Hi Franz, good job so far! =)
I tried getting it to work on my BlueAngel with your packages. Kernel boots fine, but it stops at <6>[ 62.270000] Freeing init memory: 104K. No error message mounting "/" though. Any idea? - Tarwin fbettag schrieb: > By now i got Android UI booting perfectly (http://picpaste.de/ > IMG_0093.JPG). > > As you can see on the Screenshot, it boots fine. It also seems to get > interactions from the cursorpad i got in the lower center as i can > move down the 3 main entries as well as the turn off screen. All other > buttons don't do anything (not even the "enter" Button which is in the > middle of the cursorpad). > > What i did: > - took the Kernel from handhelds.org (2.6.21-hh20) with > htcblueangel_defconfig > - patched it with > http://android-on-n8xx.googlecode.com/files/linux-2.6.21_rx-34_android-m5-rc14-patch3.bz2 > - i didn't find a plain patch so i applied this one. Benno's > android.diff is for 2.6.23 and causes some trouble. > - activated Android specific settings and compiled it > - created the userland-img like in > http://www.alextreme.org/drupal/?q=android_on_n810 > - copied the compiled busybox > - used haret to boot the kernel off the sd-card > > > There are 4 input devices found: > [ 1.040000] input: blueangelkb as /class/input/input0 > [ 1.770000] input: gpio-keys as /class/input/input1 > [ 2.110000] 9<6>input: tsc2200-keys as /class/input/input2 > [ 2.160000] input: tsc2200-ts as /class/input/input3 > > > Altogether i've put up two tbz2: > > - http://evil-packet.org/android/vfat-bootloader-kernel.tbz2 > Just copy this to the vfat partition (first partition) on your SD- > Card. > Android will autoboot as soon you plug the card into your BA. > > - http://evil-packet.org/android/ext2-android-htc-blueangel-arm.tbz2 > Copy it to the ext2 partition (second partition) on your SD-Card. > /bin contains busybox with the according symlinks. > I moved /init (android loader) to /sbin/android. > And i also cross compiled strace and dropbear (which doesn't work > yet). > > My /sbin/init is to be customized with your own start-stop stuff. > > If you boot Android while your BlueAngel is in it's USB Cradle and > your Linux Computer on the other end got USBnet (so that usb0 appears > on both devices), then my /sbin/init will configure usb0 with > 192.168.1.201/24 and start telnetd. The default root password is > "android". > > I think this is a fairly good base to start of hacking for this > device :) Let's do it. > > > Finally i got some questions google.com couldn't answer me: > > - What ANDROID_ environment-variables are there? > - What does it take to make my TS Input Device (tsc2200) available? > > > > Here are several outputs: > > --- dmesg --- > > <5>Linux version 2.6.21-hh20-omap1 ([EMAIL PROTECTED]) (gcc version > 4.2.3 (Sourcery G++ Lite 2008q1-126)) #5 PREEMPT Sun Aug 3 21:26:21 > CEST 2008 > <4>CPU: XScale-PXA255 [69052d06] revision 6 (ARMv5TE), cr=0000397f > <4>Machine: HTC Blueangel > <4>Memory policy: ECC disabled, Data cache writeback > <7>On node 0 totalpages: 32768 > <7> DMA zone: 256 pages used for memmap > <7> DMA zone: 0 pages reserved > <7> DMA zone: 32512 pages, LIFO batch:7 > <7> Normal zone: 0 pages used for memmap > <6>Memory clock: 99.53MHz (*27) > <6>Run Mode clock: 398.13MHz (*4) > <6>Turbo Mode clock: 398.13MHz (*1.0, inactive) > <4>CKEN=0x10a71 CKEN11_USB=0x800 > <4>CKEN=0x10a71 > <4>CPU0: D VIVT undefined 5 cache > <4>CPU0: I cache: 32768 bytes, associativity 32, 32 byte lines, 32 > sets > <4>CPU0: D cache: 32768 bytes, associativity 32, 32 byte lines, 32 > sets > <4>Built 1 