Hi, > I'm using Android on an OMAP3530 board may i know what board you are working on? curious because android ports are readily available for most of omap3530 boards (but probably 2.6.29 kernel)
Thanks, Deva On Fri, Apr 16, 2010 at 1:56 AM, Deva R <[email protected]> wrote: > > add 'ignore_loglevel' to bootargs., so as to print all printk traces in > kernel., > there will be lot of traces, but you will get nice hints to debug.. > > alternatively, you can use below commands to control printk trace > levelRN_INFO > #echo 8 > /proc/sys/kernel/printk > (by default, only KERN_ERR traces are shown, but this will make KERN_INFO > to appear) > but i guess console is not ready in ur setup.. > > -Deva > > > On Thu, Apr 15, 2010 at 9:07 PM, G2 <[email protected]> wrote: > >> >> >> On Apr 15, 2:42 am, Deva R <[email protected]> wrote: >> > Hi, >> > what is the filesystem partition size being used? >> > >> > >[ 246.085876] EXT3-fs (mmcblk0p2): using internal journal >> > >[ 246.091949] EXT3-fs (mmcblk0p2): recovery complete >> > >[ 246.112457] EXT3-fs (mmcblk0p2): mounted filesystem with writeback >> > >data mode >> > >tar: write error: No space left on device >> > >> > - can you try increasing the filessystem partition size? >> > >> > - can you also explicitly set root, mem, init fields in your bootarg? >> > console=ttyS2,115200n8 root=/dev/mmcblk0p2 rw rootdelay=1 mem=256M >> > init=/init omapfb.vrfb=1 >> omapfb.mode=dvi:[email protected]_disp=dv3on Thu, Apr 15, 2010 >> at 7:08 AM, G2 >> Hello, >> >> Thanks for your answer. this "write error" is for a graphical >> initramfs and it has nothing to do with Android. I'm 100% sure. I have >> setup all arguments in kernel command line and still get the same >> error. Beyond Loglevel in /init.rc, is there anything else to increase >> log information so that I understand what's wrong in the kernel that >> creates this problem? >> >> Grégoire >> >> -- >> unsubscribe: >> [email protected]<android-porting%[email protected]> >> website: http://groups.google.com/group/android-porting >> >> To unsubscribe, reply using "remove me" as the subject. >> > > -- unsubscribe: [email protected] website: http://groups.google.com/group/android-porting
