Hi here are the contents of the alsa_amixer controls command alsa_amixer all controls
numid=5,iface=MIXER,name='Master Mono Playback Switch' numid=6,iface=MIXER,name='Master Mono Playback Volume' numid=1,iface=MIXER,name='Master Playback Switch' numid=2,iface=MIXER,name='Master Playback Volume' numid=3,iface=MIXER,name='Headphone Playback Switch' numid=4,iface=MIXER,name='Headphone Playback Volume' numid=29,iface=MIXER,name='3D Control - Center' numid=30,iface=MIXER,name='3D Control - Depth' numid=26,iface=MIXER,name='3D Control - Switch' numid=25,iface=MIXER,name='PCM Out Path & Mute' numid=20,iface=MIXER,name='PCM Playback Switch' numid=21,iface=MIXER,name='PCM Playback Volume' numid=37,iface=MIXER,name='Front Playback Switch' numid=36,iface=MIXER,name='Front Playback Volume' numid=14,iface=MIXER,name='Line Playback Switch' numid=15,iface=MIXER,name='Line Playback Volume' numid=16,iface=MIXER,name='CD Playback Switch' numid=17,iface=MIXER,name='CD Playback Volume' numid=13,iface=MIXER,name='Mic Boost (+20dB)' numid=28,iface=MIXER,name='Mic Select' numid=11,iface=MIXER,name='Mic Playback Switch' numid=12,iface=MIXER,name='Mic Playback Volume' numid=9,iface=MIXER,name='Phone Playback Switch' numid=10,iface=MIXER,name='Phone Playback Volume' numid=18,iface=MIXER,name='Video Playback Switch' numid=7,iface=MIXER,name='PC Speaker Playback Switch' numid=8,iface=MIXER,name='PC Speaker Playback Volume' numid=19,iface=MIXER,name='Aux Playback Switch' numid=27,iface=MIXER,name='Mono Output Select' numid=22,iface=MIXER,name='Capture Source' numid=23,iface=MIXER,name='Capture Switch' numid=24,iface=MIXER,name='Capture Volume' numid=31,iface=MIXER,name='IEC958 Playback Con Mask' numid=32,iface=MIXER,name='IEC958 Playback Pro Mask' numid=35,iface=MIXER,name='IEC958 Playback AC97-SPSA' numid=33,iface=MIXER,name='IEC958 Playback Default' numid=34,iface=MIXER,name='IEC958 Playback Switch' I have turned on the Master, PCM, CD, PC Speaker, Video. Does anything else need to be turned on? The headphone jacks for the Stereo and Mono both work but not the speaker on the board. Thanks. On Oct 13, 7:23 am, Misael Lopez <[email protected]> wrote: > mixer controls are dependent of your hardware (not mentioned). You > should have some controls to specify active output path (like a mux) > or to enable speaker output (when hardware can route same audio to > different outputs). Do 'amixer controls', names are usually > self-descriptive. > > -Misa > > 2009/10/12 Claw <[email protected]>: > > > > > Hi, > > > When the alsa_aplay is used, I get the sound only on the headphone and > > not on the speaker of the sound card connected to my hardware. > > > I have used the alsa_amixer as below to set up the sound. > > alsa_amixer set Master 100 unmute > > alsa_amixer set Headphone 100 unmute > > alsa_amixer set PCM 100 unmute. > > > Any suggestions what else could be set in order to obtain the sound > > working from the speakers? > > > Thanks. --~--~---------~--~----~------------~-------~--~----~ unsubscribe: [email protected] website: http://groups.google.com/group/android-porting -~----------~----~----~----~------~----~------~--~---
