldfish_fb at ff013000 irq 13 > goldfish_new_pdev goldfish_audio at ff004000 irq 14 > goldfish_new_pdev goldfish_memlog at ff006000 irq -1 > goldfish_new_pdev goldfish-battery at ff014000 irq 15 > goldfish_new_pdev goldfish_events at ff015000 irq 16 > goldfish_new_pdev goldfish_nand at ff016000 irq -1 > goldfish_new_pdev goldfish-switch at ff017000 irq 17 > goldfish_new_pdev goldfish-switch at ff018000 irq 18 > goldfish_pdev_worker registered goldfish-switch > goldfish_pdev_worker registered goldfish-switch > goldfish_pdev_worker registered goldfish_nand > goldfish_pdev_worker registered goldfish_events > goldfish_pdev_worker registered goldfish-battery > goldfish_pdev_worker registered goldfish_memlog > goldfish_pdev_worker registered goldfish_audio > goldfish_pdev_worker registered goldfish_fb > goldfish_pdev_worker registered smc91x > goldfish_pdev_worker registered goldfish_tty > goldfish_pdev_worker registered goldfish_tty > goldfish_pdev_worker registered goldfish_rtc > goldfish_pdev_worker registered goldfish_timer > goldfish_pdev_worker registered goldfish_device_bus > goldfish_pdev_worker registered goldfish_interrupt_controller > goldfish_audio_probe > ashmem: initialized > Installing knfsd (copyright (C) 1996 [email protected]). > yaffs Feb 26 2009 22:13:35 Installing. > msgmni has been set to 184 > io scheduler noop registered > io scheduler anticipatory registered (default) > io scheduler deadline registered > io scheduler cfq registered > allocating frame buffer 320 * 480, got ffc10000 > Console: switching to colour frame buffer device 40x30 > console [ttyS0] enabled > brd: module loaded > loop: module loaded > nbd: registered device at major 43 > logger: created 64K log 'log_main' > logger: created 256K log 'log_events' > logger: created 64K log 'log_radio' > smc91x.c: v1.1, sep 22 2004 by Nicolas Pitre <[email protected]> > eth0: SMC91C11xFD (rev 1) at c6800000 IRQ 12 [nowait] > eth0: Ethernet addr: 52:54:00:12:34:56 > goldfish nand dev0: size 4000000, page 2048, extra 64, erase 131072 > goldfish nand dev1: size 4000000, page 2048, extra 64, erase 131072 > goldfish nand dev2: size 4000000, page 2048, extra 64, erase 131072 > mice: PS/2 mouse device common for all mice > events_probe() addr=0xc6804000 irq=16 > events_probe() keymap=qwerty2 > input: qwerty2 as /devices/virtual/input/input0 > GRE over IPv4 tunneling driver > TCP cubic registered > NET: Registered protocol family 17 > RPC: Registered udp transport module. > RPC: Registered tcp transport module. > 802.1Q VLAN Support v1.8 Ben Greear <[email protected]> > All bugs added by David S. Miller <[email protected]> > VFP support v0.3: implementor 41 architecture 1 part 10 variant 9 rev 0 > goldfish_rtc goldfish_rtc: setting system clock to 2009-02-27 00:27:05 UTC > (1235694425) > Freeing init memory: 104K > init: Unable to open persistent property directory /data/property errno: 2 > init: cannot find '/system/bin/sh', disabling 'console' > init: cannot find '/system/bin/mountd', disabling 'mountd' > init: cannot find '/system/bin/rild', disabling 'ril-daemon' > init: cannot find '/system/bin/app_process', disabling 'zygote' > init: cannot find '/system/bin/playmp3', disabling 'bootsound' > init: cannot find '/system/bin/dbus-daemon', disabling 'dbus' > init: cannot find '/system/bin/flash_image', disabling 'flash_recovery' > init: cannot find '/system/etc/init.goldfish.sh', disabling > 'goldfish-setup' > init: cannot find '/system/bin/qemud', disabling 'qemud' > init: cannot find '/system/bin/logcat', disabling 'goldfish-logcat' > > Hope this helps > > I am suspecting some problem with mount due to which the initial error > occurs with /data/property file but not able to proceed > > Regards > Joe > > > > On Fri, Feb 27, 2009 at 8:08 PM, David Turner <[email protected]> wrote: > >> looks like your system.img image is bad/corrupted. What is the output of >> '-verbose' ? >> >> >> On Fri, Feb 27, 2009 at 11:32 AM, Joe Petruchi >> <[email protected]>wrote: >> >>> Hi Bryne >>> Hi All >>> I was trying to change the kernel for Emulator.I was successful in >>> building the kernel Image(2.6.27) for the Emlator using the Goldfish >>> configuraton. The Emulators kernel is booting up however it stops in the >>> intial Andriod screen. i gave the following command >>> >>> emulator -kernel ./x/y/zImage -system ./a/b/ -show-kernel >>> >>> I saw the kernel messages.. Everything works fine; the init finally fails >>> telling this >>> >>> init: cannot open '/initlogo.rle' >>> init: Unable to open persistent property directory /data/property errno: >>> 2 >>> init: cannot find '/system/bin/servicemanager', disabling >>> 'servicemanager' >>> init: cannot find '/system/bin/mountd', disabling 'mountd' >>> init: cannot find '/system/bin/debuggerd', disabling 'debuggerd' >>> init: cannot find '/system/bin/rild', disabling 'ril-daemon' >>> init: cannot find '/system/bin/app_process', disabling 'zygote' >>> init: cannot find '/system/bin/mediaserver', disabling 'media' >>> init: cannot find '/system/bin/playmp3', disabling 'bootsound' >>> init: cannot find '/system/bin/dbus-daemon', disabling 'dbus' >>> init: cannot find '/system/bin/installd', disabling 'installd' >>> init: cannot find '/system/bin/flash_image', disabling 'flash_recovery' >>> init: cannot find '/system/etc/init.goldfish.sh', disabling >>> 'goldfish-setup' >>> init: cannot find '/system/bin/qemud', disabling 'qemud' >>> init: cannot find '/system/bin/logcat', disabling 'goldfish-logcat' >>> >>> Does any body face the same problem ?? >>> Joe >>> >>> >>> >> >> >> >> >> >> --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "Android Developers" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/android-developers?hl=en -~----------~----~----~----~------~----~------~--~---
