Gani Bhagavathula wrote:
> Luca:
>
> I thought I posted this yesterday, but looks like I sent it as a
> Author only reply. I thought I would put this here for everyone's
> benefit.
>
> In the changes we both initially did in the wifi.c, the path to the
> module needs to be /lib/modules/ath5k.ko and not /system/lib/modules/
> ath5k.ko. If you change that, the Module gets loaded properly. Not
> that the WLAN works, but you dont go into the Airplane Mode.
>
> The next thing I did was to comment out the line set_prop
> ("ctrl.status", WLAN_LOADER); since the logs showed that it was trying
> to load the firmware - ATH5K driver does not need any firmware as far
> as I know. The error related to this goes away, but I am no closer to
> getting the driver to work.
>
> Gani
>
> On Apr 21, 9:41 pm, Luca Belluccini <lucabellucc...@gmail.com> wrote:
>
>> It is not working for me. I did the same changes onwifi.c as you
>> pasted here.
>> In Android GUI, I can press Enablewifiand I get:
>> -module insmodded
>> -GUI locked for some seconds
>> -reboot
>> -Android in airplane mode
>> I'm running on a real eeepc701.
>> It seems the hot code causing error is:
>> wifi_load_driver inwifi.c
>>
>> By the way I think we need wpa_supplicant (or it will be launched by
>> Android?).
>> The property wlan.driver.status must be set. But I don't know which
>> value must be set.
>>
>> On 21 Apr, 19:40, Gani Bhagavathula <gani.bhagavath...@gmail.com>
>> wrote:
>>
>>
>>> Luca:
>>>
>>> If I dont use WPA (and have no wpa_supplicant) is it OK just to change
>>> thewifi.c like this, and compile the module and make sure it is in
>>> the init.rc? Will it connect to a WEP protected network at that
>>> point?
>>>
>>> static const char IFACE_DIR[] = "/data/system/
>>> wpa_supplicant";
>>> static const char DRIVER_MODULE_NAME[] = "ath5k";
>>> static const char DRIVER_MODULE_TAG[] = "ath5k ";
>>> static const char DRIVER_MODULE_PATH[] = "/system/lib/modules/
>>> ath5k.ko";
>>> static const char FIRMWARE_LOADER[] = "wlan_loader";
>>> static const char DRIVER_PROP_NAME[] = "wlan.driver.status";
>>>
>>> Regards,
>>> Gani
>>>
>>> On Apr 21, 3:54 pm, Luca Belluccini <lucabellucc...@gmail.com> wrote:
>>>
>>>> I'm with the same module. I set it NOT built-in.
>>>> You are planning to makewifiinteract with Android GUI?
>>>> I modifiedwifi.c specifying the right path to module to be insmodded.
>>>> By the way I'm having the same SIOCSIWAUTH error, starting manually
>>>> the wpa_supplicant.
>>>> I think it's the main problem.
>>>>
>>>> On 21 Apr, 12:59, Androidphan <niels.kee...@tass.nl> wrote:
>>>>
>>>>> I have an Atheros 5007EG wireless network card at my hardware
>>>>> platform. I compiled the kernel(2.6.27) with ath5k built in.
>>>>>
>>>>> Then I compiled wpa_supplicant with CONFIG_WIRELESS_EXTENSIONS=y
>>>>> CONFIG_DRIVER_WEXT=y and CONFIG_CTRL_IFACE=y.
>>>>>
>>>>> Then in my init.rc :
>>>>> mkdir /data/misc/wifi0770wifiwifi
>>>>> mkdir /data/misc/wifi/sockets 0770wifiwifi
>>>>> mkdir /data/system/wpa_supplicant 0770wifiwifi
>>>>> mkdir /data/misc/dhcp 0770 dhcp dhcp
>>>>> chown dhcp dhcp /data/misc/dhcp
>>>>>
>>>>> ifup wlan0
>>>>>
>>>>> service wpa_supplicant /system/bin/logwrapper /system/bin/
>>>>> wpa_supplicant -Dwext -iwlan0 -c/system/etc/wifi/wpa_supplicant.conf -
>>>>> dd
>>>>> groupwifi
>>>>>
>>>>> My wpa_supplicant.conf at /system/etc/wifi/wpa_supplicant.conf :
>>>>>
>>>>> update_config=1
>>>>> ctrl_interface=DIR=/data/system/wpa_supplicant GROUP=system
>>>>>
>>>>> Then when I try to scan with: wpa_cli -p/data/system/wpa_supplicant -
>>>>> iwlan0 and then scan & scan_results, I'm getting no scan results, when
>>>>> I know there are definitly scan results. Because when I scanned with
>>>>> Windows, I do get to see scan results.
>>>>>
>>>>> What is wrong with my configuration?
