I guess /system/etc/vold.conf is missing from your build. How did you
configure it ?

On Mon, May 4, 2009 at 11:51 PM, Marco Nelissen <marc...@android.com> wrote:

> Well, so what does the system log say? If there's an error mounting the
> card, it's probably going to be logged there.
>
>
>
>
> On Mon, May 4, 2009 at 2:39 PM, dan raaka <danra...@gmail.com> wrote:
>
>> well .. I wish it was the reason !!
>>
>> $ ls -l out/target/product/generic/sdcard*
>> -rwxrwxrwx 1 mankapur mankapur 67108864 2009-05-01 16:56
>> out/target/product/generic/sdcard.img
>> -rw------- 1 mankapur mankapur        6 2009-05-04 11:22
>> out/target/product/generic/sdcard.img.lock
>>
>>
>> On Mon, May 4, 2009 at 12:55 PM, swarup <me.s...@gmail.com> wrote:
>>
>>>
>>> well, just a small test shows that when sdcard.img file is RO, it is
>>> not shown in the mount list.
>>> check the below o/p i got from my set up.
>>>
>>> ===========================================
>>> [swa...@~/.android/avd/mydev.avd/]% chmod -w sdcard.img
>>>
>>> [swa...@~/.android/avd/mydev.avd/]% ls -l
>>>
>>> -r--r--r-- 1 swarup swarup 134217728 2009-04-30 23:36 sdcard.img
>>> -rw------- 1 swarup swarup         5 2009-05-05 00:44 sdcard.img.lock
>>>
>>> [swa...@~/.android/avd/mydev.avd/]% emu #run emulator
>>>
>>> [swa...@~/.android/avd/mydev.avd/]% adb shell mount
>>>
>>> rootfs / rootfs ro 0 0
>>> tmpfs /dev tmpfs rw,mode=755 0 0
>>> devpts /dev/pts devpts rw,mode=600 0 0
>>> proc /proc proc rw 0 0
>>> sysfs /sys sysfs rw 0 0
>>> tmpfs /sqlite_stmt_journals tmpfs rw,size=4096k 0 0
>>> /dev/block/mtdblock0 /system yaffs2 ro 0 0
>>> /dev/block/mtdblock1 /data yaffs2 rw,nosuid,nodev 0 0
>>> /dev/block/mtdblock2 /cache yaffs2 rw,nosuid,nodev 0 0
>>>
>>> [swa...@~/.android/avd/mydev.avd/]% chmod +w sdcard.img
>>>
>>> [swa...@~/.android/avd/mydev.avd/]% ls -l
>>>
>>> -rw-r--r-- 1 swarup swarup 134217728 2009-04-30 23:36 sdcard.img
>>> -rw------- 1 swarup swarup         6 2009-05-05 01:14 sdcard.img.lock
>>>
>>> [swa...@~/.android/avd/mydev.avd/]% emu #run emulator
>>>
>>> [swa...@~/.android/avd/mydev.avd/]% adb shell mount
>>>
>>> rootfs / rootfs ro 0 0
>>> tmpfs /dev tmpfs rw,mode=755 0 0
>>> devpts /dev/pts devpts rw,mode=600 0 0
>>> proc /proc proc rw 0 0
>>> sysfs /sys sysfs rw 0 0
>>> tmpfs /sqlite_stmt_journals tmpfs rw,size=4096k 0 0
>>> /dev/block/mtdblock0 /system yaffs2 ro 0 0
>>> /dev/block/mtdblock1 /data yaffs2 rw,nosuid,nodev 0 0
>>> /dev/block/mtdblock2 /cache yaffs2 rw,nosuid,nodev 0 0
>>> /dev/block//vold/179:0 /sdcard vfat
>>>
>>> rw,dirsync,nosuid,nodev,noexec,uid=1000,gid=1000,fmask=0711,dmask=0700,allow_utime=0022,codepage=cp437,iocharset=iso8859-1,shortname=mixed,utf8
>>> 0 0
>>>
>>> [swa...@~/.android/avd/mydev.avd/]%
>>>
>>> ===========================================
>>> On May 5, 12:42 am, swarup <me.s...@gmail.com> wrote:
>>> > yes Marco, you are write, even for RO sdcard.img files, it should be
>>> > visible for 'mount' command.
>>> > recreation of the sdcard.img might help in resolving the issue.
>>> >
>>> > On May 5, 12:21 am, Marco Nelissen <marc...@android.com> wrote:
>>> >
>>> > > As long as you run the emulator as the user 'owner', it should be
>>> writable.
>>> > > And again: the problem is not that it's mounted read-only, it's that
>>> it's
>>> > > not mounted at all.
