Hi all,
So I got this S3C2440 which has the following features -
Samsung S3C2440, 400 MHz,
64 M SDRAM
64M Nand Flash
2M NOR flash, BIOS installed.
LCD -4 wire touch screen interface.
This thing came with linux 2.6.13 preinstalled and even has a Qtopia
window manager on LCD.
Now my question: In order to see Android environment after system
boots up, Can I just go ahead and replace the root filesystem with
Android root fs and keeping the kernel same. Or Android runtime
depends on a specific kernel version. I realize these may be quite
well known questions already, and in this case thanks for putting up
with my ignorance :-).
BTW, the following is the output of various commands from serial
console:
[r...@friendlyarm /]# cat /proc/cpuinfo
Processor : ARM920Tid(wb) rev 0 (v4l)
BogoMIPS : 202.34
Features : swp half thumb
CPU implementer : 0x41
CPU architecture: 4T
CPU variant : 0x1
CPU part : 0x920
CPU revision : 0
Cache type : write-back
Cache clean : cp15 c7 ops
Cache lockdown : format A
Cache format : Harvard
I size : 16384
I assoc : 64
I line length : 32
I sets : 8
D size : 16384
D assoc : 64
D line length : 32
D sets : 8
Hardware : QQ2440
Revision : 0000
Serial : 0000000000000000
[r...@friendlyarm /]# df
Filesystem 1k-blocks Used Available Use% Mounted on
/dev/root 63152 56664 6488 90% /
none 30652 0 30652 0% /tmp
none 30652 4 30648 0% /var
[r...@friendlyarm /]#
[r...@friendlyarm /]# free
total used free shared
buffers
Mem: 61304 20212 41092 0
0
Swap: 0 0 0
Total: 61304 20212 41092
[r...@friendlyarm /]#
[r...@friendlyarm /]# uname -a
Linux FriendlyARM 2.6.13 #1 Tue Nov 4 16:03:40 CST 2008 armv4tl
unknown
[r...@friendlyarm /]#
thanks.
George
--~--~---------~--~----~------------~-------~--~----~
unsubscribe: [email protected]
website: http://groups.google.com/group/android-porting
-~----------~----~----~----~------~----~------~--~---
