Hi, Thats a good call to comment yaffs.. i guess you boot via MMC and not NAND. Default mode of android boot for RLS25 is from nand and hence yaffs is kept enabled for NAND boot.
btw - regarding no UI coming up, i booted the same tree y'day and was ok.. attached my boot log till UI. check against yours. Regards Deva On Wed, Feb 17, 2010 at 2:58 PM, eternity <[email protected]> wrote: > With help of a good guy, I found that init.rc in eclair AFS, was > trying to do these following lines: > > mount yaffs2 m...@system /system > mount yaffs2 m...@system /system ro remount > mount yaffs2 m...@userdata /data nosuid nodev > mount yaffs2 m...@cache /cache nosuid nodev > > So, I commented those lines and found that no more such errors are > coming. > > But still UI is not coming on zoom2 screen. It got stuck in "black > screen with small white android" but I am getting android shell in my > hyperterminal. > > I got the eclair branch using : > > repo init -u git://git.omapzoom.org/platform/omapmanifest.git -b > eclair > repo sync > > Is this branch is not stable?? > > regards, > > > On Feb 17, 1:08 pm, eternity <[email protected]> wrote: > > Hi, > > > > I am having two (downloaded) workspace for Omap Android which are > > RLS25.14 and eclair. Both are built with arm-2008q3 i.e gcc 4.3 > > toochain. > > > > Now when I am trying to boot AFS ( for both) on Zoom2 board: > > > > 1. for RLS25.14, the Zoom2 is booting fine > > but > > 2. for eclair I am getting the following error on hyperterminal: > > > > EXT3 FS on mmcblk0p2, internal journal > > EXT3-fs: recovery complete. > > EXT3-fs: mounted filesystem with ordered data mode. > > VFS: Mounted root (ext3 filesystem) on device 179:2. > > Freeing init memory: 184K > > Warning: unable to open an initial console. > > init: cannot open '/initlogo.rle' > > yaffs: dev is 32505860 name is "mtdblock4" > > yaffs: passed flags "" > > yaffs: Attempting MTD mount on 31.4, "mtdblock4" > > yaffs_read_super: isCheckpointed 0 > > yaffs: dev is 32505861 name is "mtdblock5" > > yaffs: passed flags "" > > yaffs: Attempting MTD mount on 31.5, "mtdblock5" > > yaffs_read_super: isCheckpointed 0 > > **>> Block 2 needs retiring > > **>> Block 2 retired > > **>> Block 3 needs retiring > > **>> Block 3 retired > > **>> Block 4 needs retiring > > **>> Block 4 retired > > : > > : > > : > > : > > **>> Block 247 needs retiring > > **>> Block 247 retired > > **>> Block 248 needs retiring > > **>> Block 248 retired > > **>> yaffs write required 247 attempts > > page 64 in gc has no object: 0 0 0 > > **>> Erasure failed 1 > > **>> Block 1 retired > > Block 1 is in state 9 after gc, should be erased > > yaffs tragedy: no more erased blocks > > yaffs tragedy: no more erased blocks > > yaffs tragedy: no more erased blocks > > !!!!!!!!! Allocator out !!!!!!!!!!!!!!!!! > > yaffs tragedy: no more erased blocks > > yaffs tragedy: no more erased blocks > > yaffs tragedy: no more erased blocks > > !!!!!!!!! Allocator out !!!!!!!!!!!!!!!!! > > yaffs tragedy: no more erased blocks > > yaffs tragedy: no more erased blocks > > yaffs tragedy: no more erased blocks > > !!!!!!!!! Allocator out !!!!!!!!!!!!!!!!! > > yaffs tragedy: no more erased blocks > > yaffs tragedy: no more erased blocks > > yaffs tragedy: no more erased blocks > > !!!!!!!!! Allocator out !!!!!!!!!!!!!!!!! > > yaffs