Hi, In the init.rc file, I commented out yaffs2 as I am booting from USB using chroot and remounted rootfs with 'rw' premission otherwise unable to create files in /data.
Now on giving chroot /mnt /init, I am getting following messages repeated. I downloaded the source and compiled for generic product and trying to bring up this root file system on my target. Is this the right way of doing? D/AndroidRuntime( 1982): >>>>>>>>>>>>>> AndroidRuntime START <<<<<<<<<<<<<< D/AndroidRuntime( 1982): CheckJNI is OFF D/AndroidRuntime( 1982): --- registering native functions --- I/SamplingProfilerIntegration( 1982): Profiler is disabled. I/Zygote ( 1982): Preloading classes... D/dalvikvm( 1982): GC freed 791 objects / 50440 bytes in 7ms D/dalvikvm( 1982): GC freed 255 objects / 16392 bytes in 7ms D/dalvikvm( 1982): GC freed 298 objects / 19120 bytes in 9ms D/dalvikvm( 1982): GC freed 222 objects / 14224 bytes in 10ms D/dalvikvm( 1982): GC freed 415 objects / 26456 bytes in 12ms D/skia ( 1982): ------ build_power_table 1.4 D/skia ( 1982): ------ build_power_table 0.714286 D/dalvikvm( 1982): GC freed 419 objects / 28904 bytes in 13ms D/dalvikvm( 1982): Trying to load lib /system/lib/libmedia_jni.so 0x0 D/dalvikvm( 1982): Added shared lib /system/lib/libmedia_jni.so 0x0 D/dalvikvm( 1982): Trying to load lib /system/lib/libexif.so 0x0 D/dalvikvm( 1982): Added shared lib /system/lib/libexif.so 0x0 D/dalvikvm( 1982): GC freed 2289 objects / 119760 bytes in 18ms D/dalvikvm( 1982): Trying to load lib /system/lib/libmedia_jni.so 0x0 D/dalvikvm( 1982): Shared lib '/system/lib/libmedia_jni.so' already loaded in same CL 0x0 D/dalvikvm( 1982): Trying to load lib /system/lib/libmedia_jni.so 0x0 D/dalvikvm( 1982): Shared lib '/system/lib/libmedia_jni.so' already loaded in same CL 0x0 D/dalvikvm( 1982): Trying to load lib /system/lib/libmedia_jni.so 0x0 D/dalvikvm( 1982): Shared lib '/system/lib/libmedia_jni.so' already loaded in same CL 0x0 D/dalvikvm( 1982): Trying to load lib /system/lib/libmedia_jni.so 0x0 D/dalvikvm( 1982): Shared lib '/system/lib/libmedia_jni.so' already loaded in same CL 0x0 D/dalvikvm( 1982): GC freed 3790 objects / 197016 bytes in 30ms D/dalvikvm( 1982): GC freed 461 objects / 26360 bytes in 42ms D/dalvikvm( 1982): GC freed 292 objects / 16952 bytes in 29ms D/dalvikvm( 1982): GC freed 204 objects / 11424 bytes in 31ms D/dalvikvm( 1982): GC freed 178 objects / 9544 bytes in 34ms D/dalvikvm( 1982): Trying to load lib /system/lib/libsrec_jni.so 0x0 D/dalvikvm( 1982): Added shared lib /system/lib/libsrec_jni.so 0x0 D/dalvikvm( 1982): Trying to load lib /system/lib/libsrec_jni.so 0x0 D/dalvikvm( 1982): Shared lib '/system/lib/libsrec_jni.so' already loaded in same CL 0x0 D/dalvikvm( 1982): GC freed 296 objects / 34704 bytes in 35ms D/dalvikvm( 1982): GC freed 123 objects / 24504 bytes in 51ms D/dalvikvm( 1982): GC freed 337 objects / 38432 bytes in 51ms D/dalvikvm( 1982): GC freed 418 objects / 25840 bytes in 53ms D/dalvikvm( 1982): Trying to load lib /system/lib/libwebcore.so 0x0 I/dalvikvm( 1982): Unable to dlopen(/system/lib/libwebcore.so): Cannot load library: load_library[1052]: Library '/system/lib/libwebcore.so' not found W/dalvikvm( 1982): Exception Ljava/lang/UnsatisfiedLinkError; thrown during Landroid/webkit/WebViewCore;.<clinit> E/Zygote ( 1982): Error preloading android.webkit.WebViewCore. E/Zygote ( 1982): java.lang.ExceptionInInitializerError E/Zygote ( 1982): at java.lang.Class.classForName(Native Method) E/Zygote ( 1982): at java.lang.Class.forName(Class.java:237) E/Zygote ( 1982): at java.lang.Class.forName(Class.java:183) E/Zygote ( 1982): at com.android.internal.os.ZygoteInit.preloadClasses(ZygoteInit.java:295) E/Zygote ( 1982): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:582) E/Zygote ( 1982): at dalvik.system.NativeStart.main(Native Method) E/Zygote ( 1982): Caused by: java.lang.UnsatisfiedLinkError: Library webcore not found E/Zygote ( 1982): at java.lang.Runtime.loadLibrary(Runtime.java:489) E/Zygote ( 1982): at java.lang.System.loadLibrary(System.java:557) E/Zygote ( 1982): at android.webkit.WebViewCore.<clinit>(WebViewCore.java:56) E/Zygote ( 1982): ... 6 more D/AndroidRuntime( 1982): Shutting down VM W/dalvikvm( 1982): threadid=3: thread exiting with uncaught exception (group=0x4001b198) D/dalvikvm( 1982): DestroyJavaVM waiting for non-daemon threads to exit D/dalvikvm( 1982): DestroyJavaVM shutting VM down D/dalvikvm( 1982): VM cleaning up D/dalvikvm( 1982): LinearAlloc 0x0 used 1659804 of 5242880 (31%) D/skia ( 1982): purging 6K from font cache [1 entries] I/ServiceManager( 1180): service 'media.audio_flinger' died I/ServiceManager( 1180): service 'media.player' died I/ServiceManager( 1180): service 'media.camera' died I/ServiceManager( 1180): service 'media.audio_policy' died I/ ( 1999): ServiceManager: 0xad08 W/AudioHardwareInterface( 1999): Using stubbed audio hardware. No sound will be produced. D/AudioHardwareInterface( 1999): setMode(NORMAL) I/CameraService( 1999): CameraService started: pid=1999 I/AudioFlinger( 1999): AudioFlinger's thread 0xb370 ready to run D/AndroidRuntime( 2008): On Tue, Dec 22, 2009 at 4:07 PM, linux newbie <[email protected]> wrote: > additional logcat messages > > D/AndroidRuntime( 1052): >>>>>>>>>>>>>> AndroidRuntime START <<<<<<<<<<<<<< > D/AndroidRuntime( 1052): CheckJNI is OFF > E/dalvikvm( 1052): Can't open dex cache > '/data/dalvik-cache/sys...@framework@[email protected]': No such > file or directory > I/dalvikvm( 1052): Unable to open or create cache for > /system/framework/core.jar > (/data/dalvik-cache/sys...@framework@[email protected]) > D/dalvikvm( 1052): Unable to process classpath element > '/system/framework/core.jar' > E/dalvikvm( 1052): Can't open dex cache > '/data/dalvik-cache/sys...