Hi Brian, I also met this problem, I have really adjusted u-boot for more than 2MB's kernel image, using the tips "What if I borked my bootloader environment and don't get a prompt anymore? " from "http://wiki.openmoko.org/wiki/U-boot"; the config file is "gta02-moredrivers-defconfig". the log as following:
U-Boot 1.3.2-moko12 (Jan 20 2009 - 09:14:46) I2C: ready DRAM: 128 MB Flash: 2 MB NAND: 256 MiB Found Environment offset in OOB.. Glamo core device ID: 0x3650, Revision 0x0002 USB: S3C2410 USB Deviced Uncompressing Linux...................... done, booting the kernel. ...... //ignored [21474541.130000] mmc1: new high speed SD card at address b368 [21474541.140000] mmcblk0: mmc1:b368 SMI 486 MiB [21474541.145000] mmcblk0:<6>pcf50633-rtc pcf50633-rtc: setting system clock to 2000-02-01 02:45:22 UTC (949373122) [21474541.165000] p1 p2 [21474544.275000] RCU detected CPU 0 stall (t=4294908855/600 jiffies) [21474544.275000] [<c0038924>] (dump_stack+0x0/0x14) from [<c0086630>] (print_cpu_stall+0x40/0xa4) [21474544.275000] [<c00865f0>] (print_cpu_stall+0x0/0xa4) from [<c00866f4>] (check_cpu_stall+0x60/0x84) [21474544.275000] r6:c781c020 r5:00000000 r4:c04e96f8 [21474544.275000] [<c0086694>] (check_cpu_stall+0x0/0x84) from [<c0086730>] (__rcu_pending+0x18/0xa4) [21474544.275000] r5:c04e96f8 r4:c09beaac [21474544.275000] [<c0086718>] (__rcu_pending+0x0/0xa4) from [<c00867d4>] (rcu_pending+0x18/0x4c) [21474544.275000] r5:00000000 r4:00000000 [21474544.275000] [<c00867bc>] (rcu_pending+0x0/0x4c) from [<c0060980>] (update_process_times+0x40/0x64) [21474544.275000] [<c0060940>] (update_process_times+0x0/0x64) from [<c0037e00>] (timer_tick+0xf4/0x11c) [21474544.275000] r6:00000000 r5:00000000 r4:c04e6d44 [21474544.275000] [<c0037d0c>] (timer_tick+0x0/0x11c) from [<c004531c>] (s3c2410_timer_interrupt+0x10/0x18) [21474544.275000] r5:00000000 r4:c04e451c [21474544.275000] [<c004530c>] (s3c2410_timer_interrupt+0x0/0x18) from [<c0083b58>] (handle_IRQ_event+0x2c/0x68) [21474544.275000] [<c0083b2c>] (handle_IRQ_event+0x0/0x68) from [<c00857fc>] (handle_edge_irq+0xf8/0x17c) [21474544.275000] r7:c04e7ea4 r6:c04e451c r5:0000001e r4:c04e7e70 [21474544.275000] [<c0085704>] (handle_edge_irq+0x0/0x17c) from [<c0033064>] (__exception_text_start+0x64/0x84) [21474544.275000] r8:00000001 r7:00000002 r6:00004000 r5:00000000 r4:0000001e [21474544.275000] [<c0033000>] (__exception_text_start+0x0/0x84) from [<c0033978>] (__irq_svc+0x38/0xc8) [21474544.275000] Exception stack(0xc781f9f0 to 0xc781fa38) [21474544.275000] f9e0: c8a00010 c7b9e65c 00000104 701fc33f [21474544.275000] fa00: dcc5dc18 c7b9ea8c c79aa720 00000008 c79d5400 c79c2000 00000003 c781fa5c [21474544.275000] fa20: 8c246051 c781fa38 2260b382 c01a9144 20000013 ffffffff [21474544.275000] r5:f4000000 r4:ffffffff [21474544.275000] [<c023be94>] (s3c2440_nand_read_buf+0x0/0x64) from [<c02357bc>] (nand_read_page_raw+0x24/0x40) [21474544.275000] r6:000036fd r5:c79d5400 r4:c79d54bc [21474544.275000] [<c0235798>] (nand_read_page_raw+0x0/0x40) from [<c0235818>] (nand_read_page_swecc+0x40/0x120) [21474544.275000] r5:c79d54bc r4:00000800 [21474544.275000] [<c02357d8>] (nand_read_page_swecc+0x0/0x120) from [<c02389b8>] (nand_do_read_ops+0x200/0x424) [21474544.275000] [<c02387b8>] (nand_do_read_ops+0x0/0x424) from [<c0238d54>] (nand_read+0x9c/0xc0) [21474544.275000] [<c0238cb8>] (nand_read+0x0/0xc0) from [<c022975c>] (part_read+0xa0/0xd4) [21474544.275000] [<c02296bc>] (part_read+0x0/0xd4) from [<c0180db4>] (jffs2_flash_read+0x84/0x250) [21474544.275000] r7:00000000 r6:01200574 r5:c7b80280 r4:c781fbf4 [21474544.275000] [<c0180d30>] (jffs2_flash_read+0x0/0x250) from [<c017a6c0>] (jffs2_fill_scan_buf+0x2c/0x4c) [21474544.275000] [<c017a694>] (jffs2_fill_scan_buf+0x0/0x4c) from [<c017addc>] (jffs2_scan_eraseblock+0x424/0xb50) [21474544.275000] r4:01200280 Thanks. Yuping >Hi Aditya, >The kernel may be too large for your u-boot boot loader. Please either >edit the u-boot environment to load more than 2MB, or install qi. >We are looking at migrating over completely to Qi. Marcelo is in the >process of having it included in our git for compilation. >Regards, >Brian >On 17-Mar-09, at 6:18 AM, podila aditya wrote: > hi Team > > RFS Code Base > > <remote name="korg" > fetch="git://android.git.kernel.org/" > review="review.source.android.com" /> > <default revision="release-1.0" > remote="korg" /> > > <remote name="koolu" > fetch="git://git.koolu.org"/> > > <project path="build" name="platform/build" remote="koolu" > revision="koolu-1.0"> > <copyfile src="core/root.mk" dest="Makefile" /> > </project> > > > > > Kernel Branch > > * koolu-1.0 > > > well my image size for > > 1. Kernel uImage-GTA02.bin is 2.0 MB > 2. RootFS ::androidfs_FileSys160309.jffs2 is 30.7 MB > > I am not able to boot the Device > 1. Kernel Check Sum verification is OK > 2. Once the Kernel image is loaded it does not proceede to load the > Root file system > > Please help me in this regards. > > -- > Warm Regards, > Aditya > __________________ _______________________________________________ android-freerunner mailing list [email protected] http://android.koolu.org/listinfo.cgi/android-freerunner-koolu.org
