Abhishek, I suggest you discuss this on beagleboard mailing list: [email protected] Regards, Nishanth Menon Abhishek Srivastav said the following on 02/24/2009 10:10 AM: > Hi Nimit, > > I am using the filesystem mounted on SD card. This filesystem being > used is a fresh one ie it was never mounted on using NFS. > I got this filesystem from the beagle website ie > http://www.embinux.com/download_beagle.php. > > If possible can you please send me the final image on the LCD screen > once the android boots up. > > Please help me in solving this issue. > > Thanks and Regards, > Abhishek Srivastav > > On Feb 24, 12:17 pm, Nimit Manglick <[email protected]> wrote: > >> How you are mounting the RFS ? via SD card or NFS ? >> >> Are you using the already used filesystem via NFS means if you try to use >> >> teh RFs which you have already mounted via NFS then you have to delete soem >> fiels from it >> >> before using the same RFs via SD card. >> >> On Tue, Feb 24, 2009 at 12:36 PM, Abhishek Srivastav < >> >> [email protected]> wrote: >> >> >>> Hi Vishal, >>> >>> Thanks a lot for your reply.... >>> Now I am able to boot the android. >>> It was a Kernel configuration problem (Message queue support was not >>> enabled ). >>> >>> But still I am not able to reach the android menuscreen(Currently the >>> screen displays the android images with android logo). >>> >>> On analyzing this logcat command, I have found that it is continuously >>> trying to load the audio libraries. >>> >>> Please help me in disabling this. >>> >>> The tail log of logcat and strace commands are pasted below. >>> >>> strace: >>> ======= >>> timer_delete(0x1) = 0 >>> futex(0x4000b220, FUTEX_WAKE, 2147483647) = 0 >>> futex(0x40009004, FUTEX_WAKE, 2147483647) = 0 >>> futex(0x4000b0a0, FUTEX_WAKE, 2147483647) = 0 >>> futex(0x40009004, FUTEX_WAKE, 2147483647) = 0 >>> wait4(-1, 0xbef27ac0, WNOHANG, NULL) = 0 >>> timer_delete(0x1) = 0 >>> timer_delete(0x1) = 0 >>> timer_delete(0x1) = 0 >>> timer_delete(0x1) = 0 >>> poll([{fd=4, events=POLLIN}, {fd=6, events=POLLIN}, {fd=8, >>> events=POLLIN}], 3, 5 >>> 000) = ? ERESTART_RESTARTBLOCK (To be restarted) >>> --- SIGCHLD (Child exited) @ 0 (0) --- >>> write(7, "\21", 1) = 1 >>> sigreturn() = ? (mask now []) >>> timer_delete(0x1) = 0 >>> timer_delete(0x1) = 0 >>> timer_delete(0x1) = 0 >>> timer_delete(0x1) = 0 >>> poll([{fd=4, events=POLLIN}, {fd=6, events=POLLIN}, {fd=8, >>> events=POLLIN, revent >>> s=POLLIN}], 3, 5000) = 1 >>> read(8, "\21", 92) = 1 >>> wait4(-1, [{WIFSIGNALED(s) && WTERMSIG(s) == SIGTERM}], WNOHANG, NULL) >>> = 721 >>> --- SIGILL (Illegal instruction) @ 0 (0) --- >>> +++ killed by SIGILL +++ >>> # <3>init: untracked pid 726 exited >>> init: untracked pid 726 exited >>> >>> logcat >>> ====== >>> >>>> export DRM_CONTENT=/data/drm/content >>>> >>> 00000000 >>> I/DEBUG ( 481): bed75ad0 00000000 >>> I/DEBUG ( 481): bed75ad4 bed75ae0 [stack] >>> I/DEBUG ( 481): bed75ad8 ab716388 /system/lib/libaudio.so >>> I/DEBUG ( 481): bed75adc ab715f34 /system/lib/libaudio.so >>> I/ServiceManager( 499): Waiting for sevice media.audio_flinger... >>> W/AudioSystem( 499): AudioFlinger not published, waiting... >>> I/ServiceManager( 499): Waiting for sevice media.audio_flinger... >>> I/ServiceManager( 499): Waiting for sevice media.audio_flinger... >>> Õ >>> >>> Thanks and Regards, >>> Abhishek Srivastav >>> >>> On Feb 22, 2:41 pm, vishal bhoj <[email protected]> wrote: >>> >>>> have u checked with the permissions o f the filesystem ? R u booting over >>>> nfs or sdcard? >>>> >>>> On Sun, Feb 22, 2009 at 2:43 PM, Abhishek Srivastav < >>>> >>>> [email protected]> wrote: >>>> >>>>> Hello Everyone, >>>>> >>>>> I am trying to boot android in our Custom board. This board is very >>>>> similar to that of OMAP3EVM from Mistral. >>>>> >>>>> But when I attempt to boot I am getting a Kernel panic while executing >>>>> init