@framework@[email protected]': No such > file or directory > I/dalvikvm( 1052): Unable to open or create cache for > /system/framework/ext.jar > (/data/dalvik-cache/sys...@framework@[email protected]) > D/dalvikvm( 1052): Unable to process classpath element > '/system/framework/ext.jar' > E/dalvikvm( 1052): Can't open dex cache > '/data/dalvik-cache/sys...@framework@[email protected]': No > such file or directory > I/dalvikvm( 1052): Unable to open or create cache for > /system/framework/framework.jar > (/data/dalvik-cache/sys...@framework@[email protected]) > D/dalvikvm( 1052): Unable to process classpath element > '/system/framework/framework.jar' > E/dalvikvm( 1052): Can't open dex cache > '/data/dalvik-cache/sys...@[email protected][email protected]': > No such file or directory > I/dalvikvm( 1052): Unable to open or create cache for > /system/framework/android.policy.jar > (/data/dalvik-cache/sys...@[email protected][email protected]) > D/dalvikvm( 1052): Unable to process classpath element > '/system/framework/android.policy.jar' > E/dalvikvm( 1052): Can't open dex cache > '/data/dalvik-cache/sys...@framework@[email protected]': No > such file or directory > I/dalvikvm( 1052): Unable to open or create cache for > /system/framework/services.jar > (/data/dalvik-cache/sys...@framework@[email protected]) > D/dalvikvm( 1052): Unable to process classpath element > '/system/framework/services.jar' > E/dalvikvm( 1052): ERROR: no valid entries found in bootclasspath > '/system/framework/core.jar:/system/framework/ext.jar:/system/framework/framework.jar:/system/framework/android.policy.jar:/system/framework/services.jar' > D/dalvikvm( 1052): VM cleaning up > D/dalvikvm( 1052): LinearAlloc 0x0 used 4100 of 5242880 (0%) > W/dalvikvm( 1052): JNI_CreateJavaVM failed > E/AndroidRuntime( 1052): JNI_CreateJavaVM failed > I/ ( 1054): ServiceManager: 0xad08 > W/AudioHardwareInterface( 1054): Using stubbed audio hardware. No > sound will be produced. > D/AudioHardwareInterface( 1054): setMode(NORMAL) > I/CameraService( 1054): CameraService started: pid=1054 > I/AudioFlinger( 1054): AudioFlinger's thread 0xb370 ready to run > E/keystore( 1080): chdir: /data/misc/keystore: No such file or directory > D/AndroidRuntime( 1079): > > On Tue, Dec 22, 2009 at 3:55 PM, linux newbie <[email protected]> > wrote: >> It seems from init.rc, data/misc/keystore directory is unable to be created. >> >> any idea on the possible cause? >> >> On Tue, Dec 22, 2009 at 3:45 PM, linux newbie <[email protected]> >> wrote: >>> Thanks for your reply Anil. >>> >>> On issuing logcat command, I got the following response. >>> >>> # logcat >>> I/DEBUG ( 1141): debuggerd: Dec 14 2009 20:00:01 >>> I/vold ( 1140): Android Volume Daemon version 2.0 >>> E/vold ( 1140): Unable to open '/sys/class/mmc_host' (No such file >>> or directory) >>> E/vold ( 1140): Unable to open '/sys/class/switch' (No such file or >>> directory) >>> D/vold ( 1140): Bootstrapping complete >>> E/keystore( 1152): chdir: /data/misc/keystore: No such file or directory >>> E/keystore( 1171): chdir: /data/misc/keystore: No such file or directory >>> E/keystore( 1198): chdir: /data/misc/keystore: No such file or directory >>> E/keystore( 1221): chdir: /data/misc/keystore: No such file or directory >>> E/keystore( 1244): chdir: /data/misc/keystore: No such file or directory >>> E/keystore( 1267): chdir: /data/misc/keystore: No such file or directory >>> E/keystore( 1288): chdir: /data/misc/keystore: No such file or directory >>> E/keystore( 1309): chdir: /data/misc/keystore: No such file or directory >>> E/keystore( 1330): chdir: /data/misc/keystore: No such file or directory >>> E/keystore( 1351): chdir: /data/misc/keystore: No such file or directory >>> E/keystore( 1372): chdir: /data/misc/keystore: No such file or directory >>> E/keystore( 1393): chdir: /data/misc/keystore: No such file or directory >>> E/keystore( 1410): chdir: /data/misc/keystore: No such file or directory >>> E/keystore( 1431): chdir: /data/misc/keystore: No such file or directory >>> >>> On Tue, Dec 22, 2009 at 3:38 PM, Anil Sasidharan <[email protected]> wrote: >>>> Hi, >>>> >>>> Try running "logcat" command from the console and see the exact >>>> point of failure.. >>>> >>>> Warm Regards, >>>> Anil >>>> >>>> On Mon, Dec 21, 2009 at 4:44 PM, linux newbie <[email protected]> >>>> wrote: >>>>> >>>>> Hi, >>>>> >>>>> How to display the desktop sort of thing in my target? >>>>> I am getting the Android shell after booting but not desktop as we run >>>>> the emulator. >>>>> >>>>> Any suggestion? >>>>> >>>>> Thanks >>>>> >>>>> On Mon, Dec 21, 2009 at 2:05 PM, linux newbie <[email protected]> >>>>> wrote: >>>>> > Hi All, >>>>> > >>>>> > Thanks very much for your guidance. Android shell shows up :) >>>>> > >>>>> > Thanking You. >>>>> > >>>>> > On Sun, Dec 20, 2009 at 7:42 PM, Anil Sasidharan <[email protected]> >>>>> > wrote: >>>>> >> Hi, >>>>> >> >>>>> >> It seems "ASHMEM" is not enabled in kernel config (kernel log >>>>> >> does not >>>>> >> show the asmem init message). Please enable this module (Android Shared >>>>> >> Memory) and try. >>>>> >> >>>>> >> Warm Regards, >>>>> >> Anil >>>>> >> >>>>> >> On Fri, Dec 18, 2009 at 5:54 AM, linux newbie >>>>> >> <[email protected]> >>>>> >> wrote: >>>>> >>> >>>>> >>> Hi, >>>>> >>> >>>>> >>> STEP 1: >>>>> >>> I downloaded latest Andriod patched kernel (linux.2.6.27) using git >>>>> >>> clone. I applied our board specific patch on top of it and compiled it >>>>> >>> using toolchain arm-none-linux-gnueabi- >>>>> >>> >>>>> >>> I also compiled busybox with this same tool chain and booted the >>>>> >>> system and things were working fine as expected. >>>>> >>> >>>>> >>> STEP 2: >>>>> >>> Downloaded android source using git. compiled it for "generic" >>>>> >>> product. >>>>> >>> As my target has 128MB of SDRAM, I made a single root fs i.e copied >>>>> >>> out/target/product/generic/system to >>>>> >>> /out/target/product/generic/root_fs/system. >>>>> >>> >>>>> >>> commented mounting yaffs2 line for system and data in init.rc file. >>>>> >>> >>>>> >>> created ext2 file system image and downloaded it to my target. >>>>> >>> >>>>> >>> But I am not succesful in booting it. Please help me out to figure out >>>>> >>> the cause. Below is the log. >>>>> >>> >>>>> >>> Uncompressing >>>>> >>> >>>>> >>> Linux............................................................................................................... >>>>> >>> done, booting the kernel. >>>>> >>> Linux version 2.6.27-00127-gf92ea03-dirty (new...