tragedy: no more erased blocks > > yaffs tragedy: no more erased blocks > > yaffs tragedy: no more erased blocks > > !!!!!!!!! Allocator out !!!!!!!!!!!!!!!!! > > yaffs tragedy: no more erased blocks > > yaffs tragedy: no more erased blocks > > yaffs tragedy: no more erased blocks > > !!!!!!!!! Allocator out !!!!!!!!!!!!!!!!! > > yaffs tragedy: no more erased blocks > > yaffs tragedy: no more erased blocks > > yaffs tragedy: no more erased blocks > > !!!!!!!!! Allocator out !!!!!!!!!!!!!!!!! > > init: Unable to open persistent property directory /data/property > > errno: 2 > > init: cannot find '/system/bin/sh', disabling 'console' > > init: cannot find '/system/bin/cexec.out', disabling 'baseimage' > > init: cannot find '/system/bin/OMXPolicyManager', disabling 'omx_pm' > > init: cannot find '/system/bin/OMXResourceManager', disabling 'omx_rm' > > init: cannot find '/system/bin/gsm0710muxd', disabling 'mux' > > init: cannot find '/system/bin/servicemanager', disabling > > 'servicemanager' > > init: cannot find '/system/bin/vold', disabling 'vold' > > init: cannot find '/system/bin/debuggerd', disabling 'debuggerd' > > init: cannot find '/system/bin/sh', disabling 'pvrsrv' > > init: cannot find '/system/bin/rild', disabling 'ril-daemon' > > init: cannot find '/system/bin/app_process', disabling 'zygote' > > init: cannot find '/system/bin/mediaserver', disabling 'media' > > init: cannot find '/system/bin/fw3a', disabling 'fw3a' > > init: cannot find '/system/bin/playmp3', disabling 'bootsound' > > init: cannot find '/system/bin/dbus-daemon', disabling 'dbus' > > init: cannot find '/system/xbin/uim', disabling 'uim' > > init: cannot find '/system/bin/installd', disabling 'installd' > > init: cannot find '/system/bin/flash_image', disabling > > 'flash_recovery' > > omapdss DISPC error: SYNC_LOST, disabling LCD > > > > Any idea why this AFS is not working. But very surely those binaries > > are there in /system/bin and the same SD card I am using for both AFS > > (so, its not a SDCARD problem). > > Any help will be appreciated!!!!!!!!!!!11 > > > > Thanks in advance > > -- > unsubscribe: > [email protected]<android-porting%[email protected]> > website: http://groups.google.com/group/android-porting > -- unsubscribe: [email protected] website: http://groups.google.com/group/android-porting
U-Boot 1.1.4-ga40558d0-dirty (Dec 11 2009 - 04:46:59) OMAP3430-GP rev 4, CPU-OPP2 L3-165MHz OMAP3430Zoom2 Rev Production + mDDR (Boot NAND) DRAM: 256 MB NAND:512 MiB Reading data from 0x1df800 -- 100% complete. In: serial Out: serial Err: serial Battery levels: main 3874 mV, backup 3025 mV Hit any key to stop autoboot: 0 OMAP34XX ZOOM2 # boot 2410316 bytes read ## Booting image at 80300000 ... Image Name: Linux-2.6.29-omap1-00124-g97143b Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2410252 Bytes = 2.3 MB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK OK Starting kernel ... `ÓZ·ux version 2.6.29-omap1-00124-g97143bf-dirty (piy...