Run "logcat" to see what's happening with Android which is causing this..without that information, it's hard to debug..
Regards -- Ashwin On Fri, May 7, 2010 at 6:20 AM, hadhami riahi <[email protected]> wrote: > Hello, > I'm porting Android on imx51 target.I was able to boot it from TFTP/ > NFS servers and from a SD card but I'm facing problems while trying to > boot from internal NAND. > I've created a jffs2 for the file system > My u-boot commands are: > bootcmd_nand=nand unlock;nand read 0x90800000 0x700000 0x232800;bootm > 0x90800000 > bootargs=console=ttymxc0,115200 androidboot.console=ttymxc0 wvga > calibration init=/init noinitrd root=/dev/mtdblock3 rw > rootfstype=jffs2 > > The end of the log is: > > JFFS2 doesn't use OOB. > Empty flash at 0x03bef5a8 ends at 0x03bef800 > VFS: Mounted root (jffs2 filesystem). > Freeing init memory: 132K > Warning: unable to open an initial console. > JFFS2 notice: (1035) check_node_data: wrong data CRC in data node at > 0x0f49bf6c: read 0xef2d0e46, calculated 0xd5e1ae35. > init: cannot open '/initlogo.rle' > init: cannot find '/system/etc/install-recovery.sh', disabling > 'flash_recovery' > # gpu_z430: module license 'Proprietary' taints kernel. > warning: `rild' uses 32-bit capabilities (legacy support in use) > request_suspend_state: wakeup (3->0) at 29417136653 (1970-01-01 > 00:00:29.417130028 UTC) > init: untracked pid 1773 exited > request_suspend_state: wakeup (0->0) at 41428491778 (1970-01-01 > 00:00:41.428484653 UTC) > init: untracked pid 1797 exited > > and it keeps printing the same message with increasing pid number! > What can be the problem? > Has anyone already faced the same issue? > Thanks! > > -- > unsubscribe: [email protected] > website: http://groups.google.com/group/android-porting > -- unsubscribe: [email protected] website: http://groups.google.com/group/android-porting