@ubuntu910vm) (gcc >>>>> >>> version 4.4.0 (GCC) ) #11 Thu Dec 17 15:44:03 PST 2009 >>>>> >>> CPU: XScale-PXA255 [69052d06] revision 6 (ARMv5TE), cr=0000397f >>>>> >>> Machine: RTS G5 >>>>> >>> Got g5 info >>>>> >>> 102292 C 1 3 >>>>> >>> 00:1A:EA:10:22:92 >>>>> >>> Memory policy: ECC disabled, Data cache writeback >>>>> >>> Memory clock: 99.53MHz (*27) >>>>> >>> Run Mode clock: 199.07MHz (*2) >>>>> >>> Turbo Mode clock: 199.07MHz (*1.0, inactive) >>>>> >>> Msc0: 97787ff8 (f6000008) >>>>> >>> Msc1: 23c7f8c (f600000c) >>>>> >>> Msc2: 7ff07ff0 (f6000010) >>>>> >>> mdcnfg: 1cb, mdrefr: 1802f >>>>> >>> cccr: 141 >>>>> >>> CPLD Version: a02 >>>>> >>> CPU0: D VIVT undefined 5 cache >>>>> >>> CPU0: I cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets >>>>> >>> CPU0: D cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets >>>>> >>> Built 1 zonelists in Zone order, mobility grouping on. Total pages: >>>>> >>> 32512 >>>>> >>> Kernel command line: root=/dev/ram0 rootfstype=ext2 >>>>> >>> console=ttyS1,115200 >>>>> >>> PID hash table entries: 512 (order: 9, 2048 bytes) >>>>> >>> Console: colour dummy device 80x30 >>>>> >>> Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) >>>>> >>> Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) >>>>> >>> Memory: 64MB 64MB = 128MB total >>>>> >>> Memory: 103564KB available (3184K code, 778K data, 112K init) >>>>> >>> SLUB: Genslabs=12, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, >>>>> >>> Nodes=1 >>>>> >>> Calibrating delay loop... 397.31 BogoMIPS (lpj=1986560) >>>>> >>> Mount-cache hash table entries: 512 >>>>> >>> CPU: Testing write buffer coherency: ok >>>>> >>> khelper used greatest stack depth: 6832 bytes left >>>>> >>> net_namespace: 320 bytes >>>>> >>> NET: Registered protocol family 16 >>>>> >>> khelper used greatest stack depth: 6536 bytes left >>>>> >>> RTS Init: Dec 17 2009 14:44:42 CPLD Version: 0a02 >>>>> >>> set_uart_alt_func:irq = 21 alt_func = 1 >>>>> >>> set_uart_alt_func:irq = 20 alt_func = 1 >>>>> >>> pwr_switch_hold_count = 30 >>>>> >>> khelper used greatest stack depth: 6440 bytes left >>>>> >>> SCSI subsystem initialized >>>>> >>> usbcore: registered new interface driver usbfs >>>>> >>> usbcore: registered new interface driver hub >>>>> >>> usbcore: registered new device driver usb >>>>> >>> NET: Registered protocol family 2 >>>>> >>> IP route cache hash table entries: 1024 (order: 0, 4096 bytes) >>>>> >>> TCP established hash table entries: 4096 (order: 3, 32768 bytes) >>>>> >>> TCP bind hash table entries: 4096 (order: 4, 81920 bytes) >>>>> >>> TCP: Hash tables configured (established 4096 bind 4096) >>>>> >>> TCP reno registered >>>>> >>> NET: Registered protocol family 1 >>>>> >>> checking if image is initramfs...it isn't (no cpio magic); looks like >>>>> >>> an >>>>> >>> initrd >>>>> >>> Freeing initrd memory: 22129K >>>>> >>> rts-kbd: Traker 5 keyboard >>>>> >>> input: rts-kbd as /class/input/input0 >>>>> >>> audit: initializing netlink socket (disabled) >>>>> >>> type=2000 audit(8.940:1): initialized >>>>> >>> JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc. >>>>> >>> msgmni has been set to 245 >>>>> >>> io scheduler noop registered >>>>> >>> io scheduler anticipatory registered >>>>> >>> io scheduler deadline registered >>>>> >>> io scheduler cfq registered (default) >>>>> >>> rts_backlight_power(): power: 1 >>>>> >>> Console: switching to colour frame buffer device 80x15 >>>>> >>> pxafb_smart_thread: not properly initialized, thread terminated >>>>> >>> ipmi message handler version 39.2 >>>>> >>> ipmi device interface >>>>> >>> IPMI Watchdog: driver initialized >>>>> >>> pxa2xx-uart.0: ttyS0 at MMIO 0x40100000 (irq = 22) is a FFUART >>>>> >>> pxa2xx-uart.1: ttyS1 at MMIO 0x40200000 (irq = 21) is a BTUART >>>>> >>> console [ttyS1] enabled >>>>> >>> pxa2xx-uart.2: ttyS2 at MMIO 0x40700000 (irq = 20) is a STUART >>>>> >>> pxa2xx-uart.3: ttyS3 at MMIO 0x41600000 (irq = 7) is a HWUART >>>>> >>> brd: module loaded >>>>> >>> loop: module loaded >>>>> >>> logger: created 64K log 'log_main' >>>>> >>> logger: created 256K log 'log_events' >>>>> >>> logger: created 64K log 'log_radio' >>>>> >>> SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit >>>>> >>> encapsulation enabled). >>>>> >>> CSLIP: code copyright 1989 Regents of the University of California. >>>>> >>> SLIP linefill/keepalive option. >>>>> >>> Driver 'sd' needs updating - please use bus_type methods >>>>> >>> physmap platform flash device: 00100000 at 00000000 >>>>> >>> Found: AMD AM29LV800BB >>>>> >>> physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank >>>>> >>> number of JEDEC chips: 1 >>>>> >>> cfi_cmdset_0002: Disabling erase-suspend-program due to code >>>>> >>> brokenness. >>>>> >>> RedBoot partition parsing not available >>>>> >>> RTS xD/NAND driver: 14:48:29 Dec 17 2009 >>>>> >>> Addr: 0x06000000 >>>>> >>> Adding NAND chip >>>>> >>> NAND device: Manufacturer ID: 0x98, Chip ID: 0x75 (Toshiba NAND 32MiB >>>>> >>> 3,3V 8-bit) >>>>> >>> Scanning device for bad blocks >>>>> >>> Using static partition definition >>>>> >>> Creating 3 MTD