@piyush-ubuntu) (gcc version 4.4.1 (Sourcery G++ Lite 2009q3-67) ) #2 PREEMPT Wed Feb 10 06:23:57 IST 2010 CPU: ARMv7 Processor [411fc083] revision 3 (ARMv7), cr=10c5387f CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache Machine: OMAP ZOOM2 board Memory policy: ECC disabled, Data cache writeback L2 CACHE is enabled in bootloader OMAP3430 ES3.1 SRAM: Mapped pa 0x40200000 to va 0xfc800000 size: 0x100000 Reserving 4194304 bytes SDRAM for VRAM Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024 Kernel command line: console=ttyS3,115200n8 root=/dev/mmcblk0p2 rw rootdelay=1 mem=256M init=/init stdin=serial stdout=serial stderr=serial omap_vout.vid1_static_vrfb_alloc=y omapfb.vram="0:4M" Clocking rate (Crystal/DPLL/ARM core): 26.0/332/500 MHz Reprogramming SDRC GPMC revision 5.0 IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts Total of 96 interrupts on 1 active controller OMAP34xx GPIO hardware version 2.5 PID hash table entries: 1024 (order: 10, 4096 bytes) OMAP clockevent source: GPTIMER1 at 32768 Hz Console: colour dummy device 80x30 Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 256MB = 256MB total Memory: 243840KB available (4488K code, 884K data, 176K init) Calibrating delay loop... 499.92 BogoMIPS (lpj=1949696) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok net_namespace: 520 bytes regulator: core version 0.5 NET: Registered protocol family 16 MUX: setup H18_34XX_GPIO163 (0xfa00219a): 0x0108 -> 0x011c MUX: setup B24_34XX_GPIO101_OUT (0xfa00211a): 0x0104 -> 0x0004 MUX: setup B25_34XX_GPIO109 (0xfa00212a): 0x0104 -> 0x0004 MUX: setup C25_34XX_GPIO96 (0xfa002110): 0x0000 -> 0x0004 MUX: setup H19_34XX_GPIO164_OUT (0xfa00219c): 0x0000 -> 0x0004 MUX: setup C27_34XX_CAM_PCLK (0xfa002112): 0x0100 -> 0x011c MUX: setup AF26_34XX_SYS_NIRQ (0xfa0021e0): 0x0118 -> 0x4118 OMAP DMA hardware revision 4.0 bio: create slab <bio-0> at 0 omap-uart.1: ttyS0 at MMIO 0x4806a000 (irq = 72) is a OMAP UART1 omap-uart.2: ttyS1 at MMIO 0x4806c000 (irq = 73) is a OMAP UART2 omap-uart.3: ttyS2 at MMIO 0x49020000 (irq = 74) is a OMAP UART3 omap-uart.4: ttyS3 at MMIO 0x10000000 (irq = 262) is a OMAP UART4 console [ttyS3] enabled i2c_omap i2c_omap.1: bus 1 rev3.12 at 100 kHz twl4030: PIH (irq 7) chaining IRQs 368..375 twl4030: power (irq 373) chaining IRQs 376..383 twl4030: gpio (irq 368) chaining IRQs 384..401 twl4030_mmc_init:367 twl4030_mmc_init:382 twl4030_mmc_init:382 MUX: setup M27_3430_MMC1_CMD (0xfa002146): 0x0118 -> 0x0000 MUX: setup AF10_3430_MMC3_CLK (0xfa0025d8): 0x001b -> 0x011a MUX: setup AC3_3430_MMC3_CMD (0xfa0021d0): 0x000b -> 0x011b MUX: setup AE11_3430_MMC3_DAT0 (0xfa0025e4): 0x0103 -> 0x011a MUX: setup AH9_3430_MMC3_DAT1 (0xfa0025e6): 0x0103 -> 0x011a MUX: setup AF13_3430_MMC3_DAT2 (0xfa0025e8): 0x0103 -> 0x011a MUX: setup AE13_3430_MMC3_DAT3 (0xfa0025e2): 0x0103 -> 0x011a regulator: VMMC1: 1850 <--> 3150 mV normal standby regulator: VDAC: 1800 mV normal standby regulator: VPLL2: 1800 mV normal standby regulator: VMMC2: 1850 mV normal standby regulator: VSIM: 1800 <--> 3000 mV normal standby i2c_omap i2c_omap.2: bus 2 rev3.12 at 100 kHz i2c_omap i2c_omap.3: bus 3 rev3.12 at 400 kHz SCSI subsystem initialized Bluetooth: Core ver 2.15 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized NET: Registered protocol family 2 IP route cache hash table entries: 2048 (order: 1, 8192 bytes) TCP established hash table entries: 8192 (order: 4, 65536 bytes) TCP bind hash table entries: 8192 (order: 3, 32768 bytes) TCP: Hash tables configured (established 8192 bind 8192) TCP reno registered NET: Registered protocol family 1 dspbridge_init: 600000 bytes @ 80c00000 zoom2_wifi_init: start omap-iommu