Hi, I am porting android to i.Mx31 hardware. I am working on the linux 2.6.22.6 kernel with android patch. For the android file system, I have extracted the ramdisk.img from the Android 1.0 SDK. I have then then extracted the system and data folders from the emulator and then created a cpio archive out of these. I am able to boot the kernel with the android file system. I am using ttymxc0 as the kernel console and the messages are displayed on the console(Hyperterminal on the PC connected to the hardware over UART). I have still not got the display working. So, I would like to see all the messages on the console. For the kernel, I have specified the init in the android file system as the initrd.
After executing the init the console messages stop after sometime. When I debugged this further, I added debug messages in do_execve to check where the messages actually stop. I found that the last do_execve being called in /system/bin/sh in init.rc. So, I would like to know if executing the /system/bin/sh actually change the console to another device which is why I am not seeing any other messages? If so what console should I be using? In the emualtor the console is set to "ttyS0". Here even after executing the /system/bin/sh the console messages continue to appear. So, I even tried modifying the console to "ttyS0" in the kernel and inspite of that the messages stop after executing /system/bin/sh. Any help in this regard would be of great help Thanks, Murali --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "Android Internals" group. To post to this group, send email to android-internals@googlegroups.com To unsubscribe from this group, send email to [EMAIL PROTECTED] For more options, visit this group at http://groups.google.com/group/android-internals?hl=en -~----------~----~----~----~------~----~------~--~---
