Also don't forget to create the following link: etc -> /system/etc etc needs to be in the root
On Wed, Dec 9, 2009 at 8:27 PM, hedwin <[email protected]> wrote: > I unpack the images so I am sure I have everything. I use the init.rc as is. > > Hedwin Koning > > On Wed, Dec 9, 2009 at 3:34 PM, Alexey Roslyakov > <[email protected]> wrote: >> It's not required to unpack smth. - all files are available in out/ >> target/product/<product_name>/root && out/target/product/ >> <product_name>/system >> You could copy system into root and use single NFS share. Also you >> have to change init.rc and comment out mount commands that's not >> needed. >> >> On 9 дек, 15:12, hedwin <[email protected]> wrote: >>> Ok, am using NFS as well. >>> >>> To get an RFS for a NFS based system the only thing you need to do is >>> unpack the ramdisk, userdata and system images. >>> If you are using android cupcake you should be able to mount the >>> images it as a ext2 filesystem and extract the data. >>> For donut you need to mount it as a yaffs2 filesystem. There is also a >>> tooling that can do the extracting for you, tool is call unyaffs2. >>> What is left is to tell the kernel that you are using an NFS rootfs >>> and set the correct init in the kernel command line. >>> >>> Hedwin Koning >>> >>> On Wed, Dec 9, 2009 at 12:42 PM, linux newbie <[email protected]> >>> wrote: >>> > currently I am planning to use NFS as I have only 32MB Flash, but soon >>> > will be upgrading to higher capacity. >>> >>> > On Wed, Dec 9, 2009 at 5:19 PM, hedwin <[email protected]> wrote: >>> >> What are you using flash or NFS? >>> >>> >> Hedwin Koning >>> >>> >> On Wed, Dec 9, 2009 at 5:00 AM, linux newbie <[email protected]> >>> >> wrote: >>> >>> Hi, >>> >>> >>> I compiled linux_2_6_31_1 with Android support for my target PXA255 >>> >>> based platform. >>> >>> >>> Next step is to add, android specific files i.e system & data in the >>> >>> Root File System. Can anybody let me know how to do this step? >>> >>> >>> Is there any link that gives step-by-step instructions? >>> >>> >>> Thanks >>> >>> >>> On Mon, Dec 7, 2009 at 3:43 PM, Anil Sasidharan <[email protected]> >>> >>> wrote: >>> >>>> Hi, >>> >>> >>>> Android = android-kernel + android-userspace >>> >>> >>>> Warm Regards, >>> >>>> Anil >>> >>> >>>> On Mon, Dec 7, 2009 at 6:59 AM, linux newbie <[email protected]> >>> >>>> wrote: >>> >>> >>>>> Hi, >>> >>> >>>>> I enabled Android specific configurations in linux 2.6.31 distribution >>> >>>>> i.e using make menuconfig. Compiled the kernel and booted it in my >>> >>>>> platform. >>> >>> >>>>> I couldnt find any difference (ofcourse, I havent updated my root file >>> >>>>> system) as I was expecting android logo while booting. >>> >>> >>>>> do we need to have root file system with android specific binaries in >>> >>>>> order to have boot image?? >>> >>> >>>>> Thanks >>> >>> >>>>> On Mon, Dec 7, 2009 at 10:22 AM, linux newbie >>> >>>>> <[email protected]> >>> >>>>> wrote: >>> >>>>> > Hi, >>> >>> >>>>> > Thanks for your email. >>> >>> >>>>> > Can you please let me know the link from which I can download the >>> >>>>> > Android-patch (against linux kernel)? >>> >>> >>>>> > 2009/12/7 தங்கமணி அருண் <[email protected]>: >>> >>> >>>>> >> 2009/12/4 android_newbie <[email protected]> >>> >>> >>>>> >>> Hi All, >>> >>> >>>>> >>> Our ARM based embedded platform runs on linux-2.6.31 kernel >>> >>>>> >>> version. >>> >>>>> >>> We want to port android on top of it. We first want to boot the >>> >>>>> >>> board >>> >>>>> >>> with Android and then proceed with application development. >>> >>> >>>>> >>> After going though the android related websites the following is >>> >>>>> >>> my >>> >>>>> >>> understanding and please correct me if I am wrong. >>> >>> >>>>> >>> 1. Download Android kernel patch against the linux version. >>> >>>>> >>> 2. Apply the patch and compile the kernel. >>> >>> >>>>> >> kernel.org + android-patch+your board specific patch--> then >>> >>>>> >> compile >>> >>> >>>>> >>> 3. Boot the system. >>> >>> >>>>> >>> Please let me know if I miss anything. >>> >>> >>>>> >>> Thanks >>> >>> >>>>> >>> -- >>> >>>>> >>> unsubscribe: [email protected] >>> >>>>> >>> website:http://groups.google.com/group/android-porting >>> >>> >>>>> >> -- >>> >>>>> >> அன்புடன் >>> >>>>> >> அருண் >>> >>>>> >> ------------------------------ >>> >>>>> >>http://ubuntu-tam.org >>> >>>>> >>http://lists.ubuntu.com/ubuntu-l10n-tam >>> >>>>> >>http://lists.ubuntu.com/ubuntu-tam >>> >>>>> >> ------------------------------ >>> >>> >>>>> >> -- >>> >>>>> >> unsubscribe: [email protected] >>> >>>>> >> website:http://groups.google.com/group/android-porting >>> >>> >>>>> -- >>> >>>>> unsubscribe: [email protected] >>> >>>>> website:http://groups.google.com/group/android-porting >>> >>> >>>> -- >>> >>>> unsubscribe: [email protected] >>> >>>> website:http://groups.google.com/group/android-porting >>> >>> >>> -- >>> >>> unsubscribe: [email protected] >>> >>> website:http://groups.google.com/group/android-porting >>> >>> >> -- >>> >> unsubscribe: [email protected] >>> >> website:http://groups.google.com/group/android-porting >>> >>> > -- >>> > unsubscribe: [email protected] >>> > website:http://groups.google.com/group/android-porting >> >> -- >> unsubscribe: [email protected] >> website: http://groups.google.com/group/android-porting > -- unsubscribe: [email protected] website: http://groups.google.com/group/android-porting
