Hi Suresh, Thanks enormously for your help.
It's kind like a silly question. After enabling the ipv6 options, do I still use make ARCH=arm CROSS_COMPILE=../android/arm-2009q1/bin/arm-none-linux-gnueabi- bzImage to compile the kernel? Another question: let say I want to compile the kernel for the n810 phone, which defconfig should I use for make? The omap_h2_1610_defconfig? Thanks again On Thu, Sep 24, 2009 at 9:19 AM, Suresh Kumar <[email protected]>wrote: > make goldfish_defconfig (for emulator) > or > make msm_defconfig (for G1) > > then "make menuconfig" and choose the ipv6 options. > > > On Wed, Sep 23, 2009 at 10:36 PM, tom <[email protected]> wrote: > >> >> Hi, >> >> I'm a new bie with Android and especially about compiling the Android >> kernel >> in order it support IPv6. >> >> >> I've done the following steps in order to compile Android with ipv6:- >> >> 1) Download the following kernel on my Ubuntu 7.10 :- linux-2.6.25- >> android-1.0_r1.tar.gz, >> >> (I've tried it also with Ubuntu 8.10) >> >> 2) Then I've use the following cross compiler to compile the >> kernel :- make ARCH=arm CROSS_COMPILE=../android/arm-2009q1/bin/arm- >> none-linux-gnueabi- bzImage >> >> Unfortunately only these files are compiled in the kernel for ipv6:- >> CC net/ipv6/addrconf_core.o >> CC net/ipv6/exthdrs_core.o >> CC net/ipv6/inet6_hashtables.o >> >> The other modules for e.g. (net/ipv6/addrconf.c, net/ipv6/ >> ip6_input.c, net/ipv6/ip6_output.c..) are not compiled. >> >> >> Do you think that I've wrongly set the .config? even though I did >> specify to compile the ipv6 by issuing the command make menuconfig. >> >> My aim is to introduced kernel modules in the ipv6 layer in Android. >> >> Thanks you enormously for your help. >> >> >> > > > > --~--~---------~--~----~------------~-------~--~----~ unsubscribe: [email protected] website: http://groups.google.com/group/android-kernel -~----------~----~----~----~------~----~------~--~---
