Hi Frank, Thanks for the reply.
The build did not crash without the USB cable. Without the USB cable connected to the host, i was able to get the Android boot screen. I got the prebuilt images from the site, http://code.google.com/p/rowboat/. Could there be some problem with the kernel image of the build? Should i download the source and rebuild it ? Regrads,, Satish. On Jun 2, 1:30 pm, FrankG <[email protected]> wrote: > Did it crash without the cable ? > > From someone you got the flash tool, the details how to flash the > devise and I assume > also a orginal complete working build for this device. > > I would suggest you to a) run the device with the orginal build and > save the kernel messages and then b) run your own build and save > them and after that compare them to see what can be the problem. > > You should also check with modinfo the Kernel Objects (*.ko), maybe > "vermagic" > is modified through your Source Control System ? > > Good luck ! Frank > > On 1 Jun., 12:54, PP <[email protected]> wrote: > > > Hi All, > > > I have Omap3530 evm running Android 2.1. I want to install application > > on the evm, so i connected the evm to the host through the USB OTG > > cable, but the kernel is crashing. Kindly help me out in sorting this > > issue. Find the log below: > > > OMAP3_EVM # > > OMAP3_EVM # > > OMAP3_EVM # setenv bootargs 'init=/init console=ttyS0,115200n8 root=/ > > dev/mmcblk > > 0p2 rw rootwait mem=256M noinitrd androidboot.console=ttyS0 > > mpurate=720' > > OMAP3_EVM # setenv bootcmd 'mmcinit; fatload mmc 0 0x80100000 uImage; > > bootm 0x80 > > 100000' > > OMAP3_EVM # boot > > reading uImage > > > 2489828 bytes read > > ## Booting kernel from Legacy Image at 80100000 ... > > Image Name: Linux-2.6.32 > > Image Type: ARM Linux Kernel Image (uncompressed) > > Data Size: 2489764 Bytes = 2.4 MB > > Load Address: 80008000 > > Entry Point: 80008000 > > Verifying Checksum ... OK > > Loading Kernel Image ... OK > > OK > > > Starting kernel ... > > > Uncompressing > > Linux............................................................. > > ................................................................................ > > ............... done, booting the kernel. > > Linux version 2.6.32 (r...@khasim-laptop) (gcc version 4.4.0 (GCC) ) > > #2 Thu May > > 20 18:31:19 IST 2010 > > CPU: ARMv7 Processor [411fc083] revision 3 (ARMv7), cr=10c53c7f > > CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache > > Machine: OMAP3 EVM > > Memory policy: ECC disabled, Data cache writeback > > OMAP3430/3530 ES3.1 (l2cache iva sgx neon isp 720m ) > > SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0x100000 > > Reserving 4194304 bytes SDRAM for VRAM > > Built 1 zonelists in Zone order, mobility grouping on. Total pages: > > 65024 > > Kernel command line: init=/init console=ttyS0,115200n8 root=/dev/ > > mmcblk0p2 rw ro > > otwait mem=256M noinitrd androidboot.console=ttyS0 mpurate=720 > > PID hash table entries: 1024 (order: 0, 4096 bytes) > > Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) > > Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) > > Memory: 256MB = 256MB total > > Memory: 250112KB available (4292K code, 825K data, 176K init, 0K > > highmem) > > Hierarchical RCU implementation. > > NR_IRQS:402 > > Clocking rate (Crystal/Core/MPU): 26.0/332/500 MHz > > Reprogramming SDRC clock to 332000000 Hz > > GPMC revision 5.0 > > IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts > > Total of 96 interrupts on 1 active controller > > OMAP GPIO hardware version 2.5 > > OMAP clockevent source: GPTIMER1 at 32768 Hz > > Console: colour dummy device 80x30 > > Calibrating delay loop... 499.92 BogoMIPS (lpj=1949696) > > Mount-cache hash table entries: 512 > > CPU: Testing write buffer coherency: ok > > regulator: core version 0.5 > > NET: Registered protocol family 16 > > Target VDD1 OPP = 6, VDD2 OPP = 3 > > omap3evmdc: Driver registration complete > > OMAP DMA hardware revision 4.0 > > bio: create slab <bio-0> at 0 > > SCSI subsystem initialized > > usbcore: registered new interface driver usbfs > > usbcore: registered new interface driver hub > > usbcore: registered new device driver usb > > i2c_omap i2c_omap.1: bus 1 rev3.12 at 2600 kHz > > twl4030: PIH (irq 7) chaining IRQs 368..375 > > twl4030: power (irq 373) chaining IRQs 376..383 > > twl4030: gpio (irq 368) chaining IRQs 384..401 > > regulator: VMMC1: 1850 <--> 3150 mV normal standby > > regulator: VDAC: 1800 mV normal standby > > regulator: VAUX2_4030: 2800 mV normal standby > > regulator: VPLL2: 1800 mV normal standby > > regulator: VSIM: 1800 <--> 3000 mV normal standby > > i2c_omap i2c_omap.2: bus 2 rev3.12 at 400 kHz > > i2c_omap i2c_omap.3: bus 3 rev3.12 at 400 kHz > > Switching to clocksource 32k_counter > > musb_hdrc: version 6.0, musb-dma, otg (peripheral+host), debug=0 > > musb_hdrc: USB OTG mode controller at fa0ab000 using DMA, IRQ 92 > > musb_hdrc musb_hdrc: MUSB HDRC host driver > > musb_hdrc musb_hdrc: new USB bus registered, assigned bus number 1 > > usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 > > usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > > usb usb1: Product: MUSB HDRC host driver > > usb usb1: Manufacturer: Linux 2.6.32 musb-hcd > > usb usb1: SerialNumber: musb_hdrc > > hub 1-0:1.0: USB hub found > > hub 1-0:1.0: 1 port detected > > NET: