w00t! this is so great! Working WiFi! finally =P. I'll upload video as soon as i can!
On 9 joulu, 10:16, Peter McDermott <[EMAIL PROTECTED]> wrote: > Mohan, > > One question: Did you reformat your internal mmc card as an ext3 > filesystem as per the instructions? > > Solca has made a port of Android to the N810 all on his own -- > independent of what we did at NthCode. Additionally, unlike us, he's > ported it to a newer kernel (2.6.28) and enabled WiFi. He has a debug > kernel athttp://guug.org/nit/nitdroid/ that you can download and > flash to your N810. We're looking at his patches now to see how they > can improve our kernel. > > I would be very interested to hear if flashing either his standard or > debug kernel works for you. The reason is that some folks have > written to tell me that our kernel works OK on their N810s, so the > fact that it isn't working for you is a bit of a mystery. > > Good luck, and please report your results back to all of us! > > Regards, > > Peter > > On Dec 9, 2008, at 5:51 AM, Mohan Parthasarathy wrote: > > > Sure, I am using the kernel from nthcode. Is that a debug kernel ? I > > don't see /var/log/messages. How do i get the debug messages ? > > > thanks > > mohan > > > On Mon, Dec 8, 2008 at 11:35 AM, solca <[EMAIL PROTECTED]> wrote: > > > You are a candidate to run the debugging kernel and see what > > is going on, please report back. > > > On 8 dic, 12:20, "Mohan Parthasarathy" <[EMAIL PROTECTED]> wrote: > > > I tried your suggestions. But did not help. It got stuck at the > > "Nokia" > > > Screen. Did you see any error messages logged ? > > > > -thanks > > > mohan > > > > On Sat, Dec 6, 2008 at 2:21 AM, Meizirkki <[EMAIL PROTECTED]> > > wrote: > > > > > Mohan, i had same issue with Nth:s android. > > > > > - Remove external card, if inserted. > > > > - Make sure you used "tar -zxvf" to untar the userspace, not "tar > > > > zxvf" i used when i failed. > > > > > On 3 joulu, 21:37, "Mohan Parthasarathy" <[EMAIL PROTECTED]> > > wrote: > > > > > I did give it a shot but did not work. > > > > > > I extracted the user space on my internal sd card and that's > > what > > > > > corresponds to /dev/mmcbkl0p1. > > > > > > I flashed the new kernel but it did not boot. After a minute > > or so, it > > > > reset > > > > > itself. > > > > > Let me know if i am missing something.. > > > > > > -mohan > > > > > > On 12/3/08, Mohan Parthasarathy <[EMAIL PROTECTED]> wrote: > > > > > > > Cool. I still have the older version of Android running on > > my N810. > > > > That > > > > > > was using the 2.6.21 kernel. I am wondering whether using > > the 2.6.21 > > > > kernel > > > > > > and using Android changes would have made it a little > > simpler. Last > > > > time, > > > > > > not all the Android Kernel changes were taken in. Anyway, > > your way > > > > sounds > > > > > > better as you are using the latest version of Android Kernel. > > > > > > > Does the audio subsystem work. Can you play videos > > > > > > > Thanks for the great write up. You have not mentioned any > > user space > > > > > > changes in your note. I was trying to download it from > > sourceforge but > > > > it > > > > > > gave me some error. I was able to download the kernel image > > but not the > > > > txt > > > > > > files. > > > > > > > Thanks > > > > > > mohan > > > > > > > P.S I am having problems typing question mark and i need to > > reboot > > > > firefox > > > > > > i guess.. > > > > > > > On 12/2/08, Peter McDermott <[EMAIL PROTECTED]> wrote: > > > > > > >> Hi, all, > > > > > > >> We ported the Android open-source release to the Nokia > > N810. This > > > > > >> involved patching the 2.6.25 Linux kernel with the N810 > > drivers and > > > > > >> hacking the userspace just a bit. The system can boot, > > WiFi doesn't > > > > > >> work (so no Internet access), and you have to pull the > > battery to > > > > > >> power it off. But, hey, it's a start! > > > > > > >> You can downoad the kernel patch, a kernel image, a > > userspace image, > > > > > >> and a list of userspace changes at the following link: > > > > > > >>http://sourceforge.net/project/showfiles.php?group_id=246840 > > > > > > >> For people making other ports, I wrote up a technical > > backgrounder > > > > > >> with details at: > > > > > > >>http://nthcode.com/pubs/porting-android-to-a-new-device.html > > > > > > >> If a someone would like to try out our patches and images > > and let me > > > > > >> know what works, and what might not be clear or correct in > > the > > > > > >> instructions, I'd be thrilled. > > > > > > >> Regards, > > > > > > >> Peter > > > > > > >> P.S. Much thanks to the folks who made the pre-release > > Android work on > > > > > >> the N810 (Penguinbait, B-man, and QWERTY12). Their work > > saved us a > > > > > >> lot of time. --~--~---------~--~----~------------~-------~--~----~ unsubscribe: [EMAIL PROTECTED] website: http://groups.google.com/group/android-porting -~----------~----~----~----~------~----~------~--~---