partitions on "NAND 32MiB 3,3V 8-bit": >>>>> >>> 0x00000000-0x00200000 : "kernel image" >>>>> >>> 0x00200000-0x02000000 : "root file system" >>>>> >>> 0x00000000-0x02000000 : "entire nand device" >>>>> >>> Adding xD card >>>>> >>> No NAND device found!!! >>>>> >>> 116x: driver isp116x-hcd, 03 Nov 2005 >>>>> >>> Initializing USB Mass Storage driver... >>>>> >>> usbcore: registered new interface driver usb-storage >>>>> >>> USB Mass Storage support registered. >>>>> >>> usbcore: registered new interface driver usbserial >>>>> >>> usbserial: USB Serial Driver core >>>>> >>> mice: PS/2 mouse device common for all mice >>>>> >>> i2c /dev entries driver >>>>> >>> Advanced Linux Sound Architecture Driver Version 1.0.17. >>>>> >>> ALSA device list: >>>>> >>> #0: pxa2xx-ac97 (Philips UCB1400) >>>>> >>> IPv4 over IPv4 tunneling driver >>>>> >>> GRE over IPv4 tunneling driver >>>>> >>> TCP cubic registered >>>>> >>> Initializing XFRM netlink socket >>>>> >>> NET: Registered protocol family 17 >>>>> >>> NET: Registered protocol family 15 >>>>> >>> XScale DSP coprocessor detected. >>>>> >>> RAMDISK: Compressed image found at block 0 >>>>> >>> VFS: Mounted root (ext2 filesystem). >>>>> >>> Freeing init memory: 112K >>>>> >>> init used greatest stack depth: 4224 bytes left >>>>> >>> Kernel panic - not syncing: Attempted to kill init! >>>>> >>> >>>>> >>> >>>>> >>> Thanks >>>>> >>> >>>>> >>> >>>>> >>> On Thu, Dec 17, 2009 at 5:12 AM, Yi Sun <[email protected]> wrote: >>>>> >>> > your init crashed. try to get some thing dump out from your init to >>>>> >>> > make >>>>> >>> > sure it works correctly >>>>> >>> > >>>>> >>> > On Wed, 2009-12-16 at 18:21 +1100, linux newbie wrote: >>>>> >>> >> Hi, >>>>> >>> >> >>>>> >>> >> I downloaded the latest kernel (Android supported) from git clone >>>>> >>> >> git://android.git.kernel.org. >>>>> >>> >> >>>>> >>> >> Modified it to include our device specific stuff and booted it with >>>>> >>> >> our prevoius root fs(no android) and bang got the crash. >>>>> >>> >> >>>>> >>> >> can anyone help me out to debug this issue. >>>>> >>> >> >>>>> >>> >> Uncompressing >>>>> >>> >> >>>>> >>> >> Linux................................................................................................................. >>>>> >>> >> done, booting the kernel. >>>>> >>> >> Linux version 2.6.27 (new...@newbierhel4vm) (gcc version 4.0.2) #2 >>>>> >>> >> Thu >>>>> >>> >> Dec 10 05:53:32 EST 2009 >>>>> >>> >> CPU: XScale-PXA255 [69052d06] revision 6 (ARMv5TE), cr=0000397f >>>>> >>> >> Machine: RTS G5 >>>>> >>> >> Got g5 info >>>>> >>> >> 102292 C 1 3 >>>>> >>> >> 00:1A:EA:10:22:92 >>>>> >>> >> Memory policy: ECC disabled, Data cache writeback >>>>> >>> >> Memory clock: 99.53MHz (*27) >>>>> >>> >> Run Mode clock: 199.07MHz (*2) >>>>> >>> >> Turbo Mode clock: 199.07MHz (*1.0, inactive) >>>>> >>> >> Msc0: 97787ff8 (f6000008) >>>>> >>> >> Msc1: 23c7f8c (f600000c) >>>>> >>> >> Msc2: 7ff07ff0 (f6000010) >>>>> >>> >> mdcnfg: 1cb, mdrefr: 1802f >>>>> >>> >> cccr: 141 >>>>> >>> >> CPLD Version: a02 >>>>> >>> >> CPU0: D VIVT undefined 5 cache >>>>> >>> >> CPU0: I cache: 32768 bytes, associativity 32, 32 byte lines, 32 >>>>> >>> >> sets >>>>> >>> >> CPU0: D cache: 32768 bytes, associativity 32, 32 byte lines, 32 >>>>> >>> >> sets >>>>> >>> >> Built 1 zonelists in Zone order, mobility grouping on. Total >>>>> >>> >> pages: >>>>> >>> >> 32512 >>>>> >>> >> Kernel command line: root=/dev/mtdblock2 rootfstype=jffs2 >>>>> >>> >> console=ttyS1,115200 >>>>> >>> >> PID hash table entries: 512 (order: 9, 2048 bytes) >>>>> >>> >> Console: colour dummy device 80x30 >>>>> >>> >> Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) >>>>> >>> >> Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) >>>>> >>> >> Memory: 64MB 64MB = 128MB total >>>>> >>> >> Memory: 125596KB available (3260K code, 780K data, 116K init) >>>>> >>> >> SLUB: Genslabs=12, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, >>>>> >>> >> Nodes=1 >>>>> >>> >> Calibrating delay loop... 397.31 BogoMIPS (lpj=1986560) >>>>> >>> >> Mount-cache hash table entries: 512 >>>>> >>> >> CPU: Testing write buffer coherency: ok >>>>> >>> >> net_namespace: 320 bytes >>>>> >>> >> NET: Registered protocol family 16 >>>>> >>> >> RTS Init: Dec 10 2009 05:06:54 CPLD Version: 0a02 >>>>> >>> >> set_uart_alt_func:irq = 21 alt_func = 1 >>>>> >>> >> set_uart_alt_func:irq = 20 alt_func = 1 >>>>> >>> >> pwr_switch_hold_count = 30 >>>>> >>> >> SCSI subsystem initialized >>>>> >>> >> usbcore: registered new interface driver usbfs >>>>> >>> >> usbcore: registered new interface driver hub >>>>> >>> >> usbcore: registered new device driver usb >>>>> >>> >> NET: Registered protocol family 2 >>>>> >>> >> IP route cache hash table entries: 1024 (order: 0, 4096 bytes) >>>>> >>> >> TCP established hash table entries: 4096 (order: 3, 32768 bytes) >>>>> >>> >> TCP bind hash table entries: 4096 (order: 4, 81920 bytes) >>>>> >>> >> TCP: Hash tables configured (established 4096 bind 4096) >>>>> >>> >> TCP reno registered >>>>> >>> >> NET: Registered protocol family 1 >>>>> >>> >> rts-kbd: Traker 5 keyboard >>>>> >>> >> input: rts-kbd as /class/input/input0 >>>>> >>> >> audit: initializing netlink socket (disabled) >>>>> >>> >> type=2000 audit(0.490:1): initialized >>>>> >>> >> JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc. >>>>> >>> >> msgmni has been set to 245 >>>>> >>> >> io scheduler noop registered >>>>> >>> >> io scheduler anticipatory registered >>>>> >>> >> io scheduler deadline registered >>>>> >>> >> io scheduler cfq registered (default) >>>>> >>> >> rts_backlight_power(): power: 1 >>>>> >>> >> Console: switching to colour frame buffer device 80x15 >>>>> >>> >> pxafb_smart_thread: not properly initialized, thread terminated >>>>> >>> >> ipmi message handler version 39.2 >>>>> >>> >> pxa2xx-uart.0: ttyS0 at MMIO 0x40100000 (irq = 22) is a FFUART >>>>> >>> >> pxa2xx-uart.1: ttyS1 at MMIO 0x40200000 (irq = 21) is a BTUART >>>>> >>> >> console [ttyS1] enabled >>>>> >>> >> pxa2xx-uart.2: ttyS2 at MMIO 0x40700000 (irq = 20) is a STUART >>>>> >>> >> pxa2xx-uart.3: ttyS3 at MMIO 0x41600000 (irq = 7) is a HWUART >>>>> >>> >> brd: module loaded >>>>> >>> >> loop: module loaded >>>>> >>> >> logger: created 64K log 'log_main' >>>>> >>> >> logger: created 256K log 'log_events' >>>>> >>> >> logger: created 64K log 'log_radio' >>>>> >>> >> SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 >>>>> >>> >> bit >>>>> >>> >> encapsulation enabled). >>>>> >>> >> CSLIP: code copyright 1989 Regents of the University of California. >>>>> >>> >> SLIP linefill/keepalive option. >>>>> >>> >> Driver 'sd' needs updating - please use bus_type methods >>>>> >>> >> physmap platform flash device: 00100000 at 00000000 >>>>> >>> >> Found: AMD AM29LV800BB >>>>> >>> >> physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank >>>>> >>> >> number of JEDEC chips: 1 >>>>> >>> >> cfi_cmdset_0002: Disabling erase-suspend-program due to code >>>>> >>> >> brokenness. >>>>> >>> >> RedBoot partition parsing not available >>>>> >>> >> RTS xD/NAND driver: 05:07:00 Dec 10 2009 >>>>> >>> >> Addr: 0x06000000 >>>>> >>> >> Adding NAND chip >>>>> >>> >> NAND device: Manufacturer ID: 0x98, Chip ID: 0x75 (Toshiba NAND >>>>> >>> >> 32MiB >>>>> >>> >> 3,3V 8-bit) >>>>> >>> >> Scanning device for bad blocks >>>>> >>> >> Using static partition definition >>>>> >>> >> Creating 3 MTD partitions on "NAND 32MiB 3,3V 8-bit": >>>>> >>> >> 0x00000000-0x00200000 : "kernel image" >>>>> >>> >> 0x00200000-0x02000000 : "root file system" >>>>> >>> >> 0x00000000-0x02000000 : "entire nand device" >>>>> >>> >> Adding xD card >>>>> >>> >> No NAND device found!!! >>>>> >>> >> 116x: driver isp116x-hcd, 03 Nov 2005 >>>>> >>> >> Initializing USB Mass Storage driver... >>>>> >>> >> usbcore: registered new interface driver usb-storage >>>>> >>> >> USB Mass Storage support registered. >>>>> >>> >> usbcore: registered new interface driver usbserial >>>>> >>> >> usbserial: USB Serial Driver core >>>>> >>> >> mice: PS/2 mouse device common for all mice >>>>> >>> >> i2c /dev entries driver >>>>> >>> >> Advanced Linux Sound Architecture Driver Version 1.0.17. >>>>> >>> >> ALSA device list: >>>>> >>> >> #0: pxa2xx-ac97 (Philips UCB1400) >>>>> >>> >> IPv4 over IPv4 tunneling driver >>>>> >>> >> GRE over IPv4 tunneling driver >>>>> >>> >> TCP cubic registered >>>>> >>> >> Initializing XFRM netlink socket >>>>> >>> >> NET: Registered protocol family 17 >>>>> >>> >> NET: Registered protocol family 15 >>>>> >>> >> XScale DSP coprocessor detected. >>>>> >>> >> Empty flash at 0x00506c78 ends at 0x00506e00 >>>>> >>> >> jffs2_scan_inode_node(): CRC failed on node at 0x00da89ec: Read >>>>> >>> >> 0xffffffff, calculated 0xa44aeeec >>>>> >>> >> Empty flash at 0x00da8a30 ends at 0x00da8c00 >>>>> >>> >> jffs2_scan_inode_node(): CRC failed on node at 0x0108ebd8: Read >>>>> >>> >> 0xffffffff, calculated 0x45ea5198 >>>>> >>> >> mtd->read(0x3c40 bytes from 0x10943c0) returned ECC error >>>>> >>> >> jffs2_scan_inode_node(): CRC failed on node at 0x010945c4: Read >>>>> >>> >> 0x0624050b, calculated 0xc6062405 >>>>> >>> >> jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at >>>>> >>> >> 0x01094638: >>>>> >>> >> 0x85ff instead >>>>> >>> >> jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at >>>>> >>> >> 0x0109463c: >>>>> >>> >> 0x74e0 instead >>>>> >>> >> jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at >>>>> >>> >> 0x01094640: >>>>> >>> >> 0xbc00 instead >>>>> >>> >> jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at >>>>> >>> >> 0x01094644: >>>>> >>> >> 0x5f68 instead >>>>> >>> >> jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at >>>>> >>> >> 0x01094648: >>>>> >>> >> 0x6000 instead >>>>> >>> >> jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at >>>>> >>> >> 0x0109464c: >>>>> >>> >> 0xa400 instead >>>>> >>> >> jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at >>>>> >>> >> 0x01094654: >>>>> >>> >> 0x8000 instead >>>>> >>> >> jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at >>>>> >>> >> 0x01094658: >>>>> >>> >> 0xac00 instead >>>>> >>> >> jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at >>>>> >>> >> 0x0109465c: >>>>> >>> >> 0xac00 instead >>>>> >>> >> jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at >>>>> >>> >> 0x01094660: >>>>> >>> >> 0xac00 instead >>>>> >>> >> Further such events for this erase block will not be printed >>>>> >>> >> jffs2_scan_inode_node(): CRC failed on node at 0x0109a5d0: Read >>>>> >>> >> 0xffffffff, calculated 0x662e61ab >>>>> >>> >> Empty flash at 0x010d8c10 ends at 0x010d8e00 >>>>> >>> >> Empty flash at 0x010e9614 ends at 0x010e9800 >>>>> >>> >> jffs2_scan_inode_node(): CRC failed on node at 0x010ee5ec: Read >>>>> >>> >> 0xffffffff, calculated 0xe54a14a9 >>>>> >>> >> jffs2_scan_dirent_node(): Node CRC failed on node at 0x012299f0: >>>>> >>> >> Read >>>>> >>> >> 0xffffffff, calculated 0x17e5bbcb >>>>> >>> >> Empty flash at 0x01229a20 ends at 0x01229c00 >>>>> >>> >> jffs2_scan_dirent_node(): Node CRC failed on node at 0x012f2bf4: >>>>> >>> >> Read >>>>> >>> >> 0xffffffff, calculated 0x2322e93d >>>>> >>> >> Empty flash at 0x012f2c24 ends at 0x012f2e00 >>>>> >>> >> VFS: Mounted root (jffs2 filesystem). >>>>> >>> >> Freeing init memory: 116K >>>>> >>> >> Kernel panic - not syncing: Attempted to kill init! >>>>> >>> >> >>>>> >>> >> On Wed, Dec 16, 2009 at 4:48 PM, Sayiram K N >>>>> >>> >> <[email protected]> wrote: >>>>> >>> >> > Hi >>>>> >>> >> > before loading the android can you try to load the linux kernel?? >>>>> >>> >> > if >>>>> >>> >> > it succeeds then you can switch