Can you check your high speed uart device appeared in /dev? Did you use 2.6.27 kernel?
Also, please check there is one file named brf6300.bin in /etc/firmware. It's better to provide logcat or bugreport. 2009/4/14 Yogi <[email protected]> > > Thanks for your quick response. > I am still facing the same issue, the modified content of the > init.trout.rc is as follows: > > on early-init > device m...@misc 0460 radio diag > > on boot > # unmap left alt to avoid console switch > setkey 0x0 0x38 0x0 > # dream reset SEND+MENU+END > setkey 0x0 0xe7 0x706 > setkey 0x0 0x8b 0x707 > > setkey 0x40 0xe7 0x706 > setkey 0x40 0x8b 0x707 > > setkey 0x80 0xe7 0x706 > setkey 0x80 0x8b 0x707 > > setkey 0xc0 0xe7 0x706 > setkey 0xc0 0x8b 0x707 > setkey 0xc0 0x6b 0x20c > > mkdir /data/misc/wifi 0770 wifi wifi > mkdir /data/misc/wifi/sockets 0770 wifi wifi > mkdir /data/misc/dhcp 0770 dhcp dhcp > chown dhcp dhcp /data/misc/dhcp > > #TODO: remove these two once we switch kernel to rfkill interface > chown bluetooth bluetooth /sys/module/board_trout/parameters/ > bluetooth_power_on > chmod 0660 /sys/module/board_trout/parameters/bluetooth_power_on > > #bluetooth power up/down interface > chown bluetooth bluetooth /sys/class/rfkill/rfkill0/type > chown bluetooth bluetooth /sys/class/rfkill/rfkill0/state > chmod 0660 /sys/class/rfkill/rfkill0/state > > on property:init.svc.wpa_supplicant=stopped > stop dhcpcd > > # compass/accelerometer daemon > service akmd /system/bin/akmd > user compass > group compass misc input > > service wlan_loader /system/bin/wlan_loader \ > -f /system/etc/wifi/Fw1251r1c.bin -e /proc/calibration \ > -i /system/etc/wifi/tiwlan.ini > disabled > oneshot > > service wpa_supplicant /system/bin/wpa_supplicant \ > -Dtiwlan0 -itiwlan0 -c/data/misc/wifi/wpa_supplicant.conf > user wifi > group wifi inet > socket wpa_tiwlan0 dgram 660 wifi wifi > disabled > oneshot > > # for the moment, while debugging dhcpcd, logwrapper is > # used to get its output to appear in the logs. This will > # be removed before shipping. > service dhcpcd /system/bin/logwrapper dhcpcd -d tiwlan0 > disabled > oneshot > > service hciattach /system/bin/hciattach \ > -n -s 115200 /dev/ttyHS0 texas 4000000 flow > user bluetooth > group bluetooth net_bt_admin > disabled > > I am using HTC dream G1 device.Please help me. > > Thanks & Regards, > Yogi > > > On Apr 13, 10:16 pm, Nick Pelly <[email protected]> wrote: > > Oh, actually you need this part as well: > > > > on boot > > [...other on boot entries...] > > > > # bluetooth power up/down interface > > chown bluetooth bluetooth /sys/class/rfkill/rfkill0/type > > chown bluetooth bluetooth /sys/class/rfkill/rfkill0/state > > chmod 0660 /sys/class/rfkill/rfkill0/state > > > > On Mon, Apr 13, 2009 at 10:15 AM, Nick Pelly <[email protected]> wrote: > > > Your init.trout.rc is wrong. This is all you need in it for Bluetooth: > > > > > service hciattach /system/bin/hciattach \ > > > -n -s 115200 /dev/ttyHS0 texas 4000000 flow > > > user bluetooth > > > group bluetooth net_bt_admin > > > disabled > > > > > Note its ttyHS0 on cupcake, not MSM0. This is because we changed to the > > > High Speed uart driver. > > > > > Hope this helps. > > > > > Nick > > > > > On Mon, Apr 13, 2009 at 9:56 AM, Yogi <[email protected] > >wrote: > > > > >> Hi All, > > > > >> When I am trying to turn on Bluetooth on my HTC dream G1 device, its > > >> continuously in "turning on..." state. > > >> I have done the following steps: > > >> 1. Add BOARD_HAVE_BLUETOOTH := true in BoardConfig.mk. > > >> 2. Modified vendor/htc/dream/init.trout.rc file as follows: > > > > >> ####################################### > > >> chmod 0660 /dev/ttyS1 > > >> chown bluetooth bluetooth /dev/ttyS1 > > > > >> service dbus /system/bin/dbus-daemon --system --nofork > > >> socket dbus stream 660 bluetooth bluetooth > > >> user bluetooth > > >> group bluetooth net_bt_admin > > > > >> service hcid /system/bin/hcid -s -n -f /etc/bluez/hcid.conf > > >> socket bluetooth stream 660 bluetooth bluetooth > > >> socket dbus_bluetooth stream 660 bluetooth bluetooth > > >> group bluetooth net_bt_admin misc > > >> disabled > > >> oneshot > > > > >> service hciattach /system/bin/hciattach \ > > >> -n -s 115200 /dev/ttyMSM0 texas 115200 flow > > >> user bluetooth > > >> group bluetooth net_bt_admin misc > > >> disabled > > >> oneshot > > > > >> service hfag /system/bin/sdptool add --channel=10 HFAG > > >> user bluetooth > > >> group bluetooth net_bt_admin > > >> disabled > > >> oneshot > > >> ##################################### > > > > >> Please help me if I need to do something else.. > > > > >> Thanks in advance, > > >> Yogi > > > > > > > --~--~---------~--~----~------------~-------~--~----~ unsubscribe: [email protected] website: http://groups.google.com/group/android-porting -~----------~----~----~----~------~----~------~--~---