omap-iommu.0: isp registered NetWinder Floating Point Emulator V0.97 (double precision) ashmem: initialized VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc. yaffs Feb 6 2010 03:58:23 Installing. msgmni has been set to 476 alg: No test for stdrng (krng) io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered OMAP DSS rev 2.0 OMAP DISPC rev 3.0 OMAP DSI rev 1.0 brd: module loaded loop: module loaded smsc911x: Driver version 2008-10-21. smsc911x-mdio: probed eth0: attached PHY driver [Generic PHY] (mii_bus:phy_addr=ffffffff:01, irq=-1) net eth0: MAC Address: 00:08:ee:02:d5:61 Linux video capture interface: v2.00 omap-previewer omap-previewer: omap-previewer: Registered preview wrapper omap3isp omap3isp: Revision 2.0 found omap-iommu omap-iommu.0: isp: version 1.1 i2c /dev entries driver Driver 'sd' needs updating - please use bus_type methods omap2-nand driver initializing NAND device: Manufacturer ID: 0x2c, Chip ID: 0xbc (Micron NAND 512MiB 1,8V 16-bit) Creating 7 MTD partitions on "omap2-nand.0": 0x000000000000-0x000000080000 : "X-Loader-NAND" 0x000000080000-0x000000200000 : "U-Boot-NAND" 0x0000001c0000-0x000000200000 : "Boot Env-NAND" 0x000000200000-0x000001e00000 : "Kernel-NAND" 0x000002000000-0x00000c000000 : "system" 0x00000c000000-0x00000e000000 : "userdata" 0x00000e000000-0x000010000000 : "cache" input: TWL4030 Keypad as /class/input/input0 synaptics_ts_probe: Product Major Version 1 synaptics_ts_probe: Product Minor Version 3 synaptics_ts_probe: product property 2 synaptics_ts_probe: device control 81 synaptics_ts_probe: interrupt enable 3 synaptics_ts_probe: 0xe0: 1 1 1 2 1 3 0 0 synaptics_ts_probe: Sensor properties 601 synaptics_ts_probe: max_x 7515, max_y 4667 synaptics_ts_probe: inactive_x 0 0, inactive_y 0 0 synaptics_ts_probe: snap_x 0-0 0-0, snap_y 0-0 0-0 input: synaptics-rmi-touchscreen as /class/input/input1 synaptics_ts_probe: Start touchscreen synaptics-rmi-touchscreen in interrupt mode twl4030_rtc twl4030_rtc: rtc core: registered twl4030_rtc as rtc0 Driver for 1-wire Dallas network protocol. omap_hdq omap_hdq.0: OMAP HDQ Hardware Rev 0.5. Driver in Interrupt mode w1_master_driver w1 bus master: Family 1 for 01.000000000000.3d is not registered. OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec Bluetooth: HCI UART driver ver 2.2 Bluetooth: HCI H4 protocol initialized Bluetooth: HCILL protocol initialized cpuidle: using governor ladder cpuidle: using governor menu logger: created 64K log 'log_main' logger: created 256K log 'log_events' logger: created 64K log 'log_radio' Advanced Linux Sound Architecture Driver Version 1.0.18a. No device for DAI twl4030 No device for DAI twl4030 Voice No device for DAI twl4030 Clock No device for DAI omap-mcbsp-dai-0 No device for DAI omap-mcbsp-dai-1 No device for DAI omap-mcbsp-dai-2 No device for DAI omap-mcbsp-dai-3 No device for DAI omap-mcbsp-dai-4 Zoom2 SoC init No device for DAI null MUX: setup MCBSP4_SLAVE (0xfa00218a): 0x0004 -> 0x0100 MUX: setup MCBSP4_SLAVE (0xfa0020b6): 0x0004 -> 0x0102 MUX: setup MCBSP4_SLAVE (0xfa0020b8): 0x0004 -> 0x0102 MUX: setup MCBSP4_SLAVE (0xfa0020ba): 0x0101 -> 0x0002 TWL4030 Audio Codec init asoc: twl4030 <-> omap-mcbsp-dai-0 mapping ok asoc: twl4030 Voice <-> omap-mcbsp-dai-1 mapping ok asoc: null <-> omap-mcbsp-dai-1 mapping ok asoc: null <-> omap-mcbsp-dai-2 mapping