Thanks carsten.bode for your reply, I changed the address, and the booting kernel image is ok:
my command: tftp c0004000 zImage_ss nand erase 40000 200000 nand write c0004000 40000 200000 and now I am doing with root file system, I got 4 folter /system, /data, /etc, /sbin and init from emulator using busbox and created some empty folder: cache,d,dev,proc, root,sdcard,sys,tmp,var. Then I make a cramfs file from them. but It can not init. VFS: Mounted root (cramfs filesystem) readonly. Freeing init memory: 508K Warning: unable to open an initial console. Failed to execute /init. Attempting defaults... Kernel panic - not syncing: No init found. Try passing init= option to kernel. Can you tell me which folder can I get from emulator to make root file system (cramfs file). Thanks you very much. On Fri, Mar 27, 2009 at 11:31 AM, [email protected] < [email protected]> wrote: > > Hello, > the sreenshot shows that you boot to address 0xc0000000. > I use a SMDK6410 board booted your kernel to address 0xc0008000, that > boots up to the android init process. > > I had a quick lock to the kernel at git:// > www.kandroid.org/samsung-s3c6410-android.1.0. > It is a 2.24 kernel with the android driver added. > > Somewhere I have seen a list of changes needed in the kernel need for > the complete android system. > Does your version contain all of the changes ? > > I´m not sure which is the best way run android on the s3c6410. > Should one: > A) Add the android drivers to the 2.24 Samsung kernel ( as in this > source ) ? > B) Add the samsung drivers from the samsung s3c6410 kernel to the > android kernel. Location of some include file are changed and some > function are different ( set_ktype_name .... ) > C) Add the samsung drivers from the 2.29 kernel to the android kernel. > D) Add the android drivers to the 2.29 kernel ? > > Can anybody tell something about the potential problems with the > different options ? > > Best regards > Carsten > > On 27 Mrz., 07:16, huymq85 <[email protected]> wrote: > > hi all, > > I have created a kernel image for Samsung s3c6410 using git : > > > > git clone git://www.kandroid.org/samsung-s3c6410-android.1.0 > > > > toolchain : > http://www.kandroid.org/~open/devtools/kandroid-1.1.2.1-20080530.glib... > > > > But when booting, i have a problem, this is the captrue: > > > > http://www.freeimagehosting.net/image.php?8a26c8fe25.jpg > > > > please tell me why? thanks you very much. > > > --~--~---------~--~----~------------~-------~--~----~ unsubscribe: [email protected] website: http://groups.google.com/group/android-porting -~----------~----~----~----~------~----~------~--~---
