2009/8/26 pavan savoy <[email protected]>: > It kind of became platform specific, the product brief > http://www.broadcom.com/collateral/pb/4325-PB00-R.pdf only mentions uart - > not usb-2-uart. >
hi Pavan, Yes, it is a matter of platform specific. USB is common for several bcm4325 based hardware module. That is why I mentioned USB in my previous mail. > so when you mentioned usb-serial - did you mean on some platform it is > connected to the host-processor via usb ? > and at boot the usb-serial is probed - to give out ttyusb0/1/2/3 and then > one of such 4 ports is connected to bcm ? > If you are using on-board chipset, you should check the proper communications: usb-serial, high speed UART / FFUART, etc. However, can you share the configurations in your platform? Thanks, Jim Huang (jserv) http://0xlab.org/ --~--~---------~--~----~------------~-------~--~----~ unsubscribe: [email protected] website: http://groups.google.com/group/android-porting -~----------~----~----~----~------~----~------~--~---
