> > - looks like there's extra '172.17.44.60 ' in your bootargs..
i ll look again but same bootargs works if I use 2.6.26/29 kernel and ldp1.buildspec.mk but with 2.6.29 kernel and ldp1.buildspec.mk, i m not able to see anything on screen...so many errors i can see through logcat..... but yes still better than using zoom2 buildspec. and with 2.6.26 kernel and ldp1 buildpec.mk, most of things are fine... sound, video, usb .... etc.... - i assume you built with ./vendor/ti/zoom2/buildspec.mk.default as > ./buildspec.mk in this case, yes..... however, also explained other cases above... - have you copied './vendor/ti/zoom2/init.omapzoom2.rc' to ./init.rc? yup - if you did so, can you trim down init.rc to only mandatory services > (comment all the service launches)? alright.... I have not tried this.... ll do this first.... thanks, On Tue, Apr 13, 2010 at 2:27 PM, Viral Mehta <[email protected]> wrote: > > > > > > On 4/11/10, Deva R <[email protected]> wrote: > >> > >> There's no buildspec for 3430 SDP, but with minial or no effort we can > >> make zoom2 buildspec working.. > >> > >> >We tried with zoom2 buildspec but with that we are getting, > >> >Kernel panic - not syncing: Attempted to kill init! > >> > >> looks like android hasnt started booting only, should be some mismatch > >> in kernel bootargs. > >> Can you share bootargs, or bootlog right from uboot? > > > > > > > > setenv bootargs 'console=ttyS0,115200n8=noinitrd=rw ip=dhcp init=/init > > root=/dev/nfs nfsroot=172.17.44.60:/home/viral/root,nolock mem=128M > > 172.17.44.60 omapfb.vram=0:4M'' > > > > > > > > NET: Registered protocol family 15 > > > > RPC: Registered udp transport module. > > > > RPC: Registered tcp transport module. > > > > Power Management for TI OMAP3. > > > > pm_dbg_init() > > > > SmartReflex driver initialized > > > > Disabling unused clock "gpt2_ick" > > > > Disabling unused clock "gpt2_fck" > > > > Disabling unused clock "wdt2_ick" > > > > Disabling unused clock "wdt2_fck" > > > > Disabling unused clock "dpll4_m6x2_ck" > > > > Disabling unused clock "dpll4_m5x2_ck" > > > > Disabling unused clock "dpll3_m3x2_ck" > > > > Disabling unused clock "sys_clkout1" > > > > VP1:TRANXDONE timeout exceeded going ahead with the t2 smps wait > > > > VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1 > > > > Console: switching to colour frame buffer device 60x40 > > > > twl4030_rtc twl4030_rtc: setting system clock to 2000-01-01 00:00:00 UTC > > (946684800) > > > > mmc0: new SD card at address 7f69 > > > > mmcblk0: mmc0:7f69 SD512 488 MiB > > > > mmcblk0: p1 > > > > eth0: link up > > > > Sending DHCP requests ., OK > > > > IP-Config: Got DHCP answer from 0.0.0.0, my address is 172.17.44.52 > > > > IP-Config: Complete: > > > > device=eth0, addr=172.17.44.52, mask=255.255.255.0, gw=172.17.44.1, > > > > host=172.17.44.52, domain=, nis-domain=(none), > > > > bootserver=0.0.0.0, rootserver=172.17.44.60, rootpath= > > > > Looking up port of RPC 100003/2 on 172.17.44.60 > > > > Looking up port of RPC 100005/1 on 172.17.44.60 > > > > VFS: Mounted root (nfs filesystem) on device 0:12. > > > > Freeing init memory: 180K > > > > Warning: unable to open an initial console. > > > > Kernel panic - not syncing: Attempted to kill init! > > > > > > > > > > > > > > > > > > > > > -- Thanks, Viral Mehta -- unsubscribe: [email protected] website: http://groups.google.com/group/android-porting To unsubscribe, reply using "remove me" as the subject.
