Hi everyone,
I built again the Android source code using "make ARCH=arm
CROSS_COMPILE=arm-crosstool-linux-gnueabi-" and 2 hours later it was
completed.
Then i used the directory : mydroid/out/target/product/generic/root as
filesystem for the board (still using NFS)
Then when i boot the board :
<6>init: event { 'add', '/class/i2c-dev/i2c-1', 'i2c-dev', '', 89,
1 }
init: event { 'add', '/class/i2c-dev/i2c-1', 'i2c-dev', '', 89,
1 }
<6>init: event { 'add', '/block/ram0', 'block', '', 1,
0 }
init: event { 'add', '/block/ram0', 'block', '', 1,
0 }
<6>init: event { 'add', '/devices/platform/physmap-flash.0',
'platform', '', -1, -1 }
init: event { 'add', '/devices/platform/physmap-flash.0', 'platform',
'', -1, -1 }
<6>init: event { 'add', '/devices/platform/davinci_nand.0',
'platform', '', -1, -1 }
init: event { 'add', '/devices/platform/davinci_nand.0', 'platform',
'', -1, -1 }
<6>init: event { 'add', '/devices/platform/davincifb', 'platform', '',
-1, -1 }
init: event { 'add', '/devices/platform/davincifb', 'platform', '',
-1, -1 }
<6>init: event { 'add', '/devices/platform/musb_hdrc', 'platform', '',
-1, -1 }
init: event { 'add', '/devices/platform/musb_hdrc', 'platform', '',
-1, -1 }
<6>init: event { 'add', '/devices/platform/rtc_davinci_evm',
'platform', '', -1, -1 }
init: event { 'add', '/devices/platform/rtc_davinci_evm', 'platform',
'', -1, -1 }
<6>init: event { 'add', '/devices/platform/palm_bk3710', 'platform',
'', -1, -1 }
init: event { 'add', '/devices/platform/palm_bk3710', 'platform', '',
-1, -1 }
<6>init: event { 'add', '/devices/platform/serial8250.0', 'platform',
'', -1, -1 }
init: event { 'add', '/devices/platform/serial8250.0', 'platform', '',
-1, -1 }
<6>init: event { 'add', '/devices/platform/i2c_davinci.1', 'platform',
'', -1, -1 }
init: event { 'add', '/devices/platform/i2c_davinci.1', 'platform',
'', -1, -1 }
<6>init: event { 'add', '/devices/platform/davinci_mmc.1', 'platform',
'', -1, -1 }
init: event { 'add', '/devices/platform/davinci_mmc.1', 'platform',
'', -1, -1 }
<6>init: event { 'add', '/devices/platform/serial8250', 'platform',
'', -1, -1 }
init: event { 'add', '/devices/platform/serial8250', 'platform', '',
-1, -1 }
<6>init: event { 'add', '/devices/platform/ti_davinci_emac',
'platform', '', -1, -1 }
init: event { 'add', '/devices/platform/ti_davinci_emac', 'platform',
'', -1, -1 }
<6>init: coldboot 8113489
uS
init: coldboot 8113489
uS
But I cannot see any Android displayed on the screen or any red eye.
Anyone encountered that problem? Maybe some files are missing?
Thanks a lot.
--~--~---------~--~----~------------~-------~--~----~
unsubscribe: [email protected]
website: http://groups.google.com/group/android-porting
-~----------~----~----~----~------~----~------~--~---