>>>>>
>>>>> My logcat output from wpa_supplicant:
>>>>>
>>>>> I//system/bin/wpa_supplicant( 2127): Initializing interface 'wlan0'
>>>>> conf '/system/etc/wifi/wpa_supplicant.conf' driver 'wext'
>>>>> ctrl_interface 'N/A' bridge 'N/A'
>>>>> I//system/bin/wpa_supplicant( 2127): Configuration file '/system/etc/
>>>>> wifi/wpa_supplicant.conf' -> '/system/etc/wifi/wpa_supplicant.conf'
>>>>> I//system/bin/wpa_supplicant( 2127): Reading configuration file '/
>>>>> system/etc/wifi/wpa_supplicant.conf'
>>>>> I//system/bin/wpa_supplicant( 2127): update_config=1
>>>>> I//system/bin/wpa_supplicant( 2127): ctrl_interface='DIR=/data/system/
>>>>> wpa_supplicant'
>>>>> I//system/bin/wpa_supplicant( 2127): Initializing interface (2)
>>>>> 'wlan0'
>>>>> I//system/bin/wpa_supplicant( 2127): EAPOL: SUPP_PAE entering state
>>>>> DISCONNECTED
>>>>> I//system/bin/wpa_supplicant( 2127): EAPOL: KEY_RX entering state
>>>>> NO_KEY_RECEIVE
>>>>> I//system/bin/wpa_supplicant( 2127): EAPOL: SUPP_BE entering state
>>>>> INITIALIZE
>>>>> I//system/bin/wpa_supplicant( 2127): EAP: EAP entering state DISABLED
>>>>> I//system/bin/wpa_supplicant( 2127): EAPOL: External notification -
>>>>> portEnabled=0
>>>>> I//system/bin/wpa_supplicant( 2127): EAPOL: External notification -
>>>>> portValid=0
>>>>> I//system/bin/wpa_supplicant( 2127): SIOCGIWRANGE: WE(compiled)=22 WE
>>>>> (source)=21 enc_capa=0xf
>>>>> I//system/bin/wpa_supplicant( 2127): capabilities: key_mgmt 0xf enc
>>>>> 0xf
>>>>> I//system/bin/wpa_supplicant( 2127): WEXT: Operstate: linkmode=1,
>>>>> operstate=5
>>>>> I//system/bin/wpa_supplicant( 2127): Own MAC address:
>>>>> 00:22:43:2c:fa:a6
>>>>> I//system/bin/wpa_supplicant( 2127): wpa_driver_wext_set_wpa
>>>>> I//system/bin/wpa_supplicant( 2127): wpa_driver_wext_set_key: alg=0
>>>>> key_idx=0 set_tx=0 seq_len=0 key_len=0
>>>>> I//system/bin/wpa_supplicant( 2127): wpa_driver_wext_set_key: alg=0
>>>>> key_idx=1 set_tx=0 seq_len=0 key_len=0
>>>>> I//system/bin/wpa_supplicant( 2127): wpa_driver_wext_set_key: alg=0
>>>>> key_idx=2 set_tx=0 seq_len=0 key_len=0
>>>>> I//system/bin/wpa_supplicant( 2127): wpa_driver_wext_set_key: alg=0
>>>>> key_idx=3 set_tx=0 seq_len=0 key_len=0
>>>>> I//system/bin/wpa_supplicant( 2127):
>>>>> wpa_driver_wext_set_countermeasures
>>>>> I//system/bin/wpa_supplicant( 2127): ioctl[SIOCSIWAUTH]: Operation not
>>>>> supported on transport endpoint
>>>>> I//system/bin/wpa_supplicant( 2127): WEXT auth param 4 value 0x0 -
>>>>> wpa_driver_wext_set_drop_unencrypted
>>>>> I//system/bin/wpa_supplicant( 2127): Setting scan request: 0 sec
>>>>> 100000 usec
>>>>> I//system/bin/wpa_supplicant( 2127): Using existing control interface
>>>>> directory.
>>>>> I//system/bin/wpa_supplicant( 2127): ctrl_iface bind(PF_UNIX) failed:
>>>>> Address already in use
>>>>> I//system/bin/wpa_supplicant( 2127): ctrl_iface exists, but does not
>>>>> allow connections - assuming it was leftover from forced program
>>>>> termination
>>>>> I//system/bin/wpa_supplicant( 2127): Successfully replaced leftover
>>>>> ctrl_iface socket '/data/system/wpa_supplicant/wlan0'
>>>>> I//system/bin/wpa_supplicant( 2127): Added interface wlan0
>>>>> I//system/bin/wpa_supplicant( 2127): RTM_NEWLINK: operstate=0
>>>>> ifi_flags=0x1003 ([UP])
>>>>> I//system/bin/wpa_supplicant( 2127): RTM_NEWLINK, IFLA_IFNAME:
>>>>> Interface 'wlan0' added
>>>>> I//system/bin/wpa_supplicant( 2127): Wireless event: cmd=0x8b06 len=8
>>>>> I//system/bin/wpa_supplicant( 2127): State: DISCONNECTED -> SCANNING
>>>>> I//system/bin/wpa_supplicant( 2127): CTRL-EVENT-STATE-CHANGE id=-1
>>>>> state=2
>>>>> I//system/bin/wpa_supplicant( 2127): Starting AP scan (broadcast SSID)
>>>>> I//system/bin/wpa_supplicant( 2127): Trying to get current scan
>>>>> results first without requesting a new scan to speed up initial
>>>>> association
>>>>> I//system/bin/wpa_supplicant( 2127): Received 0 bytes of scan results
>>>>> (0 BSSes)
>>>>> I//system/bin/wpa_supplicant( 2127): Scan results: 0
>>>>> I//system/bin/wpa_supplicant( 2127): CTRL-EVENT-SCAN-RESULTS Ready
>>>>>
Hi, the problem here is the java parsing function wait a minus after if
I remember
the signal streght, and It can't parse. When you receive the scan result
event, the
comunicattion with wpa supplicant is up. Android lunch the wpa_supplicant
Michael
>>>>> I//system/bin/wpa_supplicant( 2127): No suitable AP found.
