Can you please send me the logs of "logcat -b radio" from adb shell?
On Thu, Jun 4, 2009 at 2:37 PM, Sayiram K N <[email protected]>wrote: > the setup is like this > first i switched my Motorola Phone to USB Modem mode and tried on Widnwos > environment using AT commands could able to call. and tried on Linux > environment too and its working fine. But from the Android not able to make > any calls. > The linux PC is recognising my Phone modem as ttyACM0. > i am using emulator -radio /dev/ttyACM0 once the emulator launched from the > consle launched adb shell and given the commands echo "ATD1234;" > > /dev/ttyS0 can you let me know whether this is correct or not. > can you let me know your ways of calling too. > > On Thu, Jun 4, 2009 at 2:25 PM, Rakesh Kumar <[email protected]>wrote: > >> phone pn means what? I am using a external modem >> >> >> On Thu, Jun 4, 2009 at 2:12 PM, Sayiram K N <[email protected]>wrote: >> >>> can you pl. let me know how to make calls using emulator's dialer?? i >>> have connected my phone pn to /dev/ttyACM0 and tried all possibilities. but >>> no luck. >>> can you let me know the steps to make calls?? >>> >>> >>> >>> On Thu, Jun 4, 2009 at 1:13 PM, Rakesh Kumar <[email protected]>wrote: >>> >>>> You can make the call using the emulator dialer. And when you make the >>>> call to your external modem than you can see the logs of incoming call >>>> using >>>> adb shell. >>>> >>>> >>>> On Thu, Jun 4, 2009 at 12:37 PM, Sayiram K N <[email protected] >>>> > wrote: >>>> >>>>> After the connection are you using the following >>>>> adb shell >>>>> # echo "ATD123445" > ttyS0 >>>>> ?? if not what are the commands you are using>> >>>>> Sram >>>>> >>>>> On Thu, Jun 4, 2009 at 10:07 AM, Rakesh Kumar <[email protected] >>>>> > wrote: >>>>> >>>>>> I am able to connect emulator with an external modem. My modem is >>>>>> connected to PC at port /dev/ttyS0. >>>>>> And with the command "emulator -radio /dev/ttyS0", its working. >>>>>> >>>>>> >>>>>> Thanks >>>>>> Rakesh >>>>>> >>>>>> >>>>>> On Wed, Jun 3, 2009 at 5:39 PM, David Turner <[email protected]>wrote: >>>>>> >>>>>>> >>>>>>> On Wed, Jun 3, 2009 at 11:24 AM, sram <[email protected]>wrote: >>>>>>> >>>>>>>> >>>>>>>> Hi >>>>>>>> i am trying to connect USB external modem(my Motorola Phone) on to >>>>>>>> Android emulator. i have tried the following command >>>>>>>> emulator -radio ttyACM0 -verbose -debug all >>>>>>>> and from the ADB shell tried echo "ATD1234" > ttyS1 but there is >>>>>>>> nothing happened. >>>>>>>> >>>>>>> >>>>>>> ttyS1 is not connected to the emulated modem at all. Actually, none >>>>>>> of the emulated serial ports are, >>>>>>> so it's not surprising that this doesn't work. >>>>>>> >>>>>>> >>>>>>>> >>>>>>>> as well itried using the local host 5554 and then gsm call 12344555 >>>>>>>> but got the rror message " KO: Modem Emulation not started" can any >>>>>>>> one help me in this. >>>>>>> >>>>>>> >>>>>>> Probably because the GSM stack tried to talk with your ttyACM0 device >>>>>>> and got answers it could not >>>>>>> parse properly, for some reason. Try "adb logcat -b radio" to display >>>>>>> the radio log, which includes the >>>>>>> AT commands exchanged between the modem and the stack. >>>>>>> >>>>>>> >>>>>>> >>>>>>>> >>>>>>>> Sram >>>>>>>> >>>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>> >>>> >>>> >>>> >>>> >> >> >> >> >> --~--~---------~--~----~------------~-------~--~----~ unsubscribe: [email protected] website: http://groups.google.com/group/android-porting -~----------~----~----~----~------~----~------~--~---