zonelists. Total pages: 32512 > <5>Kernel command line: root=/dev/mmcblk0p2 rootdelay=10 > console=ttyS0,115200n8 console=tty0 > <4>PID hash table entries: 512 (order: 9, 2048 bytes) > <4>Console: colour dummy device 80x30 > <4>Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) > <4>Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) > <6>Memory: 128MB = 128MB total > <5>Memory: 126336KB available (2868K code, 502K data, 104K init) > <7>Calibrating delay loop... 397.31 BogoMIPS (lpj=1986560) > <4>Mount-cache hash table entries: 512 > <6>CPU: Testing write buffer coherency: ok > <4>android_power_init > <4>android_power_init done > <6>NET: Registered protocol family 16 > <6>[ 0.420000] asic3: using irq 108-177 on irq 26 > <4>[ 0.430000] Initializing blueangel tsc2200 ssp... done > <4>[ 0.440000] tsc2200_probe: SPI: cr0 0000138f cr1 60000010 sr: > 0000f024 it: 00000000 to: 00000000 ps: 00000000 > <6>[ 0.470000] Bluetooth: Core ver 2.11 > <6>[ 0.470000] NET: Registered protocol family 31 > <6>[ 0.480000] Bluetooth: HCI device and connection manager > initialized > <6>[ 0.490000] Bluetooth: HCI socket layer initialized > <6>[ 0.510000] Time: pxa_timer clocksource has been installed. > <4>[ 0.520000] pxa2xx-udc-gpio: Generic driver for GPIO-controlled > PXA2xx UDC > <6>[ 0.530000] NET: Registered protocol family 2 > <4>[ 0.640000] IP route cache hash table entries: 1024 (order: 0, > 4096 bytes) > <4>[ 0.650000] TCP established hash table entries: 4096 (order: 3, > 32768 bytes) > <4>[ 0.660000] TCP bind hash table entries: 4096 (order: 2, 16384 > bytes) > <6>[ 0.670000] TCP: Hash tables configured (established 4096 bind > 4096) > <6>[ 0.680000] TCP reno registered > <4>[ 0.720000] blueangel_lcd_init > <4>[ 0.720000] Blue Angel Board ID 0x6 > <4>[ 0.730000] in blueangel_lcd_probe > <4>[ 0.740000] HTC Blueangel DS1WM driver > <4>[ 0.740000] blueangel_pcmcia_socket_init > <4>[ 0.750000] blueangel_pcmcia_configure_socket > <4>[ 0.760000] Reset:0 ,Vcc:0 ,Flags:0 > <4>[ 1.030000] blueangel_pm_init > <4>[ 1.030000] retval=0 > <6>[ 1.040000] input: blueangelkb as /class/input/input0 > <5>[ 1.050000] Probing PXA Flash 1 at physical address 0x00000000 > (32-bit bankwidth) > <4>[ 1.060000] mymtd=00000000 > <6>[ 1.070000] ttyS8 at MMIO 0x10800000 (irq = 91) is a DPRAM > <4>[ 1.080000] dpram hwident: 'HTC-DPRAM ASIC P/N:30H80037-00-L' > <5>[ 1.090000] HTC Blueangel Phone Modem Driver > <6>[ 1.090000] PXA CPU frequency change support initialized > <4>[ 1.110000] NetWinder Floating Point Emulator V0.97 (double > precision) > <6>[ 1.120000] JFFS2 version 2.2. (NAND) (C) 2001-2006 Red Hat, > Inc. > <6>[ 1.140000] io scheduler noop registered > <6>[ 1.140000] io scheduler anticipatory registered (default) > <6>[ 1.150000] io scheduler deadline registered > <4>[ 1.160000] Corgi Backlight Driver Initialized. > <4>[ 1.170000] Found w3200 at 0x08000000. > <4>[ 1.210000] blueangel_pcmcia_configure_socket > <4>[ 1.220000] Reset:0 ,Vcc:50 ,Flags:0 > <4>[ 1.230000] Console: switching to colour frame buffer device > 60x53 > <6>[ 1.250000] fb0: w100fb frame buffer device > <6>[ 1.400000] TI Calypso / HTC firmware GSM UART line discipline > ver 0.1<6>pxa2xx-uart.0: ttyS0 at MMIO 0x40100000 (irq = 15) is a > FFUART > <6>[ 1.420000] pxa2xx-uart.1: ttyS1 at MMIO 0x40200000 (irq = 14) > is a BTUART > <6>[ 1.440000] pxa2xx-uart.2: ttyS2 at MMIO 0x40700000 (irq = 13) > is a STUART > <6>[ 1.450000] pxa2xx-uart.3: ttyS3 at MMIO 0x41600000 (irq = 0) is > a HWUART > <6>[ 1.470000] pxa2xx-ir-serial: Initialized > <4>[ 1.480000] RAMDISK driver initialized: 4 RAM disks of 