>>>>> I//system/bin/wpa_supplicant( 2127): Setting scan request: 0 sec 0
>>>>> usec
>>>>> I//system/bin/wpa_supplicant( 2127): No enabled networks - do not scan
>>>>> I//system/bin/wpa_supplicant( 2127): State: SCANNING -> INACTIVE
>>>>> I//system/bin/wpa_supplicant( 2127): CTRL-EVENT-STATE-CHANGE id=-1
>>>>> state=1
>>>>> .....
>>>>> .....
>>>>> I//system/bin/wpa_supplicant( 2127): RX ctrl_iface - hexdump_ascii
>>>>> (len=6):
>>>>> I//system/bin/wpa_supplicant( 2127): 53 54 41 54 55
>>>>> 53 STATUS
>>>>> I//system/bin/wpa_supplicant( 2127): RX ctrl_iface - hexdump_ascii
>>>>> (len=11):
>>>>> I//system/bin/wpa_supplicant( 2127): 44 52 49 56 45 52 20 52 53
>>>>> 53 49 DRIVER RSSI
>>>>> I//system/bin/wpa_supplicant( 2127): RX ctrl_iface - hexdump_ascii
>>>>> (len=16):
>>>>> I//system/bin/wpa_supplicant( 2127): 44 52 49 56 45 52 20 4c 49
>>>>> 4e 4b 53 50 45 45 44 DRIVER LINKSPEED
>>>>> I//system/bin/wpa_supplicant( 2127): RX ctrl_iface - hexdump_ascii
>>>>> (len=14):
>>>>> I//system/bin/wpa_supplicant( 2127): 44 52 49 56 45 52 20 4d 41
>>>>> 43 41 44 44 52 DRIVER MACADDR
>>>>> V/WifiStateTracker( 2137): Connection to supplicant established,
>>>>> state=INACTIVE
>>>>> I//system/bin/wpa_supplicant( 2127): RX ctrl_iface - hexdump_ascii
>>>>> (len=21):
>>>>> I//system/bin/wpa_supplicant( 2127): 44 52 49 56 45 52 20 52 58
>>>>> 46 49 4c 54 45 52 2d DRIVER RXFILTER-
>>>>> I//system/bin/wpa_supplicant( 2127): 41 44 44 20
>>>>> 30 ADD 0
>>>>> I//system/bin/wpa_supplicant( 2127): RX ctrl_iface - hexdump_ascii
>>>>> (len=22):
>>>>> I//system/bin/wpa_supplicant( 2127): 44 52 49 56 45 52 20 42 54
>>>>> 43 4f 45 58 53 43 41 DRIVER BTCOEXSCA
>>>>> I//system/bin/wpa_supplicant( 2127): 4e 2d 53 54 4f
>>>>> 50 N-STOP
>>>>> ....
>>>>> ....
>>>>> I//system/bin/wpa_supplicant( 2127): 42 4c 41 43 4b 4c 49 53 54
>>>>> 20 63 6c 65 61 72 BLACKLIST clear
>>>>> I//system/bin/wpa_supplicant( 2127): CTRL_IFACE: bssid=' clear'
>>>>> I//system/bin/wpa_supplicant( 2127): Setting scan request: 0 sec 0
>>>>> usec
>>>>> I//system/bin/wpa_supplicant( 2127): No enabled networks - do not scan
>>>>> I//system/bin/wpa_supplicant( 2127): State: INACTIVE -> INACTIVE
>>>>> I//system/bin/wpa_supplicant( 2127): CTRL-EVENT-STATE-CHANGE id=-1
>>>>> state=1
>>>>> I//system/bin/wpa_supplicant( 2127): CTRL_IFACE monitor send - hexdump
>>>>> (len=40): 2f 64 61 74 61 2f 6d 69 73 63 2f 77 69 66 69 2f 73 6f 63 6b
>>>>> 65 74 73 2f 77 70 61 5f 63 74 72 6c 5f 32 31 33 37 2d 31 00
>>>>>
> >
>
>
--~--~---------~--~----~------------~-------~--~----~
unsubscribe: android-porting+unsubscr...@googlegroups.com
website: http://groups.google.com/group/android-porting
-~----------~----~----~----~------~----~------~--~---
