Hi Anil,
This is janakiram ,i too an planning to port android on
OMAP ,but its on 2420.I required your guidance
Kindly let me know how to proceed
I am plannig to do it on Ubuntu Linux as host
but while i am trying to install the emulator i am geting error
regarding SDL.
I would also like to know from how did u proceed in porting on
anndroid if you can share me a document how you had done it will be
more helpful
regards
ram
On Nov 27, 11:19 am, "Anil Sasidharan" <[EMAIL PROTECTED]> wrote:
> Hi,
>
> We have ported android-1.0 onto OMAP3EVM (from Mistral)
> with 2.6.26 kernel. If you are interested in getting some info/support
> on this, please let us know.
>
> Warm Regards,
> Anil
> Mistral
>
> Warm Regards,
> Anil
>
>
>
> On Thu, Nov 27, 2008 at 7:34 AM, kapare <[EMAIL PROTECTED]> wrote:
>
> > Nice I'm happy to speak and exchange with MontaVista guy!
>
> > I imagine that your demo with OMAP 3 EVM and montavista src have been
> > ship for Embedded Technology 2008 in Yokohama, Japan, November 19-21 ?
>
> > I'm still wiondering why you used 2.6.24 and not minimally 2.6.25 or
> > higher, since android is 2.6.25.
>
> > I will try to go with 2.6.22.18 TI src and patch android on it!
>
> > thx for infos
>
> > kap
>
> > On Nov 26, 1:45 pm, Maxime Petazzoni <[EMAIL PROTECTED]>
> > wrote:
> >> Hi,
>
> >> On 26 nov, 18:36, kapare <[EMAIL PROTECTED]> wrote:
>
> >> > > No, I've used MontaVista Linux 2.6.24
> >> > > :http://mvista.com/press_release_detail.php?fid=news/2008/MontaVista-L...
> >> > > , on top of which I added the Android drivers (that needed a bit of
> >> > > work because of some differences between 2.6.25 and 2.6.24, especially
> >> > > in sysfs).
>
> >> > Did you get the src code from git our from support of monta vista?
>
> >> > thx for helping a guy a bit lost!
>
> >> I work at MontaVista, and the press release up there depicts our work
> >> on Android. We used our kernel as the base for the Android port, so we
> >> already have OMAP3EVM and OMAP3LDP board support. Except from small
> >> keypad mapping changes between EVM and Zoom, I only had to rebuild the
> >> kernel for the correct board to move from the EVM to Zoom. I haven't
> >> tested yet, but I suspect it will go as smoothly for the BeagleBoard
> >> as well.
>
> >> - Maxime
>
> >> > kap
>
> >> > On Nov 26, 4:57 am, Maxime Petazzoni <[EMAIL PROTECTED]>
> >> > wrote:
>
> >> > > Hi,
>
> >> > > On 26 nov, 00:28, kapare <[EMAIL PROTECTED]> wrote:
>
> >> > > > Hi Maxime,
>
> >> > > > I have a OMAP3EVM and I'm interested in porting it with android.
>
> >> > > > OMAP3EVM come with OMAP35x_SDK_0.9.5 that contain 2.6.22.18.
>
> >> > > > 1- Did you port the kernel to 2.6.25 or just used 2.6.22.18 + android
> >> > > > patch - goldfish stuff ?
>
> >> > > No, I've used MontaVista Linux 2.6.24
> >> > > :http://mvista.com/press_release_detail.php?fid=news/2008/MontaVista-L...
> >> > > , on top of which I added the Android drivers (that needed a bit of
> >> > > work because of some differences between 2.6.25 and 2.6.24, especially
> >> > > in sysfs).
>
> >> > > > 2- Did you try to directly use the OMAP zoom on a OMAP3EVM, It seem
> >> > > > to
> >> > > > work very slow and bugy!
>
> >> > > Sorry, I don't understand your question :(
>
> >> > > - Maxime- Hide quoted text -
>
> - Show quoted text -
--~--~---------~--~----~------------~-------~--~----~
unsubscribe: [EMAIL PROTECTED]
website: http://groups.google.com/group/android-porting
-~----------~----~----~----~------~----~------~--~---