to Android.may be change the root >>>>> >>> >> > args >>>>> >>> >> > as /sbin/init >>>>> >>> >> > >>>>> >>> >> > >>>>> >>> >> > On 12/16/09, jack <[email protected]> wrote: >>>>> >>> >> >> Hello, >>>>> >>> >> >> >>>>> >>> >> >> As Novin said, your kernel does not have the necessary stuff >>>>> >>> >> >> Android >>>>> >>> >> >> needs. >>>>> >>> >> >> You have to get your source code from >>>>> >>> >> >> http://android.git.kernel.org/ >>>>> >>> >> >> >>>>> >>> >> >> Regards, >>>>> >>> >> >> Jack >>>>> >>> >> >> >>>>> >>> >> >> On 12月16日, 上午10時08分, linux newbie <[email protected]> >>>>> >>> >> >> wrote: >>>>> >>> >> >>> Hi, >>>>> >>> >> >>> >>>>> >>> >> >>> I already enabled CONFIG_ARM_THUMB. >>>>> >>> >> >>> >>>>> >>> >> >>> Is it enough to make changes in make menuconfig of downloaded >>>>> >>> >> >>> kernel >>>>> >>> >> >>> for android? I am not finding ashmem under kernel/mm. >>>>> >>> >> >>> >>>>> >>> >> >>> Thanks >>>>> >>> >> >>> >>>>> >>> >> >>> >>>>> >>> >> >>> >>>>> >>> >> >>> On Wed, Dec 16, 2009 at 12:58 PM, jack >>>>> >>> >> >>> <[email protected]> >>>>> >>> >> >>> wrote: >>>>> >>> >> >>> > Hello, >>>>> >>> >> >>> >>>>> >>> >> >>> > Your log before the kernel panic is much the same as what I >>>>> >>> >> >>> > had >>>>> >>> >> >>> > before. >>>>> >>> >> >>> > I solve my problem by enabling the CONFIG_ARM_THUMB of >>>>> >>> >> >>> > processor >>>>> >>> >> >>> > feature to support Thumb user binaries. >>>>> >>> >> >>> > Good luck. >>>>> >>> >> >>> >>>>> >>> >> >>> > Regards, >>>>> >>> >> >>> > Jack >>>>> >>> >> >>> >>>>> >>> >> >>> > On 12月16日, 上午7時53分, linux newbie <[email protected]> >>>>> >>> >> >>> > wrote: >>>>> >>> >> >>> >> Hi, >>>>> >>> >> >>> >>>>> >>> >> >>> >> Here is the log before crash. >>>>> >>> >> >>> >>>>> >>> >> >>> >> Starting kernel ... >>>>> >>> >> >>> >>>>> >>> >> >>> >> Uncompressing >>>>> >>> >> >>> >> >>>>> >>> >> >>> >> >>>>> >>> >> >>> >> Linux...................................................................... >>>>> >>> >> >>> >> ..................................................... >>>>> >>> >> >>> >> done, booting the kernel. >>>>> >>> >> >>> >> Linux version 2.6.31.1 (new...@ubuntu910vm) (gcc version >>>>> >>> >> >>> >> 4.4.0 >>>>> >>> >> >>> >> (GCC) ) >>>>> >>> >> >>> >> #29 Tue Dec 15 14:54:04 PST 2009 >>>>> >>> >> >>> >> CPU: XScale-PXA255 [69052d06] revision 6 (ARMv5TE), >>>>> >>> >> >>> >> cr=0000397f >>>>> >>> >> >>> >> CPU: VIVT data cache, VIVT instruction cache >>>>> >>> >> >>> >> Machine: RTS G5 >>>>> >>> >> >>> >> Got g5 info >>>>> >>> >> >>> >> 102292 C 1 3 >>>>> >>> >> >>> >> 00:1A:EA:10:22:92 >>>>> >>> >> >>> >> Memory policy: ECC disabled, Data cache writeback >>>>> >>> >> >>> >> Memory clock: 99.53MHz (*27) >>>>> >>> >> >>> >> Run Mode clock: 199.07MHz (*2) >>>>> >>> >> >>> >> Turbo Mode clock: 199.07MHz (*1.0, inactive) >>>>> >>> >> >>> >> Msc0: 97787ff8 (f6000008) >>>>> >>> >> >>> >> Msc1: 23c7f8c (f600000c) >>>>> >>> >> >>> >> Msc2: 7ff07ff0 (f6000010) >>>>> >>> >> >>> >> mdcnfg: 1cb, mdrefr: 1802f >>>>> >>> >> >>> >> cccr: 141 >>>>> >>> >> >>> >> CPLD Version: a02 >>>>> >>> >> >>> >> Built 1 zonelists in Zone order, mobility grouping on. >>>>> >>> >> >>> >> Total >>>>> >>> >> >>> >> pages: >>>>> >>> >> >>> >> 32512 >>>>> >>> >> >>> >> Kernel command line: root=/dev/ram0 rootfstype=ext2 >>>>> >>> >> >>> >> console=ttyS1,115200 >>>>> >>> >> >>> >> PID hash table entries: 512 (order: 9, 2048 bytes) >>>>> >>> >> >>> >> Dentry cache hash table entries: 16384 (order: 4, 65536 >>>>> >>> >> >>> >> bytes) >>>>> >>> >> >>> >> Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) >>>>> >>> >> >>> >> Memory: 64MB 64MB = 128MB total >>>>> >>> >> >>> >> Memory: 103580KB available (3424K code, 397K data, 108K >>>>> >>> >> >>> >> init, 0K >>>>> >>> >> >>> >> highmem) >>>>> >>> >> >>> >> SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, >>>>> >>> >> >>> >> CPUs=1, >>>>> >>> >> >>> >> Nodes=1 >>>>> >>> >> >>> >> NR_IRQS:208 >>>>> >>> >> >>> >> Console: colour dummy device 80x30 >>>>> >>> >> >>> >> Calibrating delay loop... 397.31 BogoMIPS (lpj=1986560) >>>>> >>> >> >>> >> Mount-cache hash table entries: 512 >>>>> >>> >> >>> >> CPU: Testing write buffer coherency: ok >>>>> >>> >> >>> >> NET: Registered protocol family 16 >>>>> >>> >> >>> >> RTS Init: Dec 14 2009 21:48:29 CPLD Version: 0a02 >>>>> >>> >> >>> >> set_uart_alt_func:irq = 21 alt_func = 1 >>>>> >>> >> >>> >> set_uart_alt_func:irq = 20 alt_func = 1 >>>>> >>> >> >>> >> pwr_switch_hold_count = 30 >>>>> >>> >> >>> >> bio: create slab <bio-0> at 0 >>>>> >>> >> >>> >> SCSI subsystem initialized >>>>> >>> >> >>> >> usbcore: registered new interface driver usbfs >>>>> >>> >> >>> >> usbcore: registered new interface driver hub >>>>> >>> >> >>> >> usbcore: registered new device driver usb >>>>> >>> >> >>> >> cfg80211: Calling CRDA to update world regulatory domain >>>>> >>> >> >>> >> NET: Registered protocol family 2 >>>>> >>> >> >>> >> IP route cache hash table entries: 1024 (order: 0, 4096 >>>>> >>> >> >>> >> bytes) >>>>> >>> >> >>> >> TCP established hash table entries: 4096 (order: 3, 32768 >>>>> >>> >> >>> >> bytes) >>>>> >>> >> >>> >> TCP bind hash table entries: 4096 (order: 2, 16384 bytes) >>>>> >>> >> >>> >> TCP: Hash tables configured (established 4096 bind 4096) >>>>> >>> >> >>> >> TCP reno registered >>>>> >>> >> >>> >> NET: Registered protocol family 1 >>>>> >>> >> >>> >> Trying to unpack rootfs image as initramfs... >>>>> >>> >> >>> >> rootfs image is not initramfs (no cpio magic); looks like an >>>>> >>> >> >>> >> initrd >>>>> >>> >> >>> >> Freeing initrd memory: 22128K >>>>> >>> >> >>> >> rts-kbd: Traker 5 keyboard >>>>> >>> >> >>> >> input: rts-kbd as /class/input/input0 >>>>> >>> >> >>> >> NetWinder Floating Point Emulator V0.97 (double