http://groups.google.com/group/android-porting/browse_thread/thread/dbeba5caa4ed709/e24141ec7fff5798?lnk=gst&q=4pda#e24141ec7fff5798
On 18 мар, 14:36, Rajesh N <[email protected]> wrote: > HI Guys, > > Yes, I have no problem in porting android on real target, did u apply a > patch for touch screen which is needed? > > if not , kindly do changes to these two files, u r touchscreen problem will > be solved. > > ==================================================================== > ,diff -ur linux-2.6.22/drivers/input/touchscreen/mxc_ts.c > linux-2.6.22/drivers/input/touchscreen/mxc_ts.c > --- linux-2.6.22/drivers/input/touchscreen/mxc_ts.c 2008-06-02 > 20:40:12.000000000 +0900 > +++ linux-2.6.22.android/drivers/input/touchscreen/mxc_ts.c 2008-06-17 > 18:49:28.000000000 +0900 > @@ -38,6 +38,15 @@ > > #define MXC_TS_NAME "mxc_ts" > > +#define X_AXIS_MAX 1000 > +#define X_AXIS_MIN 80 > +#define Y_AXIS_MAX 1000 > +#define Y_AXIS_MIN 80 > +#define PRESSURE_MAX 1 > +#define PRESSURE_MIN 0 > > static struct input_dev *mxc_inputdev = NULL; > static u32 input_ts_installed; > > @@ -50,15 +59,39 @@ > try_to_freeze(); > memset(&ts_sample, 0, sizeof(t_touch_screen)); > pmic_adc_get_touch_sample(&ts_sample, !wait); > - > +#if 1 > + if((ts_sample.x_position >= X_AXIS_MIN) && > + (ts_sample.x_position <= X_AXIS_MAX) && > + (ts_sample.y_position >= Y_AXIS_MIN) && > + (ts_sample.y_position <= Y_AXIS_MAX)) { > + > + input_report_abs(mxc_inputdev, ABS_X, > ts_sample.x_position); > + input_report_abs(mxc_inputdev, ABS_Y, > ts_sample.y_position); > + input_report_abs(mxc_inputdev, ABS_PRESSURE, > + ts_sample.contact_resistance); > + > + input_report_key(mxc_inputdev,BTN_TOUCH,1); > + } > + else { > + input_report_key(mxc_inputdev,BTN_TOUCH,0); > + } > + input_sync(mxc_inputdev); > + > + wait = ts_sample.contact_resistance; > + msleep(20); > +#else > input_report_abs(mxc_inputdev, ABS_X, ts_sample.x_position); > > input_report_abs(mxc_inputdev, ABS_Y, ts_sample.y_position); > > input_report_abs(mxc_inputdev, ABS_PRESSURE, > ts_sample.contact_resistance); > + > input_sync(mxc_inputdev); > > wait = ts_sample.contact_resistance; > msleep(20); > +#endif > } > > return 0; > @@ -77,6 +110,12 @@ > mxc_inputdev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); > mxc_inputdev->keybit[LONG(BTN_TOUCH)] |= BIT(BTN_TOUCH); > mxc_inputdev->absbit[0] = BIT(ABS_X) | BIT(ABS_Y) | > BIT(ABS_PRESSURE); > + input_set_abs_params(mxc_inputdev,ABS_X,X_AXIS_MIN,X_AXIS_MAX,0,0); > + input_set_abs_params(mxc_inputdev,ABS_Y,Y_AXIS_MIN,Y_AXIS_MAX,0,0); > + > input_set_abs_params(mxc_inputdev,ABS_PRESSURE,PRESSURE_MIN,PRESSURE_MAX,0,0); > > input_register_device(mxc_inputdev); > > input_ts_installed = 1; > > ======================================================================= > BTW I found ipu had some problem.following image is fix image. > > diff -ur linux-2.6.22/drivers/mxc/ipu/ipu_common.c > linux-2.6.22/drivers/mxc/ipu/ipu_common.c > --- linux-2.6.22/drivers/mxc/ipu/ipu_common.c 2008-06-02 > 20:40:13.000000000 +0900 > +++ linux-2.6.22.android/drivers/mxc/ipu/ipu_common.c 2008-06-17 > 18:49:40.000000000 +0900 > @@ -588,23 +587,28 @@ > > if (dma_chan == IDMA_CHAN_INVALID) > return -EINVAL; > - > spin_lock_irqsave(&ipu_lock, lock_flags); > if (bufNum == 0) { > reg = __raw_readl(IPU_CHA_BUF0_RDY); > +#if 0 > if (reg & (1UL << dma_chan)) { > spin_unlock_irqrestore(&ipu_lock, lock_flags); > return -EACCES; > } > +#endif > __raw_writel(DMAParamAddr(dma_chan) + 0x0008UL, > IPU_IMA_ADDR); > __raw_writel(phyaddr, IPU_IMA_DATA); > } else { > reg = __raw_readl(IPU_CHA_BUF1_RDY); > +#if 0 > if (reg & (1UL << dma_chan)) { > spin_unlock_irqrestore(&ipu_lock, lock_flags); > return -EACCES; > } > +#endif > __raw_writel(DMAParamAddr(dma_chan) + 0x0009UL, > IPU_IMA_ADDR); > __raw_writel(phyaddr, IPU_IMA_DATA); > } > @@ -1139,7 +1143,15 @@ > if (wait_for_stop && channel != MEM_SDC_FG && channel != MEM_SDC_BG) > { > timeout = 40; > while ((__raw_readl(IDMAC_CHA_BUSY) & chan_mask) || > +#if 0 > (_ipu_channel_status(channel) == TASK_STAT_ACTIVE)) { > > +#else > + (_ipu_channel_status(channel) == TASK_STAT_ACTIVE) || > > + __raw_readl(IPU_CHA_BUF0_RDY) & (1UL << out_dma) || > + __raw_readl(IPU_CHA_BUF0_RDY) & (1UL << out_dma)) > + { > +#endif > timeout--; > msleep(10); > > Thanks & Regards, > Rajesh N > > On Wed, Mar 18, 2009 at 4:38 PM, Consy - Leong Wen Xin < > > > > [email protected]> wrote: > > Hi Rajesh, > > > Thanks for the quick reply. > > I checked on the Debug output: > > > Pressed on 398,673 : > > /dev/input/event1: 0003 0000 0000018e > > /dev/input/event1: 0003 0001 000002a1 > > /dev/input/event1: 0000 0000 00000000 > > /dev/input/event1: 0001 014a 00000000 > > /dev/input/event1: 0000 0000 00000000 > > > Well input is accepted, but no respond from the GUI. Apart from the MENU > > ICON faded, which causes me unable to enter/exit the menu with "Enter > > button" on IMX board. > > Reason the MENU ICON fade is cause by: > > > input_report_key(mxc_inputdev,BTN_TOUCH,X) > > > If I excluded that on compile. Although MENU ICON doesn't fade on screen > > touch, still GUI not respond on touched point. > > Did you get the touch screen working completely? Can you please give me > > more information? > > > Thank you. > > > Best Regards, > > Justin > > > On Wed, Mar 18, 2009 at 10:12 AM, Rajesh N <[email protected]>wrote: > > >> Hi Justin, > > >> just check the touchscreen events with "getevent" command, this will show > >> cross ponding values for touchscreen events and key pressed events. > > >> Yes, X and Y coordinates are inverted in i.MX31 board, solve that problem > >> by subtracting 1000 from X coordinate values obtained , this will solve u r > >> problem. > > >> Thanks, > >> Rajesh N > > >> On Wed, Mar 18, 2009 at 3:35 PM, Justin <[email protected]> wrote: > > >>> Hail to all experts, > > >>> I'm trying to get the touch screen working on IMX31 3 stack boards. At > >>> "kernel/drivers/input/touchscreen/mxc_ts.c" placed printf to test the > >>> touchscreen respond/coordinate input. > > >>> Well I notice the output x-coor is inverted, everything else looks > >>> fine. > >>> Kernel is reading the input, but not the Android OS. > > >>> I tried the suggestion of: > > >>>http://groups.google.com/group/android-porting/browse_thread/thread/c... > > >>> I sees logcat: "D/InputManagerService( 1655): hide the small icon for > >>> the input method" on the 1st time I touched the screen. After that > >>> there isnt any event nor logcat output on the screen touch. > > >>> Can anyone please give me some clue? > > >>> Thank you. > > >>> Best Regards, > >>> Justin > > >> -- > >> Best Regards, > >> Rajesh N > > -- > Best Regards, > Rajesh N --~--~---------~--~----~------------~-------~--~----~ unsubscribe: [email protected] website: http://groups.google.com/group/android-porting -~----------~----~----~----~------~----~------~--~---