8192K > size 1024 blocksize > <6>[ 1.500000] loop: loaded (max 8 devices) > <6>[ 1.510000] tun: Universal TUN/TAP device driver, 1.6 > <6>[ 1.520000] tun: (C) 1999-2004 Max Krasnyansky > <[EMAIL PROTECTED]> > <4>[ 1.530000] acx: this driver is still EXPERIMENTAL > <4>[ 1.530000] acx: reading README file and/or Craig's HOWTO is > recommended, visit http://acx100.sf.net in case of further questions/ > discussion > <7>[ 1.560000] acxcs_init() > <6>[ 1.570000] I2C: i2c-0: PXA I2C adapter > <6>[ 1.580000] pxa2xx_udc: version 4-May-2005 > <7>[ 1.600000] DPM: pda_udc: Turning off port > <4>[ 1.600000] ether gadget: using random self ethernet address > <4>[ 1.630000] ether gadget: using random host ethernet address > <4>[ 1.650000] blueangel_pcmcia_configure_socket > <4>[ 1.670000] Reset:1 ,Vcc:50 ,Flags:240 > <4>[ 1.680000] blueangel_pcmcia_configure_socket > <4>[ 1.700000] Reset:0 ,Vcc:50 ,Flags:200 > <6>[ 1.710000] usb0: Ethernet Gadget, version: May Day 2005 > <6>[ 1.730000] usb0: using pxa2xx_udc, OUT ep2out-bulk IN ep1in- > bulk > <6>[ 1.750000] usb0: MAC 1e:bf:a5:a0:28:2d > <7>[ 1.770000] DPM: pda_udc: Turning on port > <6>[ 1.780000] input: gpio-keys as /class/input/input1 > <4>[ 1.780000] pxa_gpiodev_get_value(8) > <4>[ 1.810000] Registering tsc2200 buttons driver > <5>[ 1.820000] pccard: PCMCIA card inserted into slot 0 > <5>[ 1.840000] pcmcia: registering new device pcmcia0.0 > <7>[ 1.860000] acx_attach() > <7>[ 1.860000] acx_cs_config(0xc0622600) > <6>[ 1.870000] MEMORY WINDOW FOUND!!! > <6>[ 1.880000] requesting Irq... > <4>[ 1.890000] pcmcia: request for exclusive IRQ could not be > fulfilled. > <4>[ 1.920000] pcmcia: the driver needs updating to supported > shared IRQ lines. > <4>[ 1.950000] blueangel_pcmcia_configure_socket > <4>[ 1.960000] Reset:0 ,Vcc:50 ,Flags:200 > <4>[ 1.980000] blueangel_pcmcia_configure_socket > <4>[ 1.990000] Reset:0 ,Vcc:50 ,Flags:220 > <7>[ 2.050000] RequestConfiguration OK > <4>[ 2.050000] acx: found ACX100-based wireless network card > <7>[ 2.070000] initial debug setting is 0x000A > <6>[ 2.070000] memwinbase=2c000000 memwinsize=4096 > <7>[ 2.080000] using IRQ 40 > <4>[ 2.110000] ACX radio type 0x0d > <7>[ 2.120000] requesting firmware image 'WLANGEN.BIN' > <4>[ 2.120000] 9<6>input: tsc2200-keys as /class/input/input2 > <4>[ 2.150000] tsc2200_ts_probe IRQ: 39 > <6>[ 2.170000] input: tsc2200-ts as /class/input/input3 > <7>[ 2.190000] sa1100-rtc sa1100-rtc: rtc intf: sysfs > <7>[ 2.190000] sa1100-rtc sa1100-rtc: rtc intf: proc > <7>[ 2.200000] sa1100-rtc sa1100-rtc: rtc intf: dev (254:0) > <6>[ 2.200000] sa1100-rtc sa1100-rtc: rtc core: registered sa1100- > rtc as rtc0 > <6>[ 2.230000] Driver for 1-wire Dallas network protocol. > <4>[ 2.250000] DS1WM w1 busmaster driver - (c) 2004 Szabolcs Gyurko > <4>[ 2.280000] blueangel_ds1wm: OWM_EN Low (active) > <6>[ 2.310000] 1-Wire driver for the DS2760 battery monitor chip > - (c) 2004-2005, Szabolcs Gyurko > <4>[ 2.340000] blueangel_set_charge: enabled=1 > <6>[ 2.360000] APM Battery Driver > <6>[ 2.370000] Bluetooth: HCI UART driver ver 2.2 > <6>[ 2.390000] Bluetooth: HCI H4 protocol initialized > <6>[ 2.400000] Bluetooth: HCI BCSP protocol initialized > <6>[ 2.420000] Registered led device: blueangel:red > <6>[ 2.440000] Registered led device: blueangel:green > <6>[ 2.460000] Registered led device: blueangel:phonebutt > <6>[ 2.480000] Registered led device: blueangel:vibra > <6>[ 2.490000] Registered led device: blueangel:kbdbackli > <6>[ 2.510000] logger: created 64K log 'log_main' > <6>[ 2.530000] logger: created 64K log 'log_events' > <6>[ 