ok ALSA device list: #0: Zoom2 (twl4030) oprofile: using timer TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 17 NET: Registered protocol family 15 Bluetooth: L2CAP ver 2.13 Bluetooth: L2CAP socket layer initialized Bluetooth: SCO (Voice Link) ver 0.6 Bluetooth: SCO socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.11 Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Bluetooth: HIDP (Human Interface Emulation) ver 1.2 RPC: Registered udp transport module. RPC: Registered tcp transport module. Power Management for TI OMAP3. pm_dbg_init() SmartReflex driver initialized SmartReflex: enabling autocompensation Disabling unused clock "gpt2_ick" Disabling unused clock "gpio2_dbck" Disabling unused clock "gpio3_dbck" Disabling unused clock "gpio5_dbck" Disabling unused clock "gpt2_fck" Disabling unused clock "wdt2_ick" Disabling unused clock "wdt2_fck" Disabling unused clock "sad2d_ick" Disabling unused clock "dpll4_m6x2_ck" Disabling unused clock "dpll4_m5x2_ck" Disabling unused clock "dpll3_m3x2_ck" Disabling unused clock "sys_clkout1" VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1 sil9022 3-0039: <sil9022_set_cm_clkout_ctrl> sil9022 HDMI Chip version = b0 Console: switching to colour frame buffer device 100x30 mmc0: host does not support reading read-only switch. assuming write-enable. mmc0: new high speed SDHC card at address 0002 mmcblk0: mmc0:0002 00000 3.81 GiB mmcblk0: p1 p2 GPIO-199 autorequested omapdss DPI error: display already enabled omap_voutDisplay already enabled omapdss DPI error: display already enabled omap_voutDisplay already enabled omap_voutBuffer Size = 2048000 omap_vout: registered and initialized video device 0 [v4l2] omap_voutBuffer Size = 2048000 omap_vout: registered and initialized video device 1 [v4l2] omap_voutdisplay->updated imx046 2-001a: model id detected 0x46 mfr 0xb, rev# 0x2 imx046 2-001a: imx046 chip version 0x02 detected video4linux video5: video5 is now omap3/imx046// lv8093 Lens HW detected video4linux video5: video5 is now omap3/imx046/lv8093/ lv8093 2-0072: Registered lv8093 as V4L2 device. Registered lv8093 as i2c device. twl4030_rtc twl4030_rtc: setting system clock to 2000-01-29 19:56:36 UTC (949175796) Waiting 1sec before mounting root device... kjournald starting. Commit interval 5 seconds EXT3-fs warning: mounting fs with errors, running e2fsck is recommended EXT3 FS on mmcblk0p2, internal journal EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) on device 179:2. Freeing init memory: 176K Warning: unable to open an initial console. àinit: cannot open '/initlogo.rle' àsh: can't access tty; job control turned off # init: cannot find '/system/bin/playmp3', disabling 'bootsound' warning: `rild' uses 32-bit capabilities (legacy support in use) init: no such service 'bootanim' request_suspend_state: wakeup (3->0) at 15838317816 (2000-01-29 19:56:50.426788225 UTC) vdd_opp_store: Invalid value vdd_opp_store: Invalid value init: no such service 'bootanim' request_suspend_state: sleep (0->3) at 34045043886 (2000-01-29 19:57:08.633514295 UTC) stop_drawing_early_suspend: timeout waiting for userspace to stop drawing PM: Syncing filesystems ... done. Freezing user space processes ... (elapsed 0.00 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. Suspending console(s) (use no_console_suspend to debug)