ie init=/init. I am able to boot the Kernel when I change init >>>>> the bootargs ie init=/system/bin/sh, but after this when I attempt to >>>>> run init, I am getting a segmentation fault. On analyzing this through >>>>> strace command I have observed that it is not able to open the node / >>>>> dev/ashmem but the same has been enabled in the Kernel configuration. >>>>> >>>>> # strace init >>>>> execve("/init", ["init"], [/* 4 vars */]) = 0 >>>>> gettid() = 287 >>>>> syscall_983045(0xbeaead84, 0, 0x40, 0, 0xbeacb000, 0xbeaeaec0, >>>>> 0xbeaeae84, 0xf00 >>>>> 05, 0, 0, 0, 0, 0, 0xbeaead68, 0x12e07, 0x1926c, 0x60000010, >>>>> 0xbeaead84, 0xb9f1, >>>>> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0) = 0 >>>>> open("/dev/urandom", O_RDONLY|O_LARGEFILE) = -1 ENOENT (No such file >>>>> or director >>>>> y) >>>>> sigaction(SIGCHLD, {0x88c1, [], SA_NOCLDSTOP}, NULL, 0) = 0 >>>>> umask(0) = 022 >>>>> mkdir("/dev", 0755) = -1 EEXIST (File exists) >>>>> mkdir("/proc", 0755) = -1 EEXIST (File exists) >>>>> mkdir("/sys", 0755) = -1 EEXIST (File exists) >>>>> mount("tmpfs", "/dev", "tmpfs", 0, 0x1c034) = 0 >>>>> mkdir("/dev/pts", 0755) = 0 >>>>> mkdir("/dev/socket", 0755) = 0 >>>>> mount("devpts", "/dev/pts", "devpts", 0, 0) = 0 >>>>> mount("proc", "/proc", "proc", 0, 0) = -1 EBUSY (Device or resource >>>>> busy) >>>>> mount("sysfs", "/sys", "sysfs", 0, 0) = -1 EBUSY (Device or resource >>>>> busy) >>>>> mknod("/dev/__null__", S_IFCHR|0600, makedev(1, 3)) = 0 >>>>> open("/dev/__null__", O_RDWR|O_LARGEFILE) = 3 >>>>> unlink("/dev/__null__") = 0 >>>>> dup2(3, 0) = 0 >>>>> dup2(3, 1) = 1 >>>>> dup2(3, 2) = 2 >>>>> close(3) = 0 >>>>> mknod("/dev/__kmsg__", S_IFCHR|0600, makedev(1, 11)) = 0 >>>>> open("/dev/__kmsg__", O_WRONLY|O_LARGEFILE) = 3 >>>>> fcntl64(3, F_SETFD, FD_CLOEXEC) = 0 >>>>> unlink("/dev/__kmsg__") = 0 >>>>> open("/init.rc", O_RDONLY|O_LARGEFILE) = 4 >>>>> lseek(4, 0, SEEK_END) = 8687 >>>>> lseek(4, 0, SEEK_SET) = 0 >>>>> brk(0) = 0x23000 >>>>> brk(0x23000) = 0x23000 >>>>> brk(0x26000) = 0x26000 >>>>> read(4, "\non init\n\nsysclktz 0\n\nloglevel 3"..., 8687) = 8687 >>>>> close(4) = 0 >>>>> mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, >>>>> 0) = 0x40 >>>>> 000000 >>>>> mprotect(0x40000000, 4096, PROT_READ) = 0 >>>>> fstat64(1, {st_mode=S_IFCHR|0600, st_rdev=makedev(1, 3), ...}) = 0 >>>>> brk(0x27000) = 0x27000 >>>>> mprotect(0x40000000, 4096, PROT_READ|PROT_WRITE) = 0 >>>>> mprotect(0x40000000, 4096, PROT_READ) = 0 >>>>> ioctl(1, SNDCTL_TMR_TIMEBASE or TCGETS, 0xbeaea840) = -1 ENOTTY (Not a >>>>> typewrite >>>>> r) >>>>> brk(0x28000) = 0x28000 >>>>> open("/proc/cmdline", O_RDONLY|O_LARGEFILE) = 4 >>>>> read(4, "console=ttyS0,115200n8 noinitrd "..., 1023) = 112 >>>>> close(4) = 0 >>>>> chmod("/proc/cmdline", 0440) = 0 >>>>> open("/proc/cpuinfo", O_RDONLY|O_LARGEFILE) = 4 >>>>> read(4, "Processor\t: ARMv7 Processor rev "..., 1023) = 744 >>>>> close(4) = 0 >>>>> open("/init.omap3.rc", O_RDONLY|O_LARGEFILE) = -1 ENOENT (No such file >>>>> or direct >>>>> ory) >>>>> getpid() = 287 >>>>> mq_notify(0x10, 0x2) = -1 ENOSYS (Function not >>>>> implemented) >>>>> open("/dev/ashmem", O_RDWR|O_LARGEFILE) = -1 ENOENT (No such file or >>>>> directory) >>>>> open("/default.prop", O_RDONLY|O_LARGEFILE) = 4 >>>>> lseek(4, 0, SEEK_END) = 93 >>>>> lseek(4, 0, SEEK_SET) = 0 >>>>> read(4, "#\n# ADDITIONAL_DEFAULT_PROPERTIE"..., 93) = 93 >>>>> close(4) = 0 >>>>> --- SIGSEGV (Segmentation fault) @ 0 (20) --- >>>>> +++ killed by SIGSEGV +++ >>>>> # ls >>>>> >>>>> Please help me regarding this >>>>> >>>>> Thanks in advance!!! >>>>> >>>>> Regards, >>>>> Abhishek Srivastav >>>>> >>>> -- >>>> with regards vishal >>>> >> > > > >
--~--~---------~--~----~------------~-------~--~----~ unsubscribe: [email protected] website: http://groups.google.com/group/android-porting -~----------~----~----~----~------~----~------~--~---