2.550000] logger: created 64K log 'log_radio' > <6>[ 2.560000] Advanced Linux Sound Architecture Driver Version > 1.0.14rc3 (Wed Mar 14 07:25:50 2007 UTC). > <6>[ 2.600000] ASoC version 0.13.3 > <6>[ 2.610000] UDA1380 Audio Codec 0.5<6>asoc: UDA1380 <-> pxa2xx- > ssp1 mapping ok > <6>[ 2.640000] asoc: UDA1380 <-> pxa2xx-i2s mapping ok > <7>[ 2.660000] uda1380: uda hw write 2 val 100 > <7>[ 2.660000] uda1380: uda hw write 0 val 10 > <6>[ 2.680000] ALSA device list: > <6>[ 2.690000] #0: Blueangel (UDA1380) > <6>[ 2.700000] TCP cubic registered > <6>[ 2.710000] NET: Registered protocol family 1 > <6>[ 2.730000] NET: Registered protocol family 17 > <6>[ 2.740000] Bluetooth: L2CAP ver 2.8 > <6>[ 2.750000] Bluetooth: L2CAP socket layer initialized > <6>[ 2.770000] Bluetooth: SCO (Voice Link) ver 0.5 > <6>[ 2.780000] Bluetooth: SCO socket layer initialized > <6>[ 2.800000] Bluetooth: RFCOMM socket layer initialized > <6>[ 2.810000] Bluetooth: RFCOMM TTY layer initialized > <6>[ 2.830000] Bluetooth: RFCOMM ver 1.8 > <6>[ 2.840000] Bluetooth: BNEP (Ethernet Emulation) ver 1.2 > <6>[ 2.860000] Bluetooth: BNEP filters: protocol multicast > <6>[ 2.870000] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 > <6>[ 2.900000] XScale DSP coprocessor detected. > <4>[ 2.900000] pxa_gpiodev_get_value(8) > <6>[ 2.920000] sa1100-rtc sa1100-rtc: setting the system clock to > 1994-09-02 12:07:13 (778507633) > <4>[ 2.950000] asic3_mmc: ASIC3 MMC/SD Driver, controller at > 0xe000000 > <4>[ 2.950000] pxa_gpiodev_get_value(8) > <4>[ 3.320000] pxa_gpiodev_get_value(8) > <6>[ 3.560000] Waiting 10sec before mounting root device... > <6>[ 4.500000] mmcblk0: mmc0:6f58 SD02G 2011136KiB > <6>[ 4.510000] mmcblk0: p1 p2 > <6>[ 5.030000] usb0: full speed config #1: 100 mA, Ethernet Gadget, > using CDC Ethernet Subset > <4>[ 62.120000] acx: firmware image 'WLANGEN.BIN' was not provided. > Check your hotplug scripts > <4>[ 62.140000] acx: reset_dev() FAILED > <6>[ 62.160000] wlan%d: index 0x01: irq 40, mem > 0x2c000000-0x2c000fff > <4>[ 62.220000] EXT2-fs warning: mounting unchecked fs, running > e2fsck is recommended > <4>[ 62.250000] VFS: Mounted root (ext2 filesystem). > <6>[ 62.270000] Freeing init memory: 104K > > > --- main --- (the binary stuff in the logs kinda f'ed it up) > > .apk)ip_openZipFile(/system/app/Phone.apk)apk)mission > android.permission.ADD_SYSTEM_SERVICE to > android.server.PackageManagerService > [EMAIL PROTECTED]@4004f498 > android.permission.INTERNAL_SYSTEM_WINDOW to > android.server.PackageManagerService > [EMAIL PROTECTED] > [EMAIL PROTECTED] to > [EMAIL PROTECTED] > > ng provider googleaccounts: > com.google.android.providers.googleapps.GoogleAccountsProvider statup > java.io.FileNotFoundException: /sys/android_power/battery_level > at > org.apache.harmony.luni.platform.OSFileSystem.open(OSFileSystem.java: > 227) > at java.io.FileInputStream.<init>(FileInputStream.java:76) > at java.io.FileInputStream.<init>(FileInputStream.java:123) > at android.server.BatteryService.readLineFromFile(BatteryService.java: > 225) > at android.server.BatteryService.getLevel(BatteryService.java:137) > at android.server.BatteryService.updateBattery(BatteryService.java: > 111) > at android.server.BatteryService.<init>(BatteryService.java:97) > at android.server.ServerThread.run(SystemServer.java:159) > > java.io.FileNotFoundException: /sys/android_power/battery_level_scale > at > org.apache.harmony.luni.platform.OSFileSystem.open(OSFileSystem.java: > 227) > at java.io.FileInputStream.<init>(FileInputStream.java:76) > at java.io.FileInputStream.