precision) >>>>> >>> >> >>> >> JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc. >>>>> >>> >> >>> >> msgmni has been set to 245 >>>>> >>> >> >>> >> alg: No test for stdrng (krng) >>>>> >>> >> >>> >> io scheduler noop registered >>>>> >>> >> >>> >> io scheduler anticipatory registered >>>>> >>> >> >>> >> io scheduler deadline registered >>>>> >>> >> >>> >> io scheduler cfq registered (default) >>>>> >>> >> >>> >> rts_backlight_power(): power: 1 >>>>> >>> >> >>> >> Console: switching to colour frame buffer device 80x15 >>>>> >>> >> >>> >> ipmi message handler version 39.2 >>>>> >>> >> >>> >> ipmi device interface >>>>> >>> >> >>> >> IPMI Watchdog: driver initialized >>>>> >>> >> >>> >> pxa2xx-uart.0: ttyS0 at MMIO 0x40100000 (irq = 22) is a >>>>> >>> >> >>> >> FFUART >>>>> >>> >> >>> >> pxa2xx-uart.1: ttyS1 at MMIO 0x40200000 (irq = 21) is a >>>>> >>> >> >>> >> BTUART >>>>> >>> >> >>> >> console [ttyS1] enabled >>>>> >>> >> >>> >> pxa2xx-uart.2: ttyS2 at MMIO 0x40700000 (irq = 20) is a >>>>> >>> >> >>> >> STUART >>>>> >>> >> >>> >> pxa2xx-uart.3: ttyS3 at MMIO 0x41600000 (irq = 7) is a >>>>> >>> >> >>> >> HWUART >>>>> >>> >> >>> >> brd: module loaded >>>>> >>> >> >>> >> loop: module loaded >>>>> >>> >> >>> >> nbd: registered device at major 43 >>>>> >>> >> >>> >> SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, >>>>> >>> >> >>> >> max=256) >>>>> >>> >> >>> >> (6 bit >>>>> >>> >> >>> >> encapsulation enabled). >>>>> >>> >> >>> >> CSLIP: code copyright 1989 Regents of the University of >>>>> >>> >> >>> >> California. >>>>> >>> >> >>> >> SLIP linefill/keepalive option. >>>>> >>> >> >>> >> smc91x.c: v1.1, sep 22 2004 by Nicolas Pitre <[email protected]> >>>>> >>> >> >>> >> eth0: SMC91C11xFD (rev 1) at c88ba300 IRQ 90 [nowait] >>>>> >>> >> >>> >> eth0: Ethernet addr: 00:1a:ea:10:22:92 >>>>> >>> >> >>> >> physmap platform flash device: 00100000 at 00000000 >>>>> >>> >> >>> >> Found: AMD AM29LV800BB >>>>> >>> >> >>> >> physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank >>>>> >>> >> >>> >> number of JEDEC chips: 1 >>>>> >>> >> >>> >> cfi_cmdset_0002: Disabling erase-suspend-program due to code >>>>> >>> >> >>> >> brokenness. >>>>> >>> >> >>> >> RedBoot partition parsing not available >>>>> >>> >> >>> >> RTS xD/NAND driver: 21:53:13 Dec 14 2009 >>>>> >>> >> >>> >> Addr: 0x06000000 >>>>> >>> >> >>> >> Adding NAND chip >>>>> >>> >> >>> >> NAND device: Manufacturer ID: 0x98, Chip ID: 0x75 (Toshiba >>>>> >>> >> >>> >> NAND >>>>> >>> >> >>> >> 32MiB >>>>> >>> >> >>> >> 3,3V 8-bit) >>>>> >>> >> >>> >> Scanning device for bad blocks >>>>> >>> >> >>> >> Bad eraseblock 0 at 0x000000000000 >>>>> >>> >> >>> >> Using static partition definition >>>>> >>> >> >>> >> Creating 3 MTD partitions on "NAND 32MiB 3,3V 8-bit": >>>>> >>> >> >>> >> 0x000000000000-0x000000200000 : "kernel image" >>>>> >>> >> >>> >> 0x000000200000-0x000002000000 : "root file system" >>>>> >>> >> >>> >> 0x000000000000-0x000002000000 : "entire nand device" >>>>> >>> >> >>> >> Adding xD card >>>>> >>> >> >>> >> No NAND device found!!! >>>>> >>> >> >>> >> reset disable >>>>> >>> >> >>> >> driver isp1362-hcd, 2005-04-04 >>>>> >>> >> >>> >> isp1362-hcd isp1362-hcd.0: ISP1362 Host Controller >>>>> >>> >> >>> >> isp1362-hcd isp1362-hcd.0: new USB bus registered, assigned >>>>> >>> >> >>> >> bus >>>>> >>> >> >>> >> number >>>>> >>> >> >>> >> 1 >>>>> >>> >> >>> >> isp1362_hc_reset: >>>>> >>> >> >>> >> isp1362-hcd isp1362-hcd.0: irq 87, io mem 0x08000000 >>>>> >>> >> >>> >> isp1362_hc_start: >>>>> >>> >> >>> >> isp1362-hcd isp1362-hcd.0: ISP1362 Memory usage: >>>>> >>> >> >>> >> isp1362-hcd isp1362-hcd.0: ISTL: 2 * 256: 512 @ >>>>> >>> >> >>> >> $0000:$0100 >>>>> >>> >> >>> >> isp1362-hcd isp1362-hcd.0: INTL: 16 * ( 64+8): 1152 @ >>>>> >>> >> >>> >> $0200 >>>>> >>> >> >>> >> isp1362-hcd isp1362-hcd.0: ATL : 32 * ( 64+8): 2304 @ >>>>> >>> >> >>> >> $0680 >>>>> >>> >> >>> >> isp1362-hcd isp1362-hcd.0: USED/FREE: 3968 128 >>>>> >>> >> >>> >> usb usb1: New USB device found, idVendor=1d6b, >>>>> >>> >> >>> >> idProduct=0001 >>>>> >>> >> >>> >> usb usb1: New USB device strings: Mfr=3, Product=2, >>>>> >>> >> >>> >> SerialNumber=1 >>>>> >>> >> >>> >> usb usb1: Product: ISP1362 Host Controller >>>>> >>> >> >>> >> usb usb1: Manufacturer: Linux 2.6.31.1 isp1362-hcd >>>>> >>> >> >>> >> usb usb1: SerialNumber: isp1362-hcd.0 >>>>> >>> >> >>> >> usb usb1: configuration #1 chosen from 1 choice >>>>> >>> >> >>> >> hub 1-0:1.0: USB hub found >>>>> >>> >> >>> >> hub 1-0:1.0: 2 ports detected >>>>> >>> >> >>> >> ISP1362 Host Controller, irq 87 >>>>> >>> >> >>> >> Initializing USB Mass Storage driver... >>>>> >>> >> >>> >> usbcore: registered new interface driver usb-storage >>>>> >>> >> >>> >> USB Mass Storage support registered. >>>>> >>> >> >>> >> usbcore: registered new interface driver usbserial >>>>> >>> >> >>> >> usbserial: USB Serial Driver core >>>>> >>> >> >>> >> mice: PS/2 mouse device common for all mice >>>>> >>> >> >>> >> i2c /dev entries driver >>>>> >>> >> >>> >> I2C: i2c-0: PXA I2C adapter >>>>> >>> >> >>> >> Advanced Linux Sound Architecture Driver Version 1.0.20. >>>>> >>> >> >>> >> ALSA device list: >>>>> >>> >> >>> >> #0: pxa2xx-ac97 (Philips UCB1400) >>>>> >>> >> >>> >> IPv4 over IPv4 tunneling driver >>>>> >>> >> >>> >> GRE over IPv4 tunneling driver >>>>> >>> >> >>> >> TCP cubic registered >>>>> >>> >> >>> >> Initializing XFRM netlink socket >>>>> >>> >> >>> >> NET: Registered protocol family 17 >>>>> >>> >> >>> >> NET: Registered protocol family 15 >>>>> >>> >> >>> >> lib80211: common routines for IEEE802.11 drivers >>>>> >>> >> >>> >> XScale DSP coprocessor detected. >>>>> >>> >> >>> >> RAMDISK: gzip image found at block 0 >>>>> >>> >> >>> >> VFS: Mounted root (ext2 filesystem) on device 1:0. >>>>> >>> >> >>> >> Freeing init memory: 108K >>>>> >>> >> >>> >> Kernel panic - not syncing: Attempted to kill init! >>>>> >>> >> >>> >> [<c00294e0>] (unwind_backtrace+0x0/0xd8) from [<c02a0524>] >>>>> >>> >> >>> >> (panic+0x40/0x108) >>>>> >>> >> >>> >> [<c02a0524>] (panic+0x40/0x108) from [<c0041318>] >>>>> >>> >> >>> >> (do_exit+0x68/0x5dc) >>>>> >>> >> >>> >> [<c0041318>] (do_exit+0x68/0x5dc) from [<c0041918>] >>>>> >>> >> >>> >> (do_group_exit+0x8c/0xc0) >>>>> >>> >> >>> >> [<c0041918>] (do_group_exit+0x8c/0xc0) from [<c004a48c>] >>>>> >>> >> >>> >> (get_signal_to_deliver+0x2d8/0x310) >>>>> >>> >> >>> >> [<c004a48c>] (get_signal_to_deliver+0x2d8/0x310) from >>>>> >>> >> >>> >> [<c0026490>] >>>>> >>> >> >>> >> (do_signal+0x54/0x4ec) >>>>> >>> >> >>> >> [<c0026490>] (do_signal+0x54/0x4ec) from [<c0023e0c>] >>>>> >>> >> >>> >> (work_pending+0x1c/0x20) >>>>> >>> >> >>> >>>>> >>> >> >>> >> On Wed, Dec 16, 2009 at 9:32 AM, linux newbie >>>>> >>> >> >>> >> <[email protected]> wrote: >>>>> >>> >> >>> >> > Hi, >>>>> >>> >> >>> >>>>> >>> >> >>> >> > I download the 2.6.31 kernel from kernel.org and updated >>>>> >>> >> >>> >> > it >>>>> >>> >> >>> >> > with our >>>>> >>> >> >>> >> > board specific patch. Then I enabled Android specific >>>>> >>> >> >>> >> > stuff >>>>> >>> >> >>> >> > using >>>>> >>> >> >>> >> > make >>>>> >>> >> >>> >> > menuconfig -> device drivers->staging drivers->Andriod. >>>>> >>> >> >>> >>>>> >>> >> >>> >> > I havent updated the kernel with yaffs2 patch, as I am >>>>> >>> >> >>> >> > downloading >>>>> >>> >> >>> >> > the >>>>> >>> >> >>> >> > andriod rootfs into SDRAM (ext2) and commenting out >>>>> >>> >> >>> >> > mounting >>>>> >>> >> >>> >> > yaffs2 >>>>> >>> >> >>> >> > in >>>>> >>> >> >>> >> > init.rc file. >>>>> >>> >> >>> >>>>> >>> >> >>> >> > Apart from above kernel modifications do I need to make >>>>> >>> >> >>> >> > any >>>>> >>> >> >>> >> > other >>>>> >>> >> >>> >> > changes in kernel? >>>>> >>> >> >>> >>>>> >>> >> >>> >> > Thanks >>>>> >>> >> >>> >>>>> >>> >> >>> >> > On Wed, Dec 16, 2009 at 7:05 AM, Novin S. >>>>> >>> >> >>> >> > <[email protected]> >>>>> >>> >> >>> >> > wrote: >>>>> >>> >> >>> >> >> The problem is that the kernel you are using on your >>>>> >>> >> >>> >> >> device >>>>> >>> >> >>> >> >> is not >>>>> >>> >> >>> >> >> suited for the version of the root fs or it is not >>>>> >>> >> >>> >> >> properly >>>>> >>> >> >>> >> >> patched >>>>> >>> >> >>> >> >> with android specific diffs.... >>>>> >>> >> >>> >>>>> >>> >> >>> >> >> On Dec 15, 3:24 pm, "Dennis.Yxun" <[email protected]> >>>>> >>> >> >>> >> >> wrote: >>>>> >>> >> >>> >> >>> do u use ramdisk or others? >>>>> >>> >> >>> >> >>> make sure kernel can find 'init' program >>>>> >>> >> >>> >>>>> >>> >> >>> >> >>> On Tue, Dec 15, 2009 at 4:34 PM, linux newbie >>>>> >>> >> >>> >> >>> <[email protected]>wrote: >>>>> >>> >> >>> >>>>> >>> >> >>> >> >>> > Hi, >>>>> >>> >> >>> >>>>> >>> >> >>> >> >>> > Thanks for your reply. >>>>> >>> >> >>> >>>>> >>> >> >>> >> >>> > As the messages are printing on the lcd, I couldn't >>>>> >>> >> >>> >> >>> > able >>>>> >>> >> >>> >> >>> > to get >>>>> >>> >> >>> >> >>> > the >>>>> >>> >> >>> >> >>> > logs. Anyway I shall try tomorrow. >>>>> >>> >> >>> >> >>> > After Freeing Init memory, I am getting this Kernel >>>>> >>> >> >>> >> >>> > Panic >>>>> >>> >> >>> >> >>> > (seems >>>>> >>> >> >>> >> >>> > console is opened properly) >>>>> >>> >> >>> >>>>> >>> >> >>> >> >>> > Please let me know, whether the procedure I am using >>>>> >>> >> >>> >> >>> > to >>>>> >>> >> >>> >> >>> > bring up >>>>> >>> >> >>> >> >>> > Android is correct or not? >>>>> >>> >> >>> >>>>> >>> >> >>> >> >>> > Thanks >>>>> >>> >> >>> >>>>> >>> >> >>> >> >>> > On Tue, Dec 15, 2009 at 6:29 PM, jack >>>>> >>> >> >>> >> >>> > <[email protected]> >>>>> >>> >> >>> >> >>> > wrote: >>>>> >>> >> >>> >> >>> > > Hello, >>>>> >>> >> >>> >>>>> >>> >> >>> >> >>> > > According to my porting experience, there will be >>>>> >>> >> >>> >> >>> > > many >>>>> >>> >> >>> >> >>> > > causes >>>>> >>> >> >>> >> >>> > > resulting in kernel panic. >>>>> >>> >> >>> >> >>> > > Pasting more logs before the line kernel panic will >>>>> >>> >> >>> >> >>> > > help >>>>> >>> >> >>> >> >>> > > for >>>>> >>> >> >>> >> >>> > > others to >>>>> >>> >> >>> >> >>> > > figure out your problem. Thanks. >>>>> >>> >> >>> >>>>> >>> >> >>> >> >>> > > Regards >>>>> >>> >> >>> >> >>> > > Jack >>>>> >>> >> >>> >>>>> >>> >> >>> >> >>> > > On 12月15日, >>>>> >>> >> >>> >>>>> >>> >> >>> ... >>>>> >>> >> >>> >>>>> >>> >> >>> 閱讀更多 »- 隱藏被引用文字 - >>>>> >>> >> >>> >>>>> >>> >> >>> - 顯示被引用文字 - >>>>> >>> >> >> >>>>> >>> >> >> -- >>>>> >>> >> >> unsubscribe: [email protected] >>>>> >>> >> >> website: http://groups.google.com/group/android-porting >>>>> >>> >> > >>>>> >>> >> > -- >>>>> >>> >> > unsubscribe: [email protected] >>>>> >>> >> > website: http://groups.google.com/group/android-porting >>>>> >>> >> >>>>> >>> >> -- >>>>> >>> >> unsubscribe: [email protected] >>>>> >>> >> website: http://groups.google.com/group/android-porting >>>>> >>> > >>>>> >>> > >>>>> >>> > -- >>>>> >>> > Android-x86 >>>>> >>> > www.android-x86.org >>>>> >>> > >>>>> >>> > -- >>>>> >>> > unsubscribe: [email protected] >>>>> >>> > website: http://groups.google.com/group/android-porting >>>>> >>> >>>>> >>> -- >>>>> >>> unsubscribe: [email protected] >>>>> >>> website: http://groups.google.com/group/android-porting >>>>> >> >>>>> >> -- >>>>> >> unsubscribe: [email protected] >>>>> >> website: http://groups.google.com/group/android-porting >>>>> > >>>>> >>>>> -- >>>>> unsubscribe: [email protected] >>>>> website: http://groups.google.com/group/android-porting >>>> >>>> -- >>>> unsubscribe: [email protected] >>>> website: http://groups.google.com/group/android-porting >>> >> > -- unsubscribe: [email protected] website: http://groups.google.com/group/android-porting
