This happens to me often. Boot into NAND (Press and hold Power button,
then while still pressing the Power button, press and hold AUX button
for 5 to 8 seconds) or NOR (opposite button sequence as NAND) and select
boot. It works at least. Not sure what the root of the problem is.
Marcus
Joerg Lippmann wrote:
Am Samstag 28 Februar 2009 schrieb Harry Mutch:
Make sure you have also flashed the v13 kernel. You do not need to
connected to your linux box at boot to use adb. Use usb networking to
connect - see OpenMoko Wiki for details
The 14fs.3/13bin combination works. If you are having problems
booting try cleaning your SD card - you should always do this when
testing new a set-up anyway.
I did all that, flashed the v13-Kernel and cleaned the card, as always. Problem
is that the freerunner does not boot completely while plugged in. It gets
stuck while showing the orange openmoko-Logo. That also happened with other
distributions.
So at the moment there's no possibility for me to use adb.
_______________________________________________
android-freerunner mailing list
[email protected]
http://android.koolu.org/listinfo.cgi/android-freerunner-koolu.org
