If you are using pcnet-pci card, you need to compile the kernel with CONFIG_PCNET32 set in the kernel configuration. You can change it to e1000 if your kernel has e1000 driver. By default, neither is enabled. You may need to enable them if you want to use. -- Chen 2009/6/16 GrainWang <[email protected]>
> > HI ChenYang: > Thanks! Is there any other configration to set to make sure the > adb is ok? Yesterday, I successfuly connected the adb with > virtualbox,But today, when I new a project with the same configraion > and installed.vdi,and never successful again. I choosed the pcnet-pci > network adapter. do i need to recompile the kernel to enable the e1000 > driver? Thanks! > On 6月15日, 下午6时36分, Chen Yang <[email protected]> wrote: > > You may need to set the state to tell the system: > > try: > > #setprop EXTERNAL_STORAGE_STATE mounted > > Then see whether it works or not. > > -- > > Chen > > 2009/6/15 GrainWang <[email protected]> > > > > > > > > > > > > > HI ChenYang: > > > According to your method,the adb was succesfully connected to the > > > virtualbox. But after push several test clips in the /sdcard path, the > > > "gallery" still prompt "No media found", does you know the reason? And > > > how can I do to make the clips availble in the virtual box?Thanks! > > > > > On 6月15日, 下午3时32分, Chen Yang <[email protected]> wrote: > > > > Oh, the ethernet card driver should match the network configuration > in > > > the > > > > virtualbox, typically > > > > it provides the support of intel e1000 and PCnet-pci. I have used > > > e1000/NAT. > > > > Then in order to let the adb can find it, you may need to specify the > > > port > > > > forwarding via: > > > > VBoxManage setextradata "$YOUR_GUEST " > > > > "VBoxInternal/Devices/pcnet/0/LUN#0/Config/guestssh/Protocol" > TCP > > > > VBoxManage setextradata "$YOUR_GUEST" > > > > > "VBoxInternal/Devices/pcnet/0/LUN#0/Config/guestssh/GuestPort" > > > 5555 > > > > VBoxManage setextradata "$YOUR_GUEST" > > > > "VBoxInternal/Devices/pcnet/0/LUN#0/Config/guestssh/HostPort" > > > 5555 > > > > then it may work. > > > > > > I haven't played the virtual ethernet pair. But you can try to see > > > whether > > > > you can list its ip address by netcfg in the virtualbox environment > by > > > > alt+f1. And see whether you can ping that address in your host, if > you > > > can > > > > ping that address, try to set the address to environment variable > ADBHOST > > > > and use "adb kill-server" and then "adb devices" to list the device. > > > > > > -- > > > > Chen > > > > > > 2009/6/15 GrainWang <[email protected]> > > > > > > > HI ChenYang: > > > > > The issue now is when using adb push, there is error message"No > > > > > device found", when I do make menuconfig, I choose "Device > drivers"- > > > > > >"Network device support"->"virtual ethernet pair", and replaced > the > > > > > built image. Is this all needed for the kernel?When virtualbox > booted, > > > > > I choose "google search" to search in the website, the network > > > > > connection is ok. Does adb need some aditional configations? Is > there > > > > > any guide exist for this? Also, when selecting "gallery", there is > > > > > always "No media found", even when I insert a mini sd card and a > usb > > > > > disk which both contain the test clips.How to let the test clips > > > > > avaiable in virtual box? Thanks in advance! > > > > > On 6月15日, 上午11时44分, Chen Yang <[email protected]> wrote: > > > > > > hi, Grain: > > > > > > It's available in the built directory: > > > > > > mydroid/out/host/linux-x86/bin > > > > > > export it to the PATH, then you can use it easily. > > > > > > -- > > > > > > Chen > > > > > > 2009/6/15 GrainWang <[email protected]> > > > > > > > > > HI ChenYang: > > > > > > > I tried "adb push" first before I posted the topic, just show > that > > > > > > > "adb: command not found"? do I still need something tools and > > > where's > > > > > > > the link? Thanks! > > > > > > > > > On 6月15日, 上午10时27分, Chen Yang <[email protected]> wrote: > > > > > > > > How about trying "adb push"? It needs the network being > > > configured > > > > > > > properly, > > > > > > > > you may need to compile the kernel supports the virtual > ethernet > > > card > > > > > > > that > > > > > > > > virtualbox emulates. > > > > > > > > -- > > > > > > > > Chen > > > > > > > > > > 2009/6/15 GrainWang <[email protected]> > > > > > > > > > > > HI Sammy: > > > > > > > > > Thanks! Is there any way to add files in virtuabox after > the > > > > > > > > > system booting? > > > > > > > > > > > On 6月12日, 下午4时22分, Sammy <[email protected]> wrote: > > > > > > > > > > Press Alt + F1 to show console > > > > > > > > > > Press Alt + F7 to show GUI > > > > > > > > > > > > On Jun 12, 3:59 pm, GrainWang <[email protected]> > wrote: > > > > > > > > > > > > > Hi All: > > > > > > > > > > > When virtualbox succeeded to boot, it show up in > > > window > > > > > > > > > > > mode,and I have not found the shell to get into command > > > line > > > > > > > mode,does > > > > > > > > > > > anyone know the solution?I'll frequently tranfser > between > > > the > > > > > two > > > > > > > > > > > modes just like in a real linux. Thanks!- 隐藏被引用文字 - > > > > > > > > > > > > - 显示引用的文字 -- 隐藏被引用文字 - > > > > > > > > > > - 显示引用的文字 -- 隐藏被引用文字 - > > > > > > > > - 显示引用的文字 -- 隐藏被引用文字 - > > > > > > - 显示引用的文字 -- 隐藏被引用文字 - > > > > - 显示引用的文字 - > > > --~--~---------~--~----~------------~-------~--~----~ unsubscribe: [email protected] website: http://groups.google.com/group/android-porting -~----------~----~----~----~------~----~------~--~---