>>> > > Your dmesg seems to indicate that no partition was found in your
>>> image. What
>>> > > does the system log say? (logcat)
>>> >
>>> > > On Mon, May 4, 2009 at 12:18 PM, swarup <me.s...@gmail.com> wrote:
>>> >
>>> > > > check the permissions of the ./sdcard.img file.
>>> > > > does it have write permission??
>>> >
>>> > > > -rw-r--r-- 1 owner owner 134217728 2009-04-30 23:36 sdcard.img
>>> >
>>> > > > On May 4, 11:59 pm, dan raaka <danra...@gmail.com> wrote:
>>> > > > > Here goes the dmesg log
>>> >
>>> > > > > $ adb shell dmesg
>>> > > > > <5>Linux version 2.6.27-00110-g132305e (
>>> > > > mikec...@cheetara.corp.google.com)
>>> > > > > (gcc version 4.2.1) #6 Mon Feb 2 12:47:38 PST 2009
>>> > > > > <4>CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00093177
>>> > > > > <4>Machine: Goldfish
>>> > > > > <4>Memory policy: ECC disabled, Data cache writeback
>>> > > > > <7>On node 0 totalpages: 24576
>>> > > > > <7>free_area_init_node: node 0, pgdat c0294734, node_mem_map
>>> c031e000
>>> > > > > <7>  DMA zone: 24384 pages, LIFO batch:3
>>> > > > > <4>CPU0: D VIVT write-through cache
>>> > > > > <4>CPU0: I cache: 4096 bytes, associativity 4, 32 byte lines, 32
>>> sets
>>> > > > > <4>CPU0: D cache: 65536 bytes, associativity 4, 32 byte lines,
>>> 512 sets
>>> > > > > <4>Built 1 zonelists in Zone order, mobility grouping on.  Total
>>> pages:
>>> > > > > 24384
>>> > > > > <5>Kernel command line: qemu=1 console=ttyS0 android.checkjni=1
>>> > > > > android.qemud=ttyS1 android.ndns=1
>>> > > > > <3>Unknown boot option `android.checkjni=1': ignoring
>>> > > > > <3>Unknown boot option `android.qemud=ttyS1': ignoring
>>> > > > > <3>Unknown boot option `android.ndns=1': ignoring
>>> > > > > <4>PID hash table entries: 512 (order: 9, 2048 bytes)
>>> > > > > <4>Console: colour dummy device 80x30
>>> > > > > <6>Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
>>> > > > > <6>Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
>>> > > > > <6>Memory: 96MB = 96MB total
>>> > > > > <5>Memory: 94040KB available (2408K code, 640K data, 104K init)
>>> > > > > <6>Calibrating delay loop... 104.65 BogoMIPS (lpj=523264)
>>> > > > > <4>Mount-cache hash table entries: 512
>>> > > > > <6>CPU: Testing write buffer coherency: ok
>>> > > > > <6>net_namespace: 288 bytes
>>> > > > > <6>NET: Registered protocol family 16
>>> > > > > <7>Switched to high resolution mode on CPU 0
>>> > > > > <6>NET: Registered protocol family 2
>>> > > > > <6>IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
>>> > > > > <6>TCP established hash table entries: 4096 (order: 3, 32768
>>> bytes)
>>> > > > > <6>TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
>>> > > > > <6>TCP: Hash tables configured (established 4096 bind 4096)
>>> > > > > <6>TCP reno registered
>>> > > > > <6>NET: Registered protocol family 1
>>> > > > > <6>checking if image is initramfs... it is
>>> > > > > <6>Freeing initrd memory: 142K
>>> > > > > <4>goldfish_new_pdev goldfish_interrupt_controller at ff000000
>>> irq -1
>>> > > > > <4>goldfish_new_pdev goldfish_device_bus at ff001000 irq 1
>>> > > > > <4>goldfish_new_pdev goldfish_timer at ff003000 irq 3
>>> > > > > <4>goldfish_new_pdev goldfish_rtc at ff010000 irq 10
>>> > > > > <4>goldfish_new_pdev goldfish_tty at ff002000 irq 4
>>> > > > > <4>goldfish_new_pdev goldfish_tty at ff011000 irq 11
>>> > > > > <4>goldfish_new_pdev smc91x at ff012000 irq 12
>>> > > > > <4>goldfish_new_pdev goldfish_fb at ff013000 irq 13
>>> > > > > <4>goldfish_new_pdev goldfish_audio at ff004000 irq 14
>>> > > > > <4>goldfish_new_pdev goldfish_mmc at ff005000 irq 15