Registered protocol family 2 > > IP route cache hash table entries: 2048 (order: 1, 8192 bytes) > > TCP established hash table entries: 8192 (order: 4, 65536 bytes) > > TCP bind hash table entries: 8192 (order: 3, 32768 bytes) > > TCP: Hash tables configured (established 8192 bind 8192) > > TCP reno registered > > UDP hash table entries: 256 (order: 0, 4096 bytes) > > UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) > > NET: Registered protocol family 1 > > RPC: Registered udp transport module. > > RPC: Registered tcp transport module. > > RPC: Registered tcp NFSv4.1 backchannel transport module. > > omap-iommu omap-iommu.0: isp registered > > OMAP35x Linux PSP version 03.00.00.05 (OMAP3EVM) > > NetWinder Floating Point Emulator V0.97 (double precision) > > ashmem: initialized > > VFS: Disk quotas dquot_6.5.2 > > Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) > > JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc. > > msgmni has been set to 488 > > alg: No test for stdrng (krng) > > io scheduler noop registered > > io scheduler deadline registered > > io scheduler cfq registered (default) > > OMAP DSS rev 2.0 > > OMAP DISPC rev 3.0 > > OMAP VENC rev 2 > > OMAP DSI rev 1.0 > > Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled > > serial8250.0: ttyS0 at MMIO 0x4806a000 (irq = 72) is a ST16654 > > console [ttyS0] enabled > > serial8250.1: ttyS1 at MMIO 0x4806c000 (irq = 73) is a ST16654 > > serial8250.2: ttyS2 at MMIO 0x49020000 (irq = 74) is a ST16654 > > brd: module loaded > > loop: module loaded > > omap2-nand driver initializing > > NAND device: Manufacturer ID: 0x2c, Chip ID: 0xba (Micron NAND 256MiB > > 1,8V 16-bi > > t) > > Creating 5 MTD partitions on "omap2-nand.0": > > 0x000000000000-0x000000080000 : "xloader-nand" > > 0x000000080000-0x000000240000 : "uboot-nand" > > 0x000000240000-0x000000280000 : "params-nand" > > 0x000000280000-0x000000780000 : "linux-nand" > > 0x000000780000-0x000010000000 : "jffs2-nand" > > OneNAND driver initializing > > omap2-onenand omap2-onenand: Cannot request GPMC CS > > omap2-onenand: probe of omap2-onenand failed with error -16 > > smsc911x: Driver version 2008-10-21. > > smsc911x-mdio: probed > > eth0: attached PHY driver [Generic PHY] (mii_bus:phy_addr=ffffffff:01, > > irq=-1) > > net eth0: MAC Address: 00:50:c2:7e:91:4a > > usbcore: registered new interface driver cdc_ether > > usbcore: registered new interface driver dm9601 > > ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver > > ehci-omap ehci-omap.0: OMAP-EHCI Host Controller > > ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 2 > > ehci-omap ehci-omap.0: irq 77, io mem 0x48064800 > > ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00 > > usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 > > usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > > usb usb2: Product: OMAP-EHCI Host Controller > > usb usb2: Manufacturer: Linux 2.6.32 ehci_hcd > > usb usb2: SerialNumber: ehci-omap.0 > > hub 2-0:1.0: USB hub found > > hub 2-0:1.0: 3 ports detected > > Initializing USB Mass Storage driver... > > usbcore: registered new interface driver usb-storage > > USB Mass Storage support registered. > > usbcore: registered new interface driver usbtest > > android init > > f_acm init > > android_register_function acm > > f_adb init > > android_register_function adb > > f_mass_storage init > > android_register_function usb_mass_storage > > f_rndis init > > android_register_function rndis > > input: TWL4030 Keypad as /devices/platform/i2c_omap.1/i2c-1/1-004a/ > > twl4030_keypa > > d/input/input0 > > ads7846 spi1.0: touchscreen, irq 335 > > input: ADS7846 Touchscreen as /devices/platform/omap2_mcspi.1/spi1.0/ > > input/input > > 1 > > using rtc device, twl_rtc, for alarms > > twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0 > > twl_rtc twl_rtc: Power up reset detected. > > twl_rtc twl_rtc: Enabling TWL-RTC. > > i2c /dev entries driver > > Linux video capture interface: v2.00 > > tvp514x 3-005c: Registered to v4l2 master omap34xxcam!! > > omap-iommu omap-iommu.0: isp: version 1.1 > > usbcore: registered new interface driver uvcvideo > > USB Video Class driver (v0.1.0) > > OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec > > usbcore: registered new interface driver usbhid > > usbhid: USB HID core driver > > logger: created 64K log 'log_main' > > logger: created 256K log 'log_events' > > logger: created 64K log 'log_radio' > > logger: created 64K log 'log_system' > > Advanced Linux Sound Architecture Driver Version 1.0.21. > > usbcore: registered new interface driver snd-usb-audio > > No device for DAI omap-mcbsp-dai-0 > > No device for DAI omap-mcbsp-dai-1 > > No device for DAI omap-mcbsp-dai-2 > > No device for DAI omap-mcbsp-dai-3 > > No device for DAI omap-mcbsp-dai-4 > > OMAP3 EVM SoC init > > asoc: twl4030 <-> omap-mcbsp-dai-0 mapping ok > > ALSA device list: > > #0: omap3evm (twl4030) > > TCP cubic registered > > NET: Registered protocol family 17 > > NET: Registered protocol family 15 > > Power Management for TI OMAP3. > > ------------[ cut here ]------------ > > WARNING: at arch/arm/mach-omap2/dpll.c:439 > > ... > > read more » -- You received this message because you are subscribed to the Google Groups "Android Developers" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/android-developers?hl=en