<init>(FileInputStream.java:123) > at android.server.BatteryService.readLineFromFile(BatteryService.java: > 225) > at android.server.BatteryService.getScale(BatteryService.java:145) > at android.server.BatteryService.updateBattery(BatteryService.java: > 112) > at android.server.BatteryService.<init>(BatteryService.java:97) > at android.server.ServerThread.run(SystemServer.java:159) > > java.io.FileNotFoundException: /sys/android_power/battery_level_raw > at > org.apache.harmony.luni.platform.OSFileSystem.open(OSFileSystem.java: > 227) > at java.io.FileInputStream.<init>(FileInputStream.java:76) > at java.io.FileInputStream.<init>(FileInputStream.java:123) > at android.server.BatteryService.readLineFromFile(BatteryService.java: > 225) > at android.server.BatteryService.getRaw(BatteryService.java:153) > at android.server.BatteryService.updateBattery(BatteryService.java: > 113) > at android.server.BatteryService.<init>(BatteryService.java:97) > at android.server.ServerThread.run(SystemServer.java:159) > > java.io.FileNotFoundException: /sys/android_power/charging_state > at > org.apache.harmony.luni.platform.OSFileSystem.open(OSFileSystem.java: > 227) > at java.io.FileInputStream.<init>(FileInputStream.java:76) > at java.io.FileInputStream.<init>(FileInputStream.java:123) > at android.server.BatteryService.readLineFromFile(BatteryService.java: > 225) > at android.server.BatteryService.getState(BatteryService.java:161) > at android.server.BatteryService.updateBattery(BatteryService.java: > 114) > at android.server.BatteryService.<init>(BatteryService.java:97) > at android.server.ServerThread.run(SystemServer.java:159) > 00, error 99 (Cannot assign requested address) > > > le.android.home/com.google.android.home.NewHome} } > java.lang.IllegalArgumentException: Given thread does not exist > at android.os.Process.setThreadPriority(Native Method) > at > android.server.am.ActivityManagerService.updateOomAdjLocked(ActivityManagerService.java: > 6782) > at > android.server.am.ActivityManagerService.updateOomAdjLocked(ActivityManagerService.java: > 6900) > at > android.server.am.ActivityManagerService.updateLRUListLocked(ActivityManagerService.java: > 834) > at > android.server.am.ActivityManagerService.realStartActivityLocked(ActivityManagerService.java: > 880) > at > android.server.am.ActivityManagerService.attachApplicationLocked(ActivityManagerService.java: > 2783) > at > android.server.am.ActivityManagerService.attachApplication(ActivityManagerService.java: > 2851) > at android.app.ActivityThread.attach(ActivityThread.java:2955) > at android.app.ActivityThread.main(ActivityThread.java:3050) > at java.lang.reflect.Method.invokeNative(Native Method) > at java.lang.reflect.Method.invoke(Method.java:356) > at android.os.Process.invokeStaticMain(Process.java:253) > at android.os.Process.access$000(Process.java:42) > at android.os.Process$1.run(Process.java:220) > at java.lang.Thread.run(Thread.java:896) > > java.io.FileNotFoundException: /sys/android_power/charging_state > at > org.apache.harmony.luni.platform.OSFileSystem.open(OSFileSystem.java: > 227) > at java.io.FileInputStream.<init>(FileInputStream.java:76) > at java.io.FileInputStream.