>>> > > > > <4>goldfish_new_pdev goldfish_memlog at ff006000 irq -1
>>> > > > > <4>goldfish_new_pdev goldfish-battery at ff014000 irq 16
>>> > > > > <4>goldfish_new_pdev goldfish_events at ff015000 irq 17
>>> > > > > <4>goldfish_new_pdev goldfish_nand at ff016000 irq -1
>>> > > > > <4>goldfish_new_pdev goldfish-switch at ff017000 irq 18
>>> > > > > <4>goldfish_new_pdev goldfish-switch at ff018000 irq 19
>>> > > > > <4>goldfish_pdev_worker registered goldfish-switch
>>> > > > > <4>goldfish_pdev_worker registered goldfish-switch
>>> > > > > <4>goldfish_pdev_worker registered goldfish_nand
>>> > > > > <4>goldfish_pdev_worker registered goldfish_events
>>> > > > > <4>goldfish_pdev_worker registered goldfish-battery
>>> > > > > <4>goldfish_pdev_worker registered goldfish_memlog
>>> > > > > <4>goldfish_pdev_worker registered goldfish_mmc
>>> > > > > <4>goldfish_audio_probe
>>> > > > > <4>goldfish_pdev_worker registered goldfish_audio
>>> > > > > <4>goldfish_pdev_worker registered goldfish_fb
>>> > > > > <4>goldfish_pdev_worker registered smc91x
>>> > > > > <4>goldfish_pdev_worker registered goldfish_tty
>>> > > > > <4>goldfish_pdev_worker registered goldfish_tty
>>> > > > > <4>goldfish_pdev_worker registered goldfish_rtc
>>> > > > > <4>goldfish_pdev_worker registered goldfish_timer
>>> > > > > <4>goldfish_pdev_worker registered goldfish_device_bus
>>> > > > > <4>goldfish_pdev_worker registered goldfish_interrupt_controller
>>> > > > > <6>ashmem: initialized
>>> > > > > <6>Installing knfsd (copyright (C) 1996 o...@monad.swb.de).
>>> > > > > <4>yaffs Feb  2 2009 12:47:30 Installing.
>>> > > > > <6>msgmni has been set to 184
>>> > > > > <6>io scheduler noop registered
>>> > > > > <6>io scheduler anticipatory registered (default)
>>> > > > > <6>io scheduler deadline registered
>>> > > > > <6>io scheduler cfq registered
>>> > > > > <4>allocating frame buffer 320 * 480, got ffc10000
>>> > > > > <4>Console: switching to colour frame buffer device 40x30
>>> > > > > <6>console [ttyS0] enabled
>>> > > > > <6>brd: module loaded
>>> > > > > <6>loop: module loaded
>>> > > > > <6>nbd: registered device at major 43
>>> > > > > <6>logger: created 64K log 'log_main'
>>> > > > > <6>logger: created 256K log 'log_events'
>>> > > > > <6>logger: created 64K log 'log_radio'
>>> > > > > <4>smc91x.c: v1.1, sep 22 2004 by Nicolas Pitre <n...@cam.org>
>>> > > > > <4>No set_type function for IRQ 12 (goldfish)
>>> > > > > <4>eth0: SMC91C11xFD (rev 1) at c6800000 IRQ 12 [nowait]
>>> > > > > <4>eth0: Ethernet addr: 52:54:00:12:34:56
>>> > > > > <7>eth0: No PHY found
>>> > > > > <4>goldfish nand dev0: size 4000000, page 2048, extra 64, erase
>>> 131072
>>> > > > > <4>goldfish nand dev1: size 4000000, page 2048, extra 64, erase
>>> 131072
>>> > > > > <4>goldfish nand dev2: size 4000000, page 2048, extra 64, erase
>>> 131072
>>> > > > > <6>mice: PS/2 mouse device common for all mice
>>> > > > > <4>*** events probe ***
>>> > > > > <4>events_probe() addr=0xc6804000 irq=17
>>> > > > > <4>events_probe() keymap=qwerty2
>>> > > > > <6>input: qwerty2 as /devices/virtual/input/input0
>>> > > > > <6>goldfish_rtc goldfish_rtc: rtc core: registered goldfish_rtc
>>> as rtc0
>>> > > > > <6>mmc0: new SD card at address e118
>>> > > > > <6>mmcblk0: mmc0:e118 SU02G 65536KiB
>>> > > > > <6> mmcblk0:
>>> > > > > <6>IPv4 over IPv4 tunneling driver
>>> > > > > <6>GRE over IPv4 tunneling driver
>>> > > > > <6>TCP cubic registered
>>> > > > > <6>NET: Registered protocol family 17
>>> > > > > <6>RPC: Registered udp transport module.
>>> > > > > <6>RPC: Registered tcp transport module.
