Hmm if i see the sensors.h file present in hardware/include
in that they have mentioned that value convertion is required for
Accelertaion/Orientation/Magnetic Field/Proximity/Light

2010/3/4 WoW <[email protected]>

> Should be the same but i did not check if Android will take care the
> input value for light sensor and proximity.
>
> The sample HAL implementation can be found here.
>
> http://android.git.kernel.org/
>
>
> On 3月4日, 下午4時47分, chetan kumar <[email protected]> wrote:
> > Thank you..
> > One more thing is same is applicable to compass/light sensor/proximity
> > sensor or any conversion is required ?
> >
> >
> >
> > On Thu, Mar 4, 2010 at 2:09 PM, WoW <[email protected]> wrote:
> > > From my experience, i only report raw data. SensorManager will use the
> > > data you report to calculate the angle and do the rotation. You need
> > > to implement HAL in \Hardware. So, JNI can get values from your driver
> > > and report to AP.
> >
> > > On 3月1日, 下午12時59分, "[email protected]" <[email protected]> wrote:
> > > > Hi,
> >
> > > > I am writing Sensor HAL for BMA150(3-axis accelerometer) on eclair.
> > > > when i refer to sensors.h below has been give.
> > > >   Acceleration
> > > >   -------------------
> > > >       All values are in SI units(m/s^2) and measure the acceleration
> > > > of the device minus the force of gravity.
> > > >       X:Acceleration minus GX on the X-axis
> > > >       Y:Acceleration minus GX on the Y-axis
> > > >       Z:Acceleration minus GX on the Z-axis
> >
> > > > I am getting raw values X,Y,Z values(from accelerometer Driver) Any
> > > > help on this how to convert raw values for above ??
> >
> > > > Rgds
> > > > Chetan
> >
> > > --
> > > unsubscribe: 
> > > [email protected]<android-porting%[email protected]>
> <android-porting%[email protected]>
> > > website:http://groups.google.com/group/android-porting- 隱藏被引用文字 -
> >
> > - 顯示被引用文字 -
>
> --
> unsubscribe: 
> [email protected]<android-porting%[email protected]>
> website: http://groups.google.com/group/android-porting
>

-- 
unsubscribe: [email protected]
website: http://groups.google.com/group/android-porting

Reply via email to