<init>(FileInputStream.java:123) > at android.server.BatteryService.readLineFromFile(BatteryService.java: > 225) > at android.server.BatteryService.getState(BatteryService.java:161) > at android.server.PowerManagerService > $BatteryReceiver.onReceiveIntent(PowerManagerService.java:126) > at android.app.ActivityThread$PackageInfo > $ReceiverDispatcher.run(ActivityThread.java:482) > at android.os.Handler.handleCallback(Handler.java:455) > at android.os.Handler.dispatchMessage(Handler.java:78) > at android.os.Looper.loop(Looper.java:91) > at android.server.ServerThread.run(SystemServer.java:259) > > > ActivityThreadrvice} }: not found) returned Invalid argument service > com.google.android.providers.media.MediaScannerServiceice] > gtalkservice Startedign requested address)t, port=5900, error 99 > (Cannot assign requested address)a_jni.so 0x0 > > > > After some time i get those which obviously is a sleep-handler: > > java.io.FileNotFoundException: /proc/wakelocks > at > org.apache.harmony.luni.platform.OSFileSystem.open(OSFileSystem.java: > 227) > at java.io.FileInputStream.<init>(FileInputStream.java:76) > at java.io.FileInputStream.<init>(FileInputStream.java:123) > at java.io.FileReader.<init>(FileReader.java:69) > at android.server.PowerManagerService > $WakeLockHistory.scanKernelLocked(PowerManagerService.java:945) > at android.server.PowerManagerService > $WakeLockHistory.run(PowerManagerService.java:893) > at android.os.Handler.handleCallback(Handler.java:455) > at android.os.Handler.dispatchMessage(Handler.java:78) > at android.os.Looper.loop(Looper.java:91) > at android.server.ServerThread.run(SystemServer.java:259) > > > > > Best regards > > - Franz > > On Aug 4, 9:30�am, Josh Guilfoyle <[EMAIL PROTECTED]> wrote: > > The HTC Vogue has a quite evolved Android port at this point. �Working > > touch screen, radio, SD card, etc. �It's available at: > > > > http://it029000.massey.ac.nz/vogue/ > > > > Read the page carefully, the Updates are listed chronologically and > > show the progress that has been made since originally announced 4 > > months ago. �If you look at his kernel diff you can get a sense for > > what areas to explore to improve support on the Blue Angel hardware > > you have. �HaRET is very useful for this indeed. > > > > There does seem to be problems with certain applications on the Vogue, > > but for the most part this is quite robust environment for testing. > > Check outhttp://android-random.googlecode.com/for some simple debug/ > > testing apps written to further explore Android on real hardware. > > > > On Aug 2, 9:51 pm, fbettag <[EMAIL PROTECTED]> wrote: > > > > > Hey guys, > > > > > since the Emulator came out i've been amazed by Android and the Java > > > SDK - altho i hate Java but for that Purpose it's finally here for a > > > reason ;) > > > > > Basically i took an Angstr�m HTC Kernel and used it with the > > > Instructions from the Nokia N810 Build and copied everything onto my > > > SD Card and used HaRET to boot off. Altogether it booted past the > > > Knight Rider and booted up Android somehow. > > > > > There are still errors coming up which i am going to debug tomorrow > > > (it's 06:48 AM in Germany right now so i will go to bed quite soon). > > > > > Here's a the Screenshot (including an > > > Error):http://picpaste.de/IMG_0088.JPG > > > > > Tomorrow i'll try to make a working Android-Kernel-Config and build it > > > from hand, that's just gonna take it's time to find all the fitting > > > modules because even with Angstr�m and the autobild Kernel i get > > > errors regarding sound. > > > > > So far gn8 guys! > > > > > Anyone else done something like that? --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "Android Internals" group. To post to this group, send email to android-internals@googlegroups.com To unsubscribe from this group, send email to [EMAIL PROTECTED] For more options, visit this group at http://groups.google.com/group/android-internals?hl=en -~----------~----~----~----~------~----~------~--~---