>>> > > > > <6>802.1Q VLAN Support v1.8 Ben Greear <gree...@candelatech.com>
>>> > > > > <6>All bugs added by David S. Miller <da...@redhat.com>
>>> > > > > <6>VFP support v0.3: implementor 41 architecture 1 part 10
>>> variant 9 rev
>>> > > > 0
>>> > > > > <6>goldfish_rtc goldfish_rtc: setting system clock to 2009-05-04
>>> 18:22:33
>>> > > > > UTC (1241461353)
>>> > > > > <6>Freeing init memory: 104K
>>> > > > > <3>init: cannot open '/initlogo.rle'
>>> > > > > <6>yaffs: dev is 32505856 name is "mtdblock0"
>>> > > > > <6>yaffs: passed flags ""
>>> > > > > <4>yaffs: Attempting MTD mount on 31.0, "mtdblock0"
>>> > > > > <4>yaffs_read_super: isCheckpointed 0
>>> > > > > <4>save exit: isCheckpointed 1
>>> > > > > <6>yaffs: dev is 32505857 name is "mtdblock1"
>>> > > > > <6>yaffs: passed flags ""
>>> > > > > <4>yaffs: Attempting MTD mount on 31.1, "mtdblock1"
>>> > > > > <4>yaffs_read_super: isCheckpointed 0
>>> > > > > <6>yaffs: dev is 32505858 name is "mtdblock2"
>>> > > > > <6>yaffs: passed flags ""
>>> > > > > <4>yaffs: Attempting MTD mount on 31.2, "mtdblock2"
>>> > > > > <4>yaffs_read_super: isCheckpointed 0
>>> > > > > <3>init: cannot find '/system/bin/playmp3', disabling 'bootsound'
>>> > > > > <6>eth0: link up
>>> > > > > <6>warning: `rild' uses 32-bit capabilities (legacy support in
>>> use)
>>> > > > > <4>select 651 (app_process), adj 15, size 3194, to kill
>>> > > > > <4>select 861 (app_process), adj 15, size 3547, to kill
>>> > > > > <4>send sigkill to 861 (app_process), adj 15, size 3547
>>> > > > > <4>select 741 (app_process), adj 15, size 2916, to kill
>>> > > > > <4>send sigkill to 741 (app_process), adj 15, size 2916
>>> > > > > <4>select 1301 (app_process), adj 15, size 4149, to kill
>>> > > > > <4>send sigkill to 1301 (app_process), adj 15, size 4149
>>> >
>>> > > > > On Mon, May 4, 2009 at 11:53 AM, Marco Nelissen <
>>> marc...@android.com>
>>> > > > wrote:
>>> > > > > > Look in the system log or dmesg.
>>> >
>>> > > > > > On Mon, May 4, 2009 at 11:39 AM, dan raaka <danra...@gmail.com>
>>> wrote:
>>> >
>>> > > > > >> Well the verbose output from the emulator doesn't show
>>> anything
>>> > > > obvious
>>> >
>>> > > > > >> $ emulator -sdcard ./sdcard.img -scale 0.75 -verbose&
>>> > > > > >> [2] 21528
>>> > > > > >> emulator: found Android build root:
>>> > > > /home/danraaka/BuildDir/cupcakeFinal
>>> > > > > >> emulator: found Android build out:
>>> > > > > >>
>>> /home/danraaka/BuildDir/cupcakeFinal/out/target/product/generic
>>> > > > > >> emulator:     locking user data image at
>>> >
>>> > > >
>>> /home/danraaka/BuildDir/cupcakeFinal/out/target/product/generic/userdata-qemu.img
>>> > > > > >> emulator:     locking SD Card image at ./sdcard.img
>>> > > > > >> emulator: selecting default skin name 'HVGA'
>>> > > > > >> emulator: autoconfig: -skin HVGA
>>> > > > > >> emulator: autoconfig: -skindir
>>> > > > > >>
>>> /home/danraaka/BuildDir/cupcakeFinal/development/emulator/skins
>>> > > > > >> emulator: keyset loaded from:
>>> /home/danraaka/.android/default.keyset
>>> > > > > >> emulator: trying to load skin file
>>> >
>>> > > >
>>> '/home/danraaka/BuildDir/cupcakeFinal/development/emulator/skins/HVGA/layout
>>> > > > > >> '
>>> > > > > >> emulator: skin network speed: 'full'
>>> > > > > >> emulator: skin network delay: 'none'
>>> > > > > >> emulator: argv[00] = "emulator"
>>> > > > > >> emulator: argv[01]
>>> >
>>> > ...
>>> >
>>> > read more ยป
>>>
>>>
>>
>>
>>
>
> >
>

--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google
Groups "Android Developers" group.
To post to this group, send email to android-developers@googlegroups.com
To unsubscribe from this group, send email to
android-developers-unsubscr...@googlegroups.com
For more options, visit this group at
http://groups.google.com/group/android-developers?hl=en
-~----------~----~----~----~------~----~------~--~---

Reply via email to