Hi, We're seeing the below mentioned problem Device failing to resume properly after the suspend is done using power key from any application Problem: 1) Press Menu. 2) Select any application. 3) Now press power key. Device Suspends. 4) Once again press power key. Device Resumes. 5) Unlock Screen. 6) Now once again press Power Key. 7) Repeat steps 4-6 2 -3 times. 8) Device doesnt Resume. 9) It Restarts---> Problem
When analysed, it was observed that on Resume all the proccess is closed and the device framework is re-initialised. Below is the error log [ 1413.904428] request_suspend_state: sleep (0->3) at 1413910599759 (2009-08-13 03:31:18.695903379 UTC) [ 1413.908641] adxl345_early_suspend(): going to early suspend [ 1413.913499] adxl345_early_suspend(): Handled early suspend event. rc = 0 [ 1413.920246] msm_batt_early_suspend: enter [ 1413.925418] msm_batt_early_suspend: exit [ 1414.360904] save exit: isCheckpointed 1 [ 1524.768773] binder: release 1112:1150 transaction 9789 out, still active [ 1524.786919] request_suspend_state: wakeup (3->0) at 1524793093297 (2009-08-13 03:33:09.578395458 UTC) [ 1524.926257] init: untracked pid 1054 exited [ 1524.926563] init: untracked pid 1180 exited [ 1524.929088] init: untracked pid 1183 exited [ 1524.964896] init: untracked pid 1188 exited [ 1524.965206] init: untracked pid 1192 exited [ 1524.967783] init: untracked pid 1208 exited [ 1525.001255] init: untracked pid 1244 exited [ 1525.001536] init: untracked pid 1248 exited [ 1525.004198] init: untracked pid 1273 exited [ 1525.037298] init: untracked pid 1285 exited [ 1525.037607] init: untracked pid 1297 exited [ 1525.040206] init: untracked pid 1311 exited [ 1525.064185] msm_proc_comm(24,42,20898000) error 0x5 [ 1525.064575] msm_proc_comm(24,43,20898000) error 0x5 [ 1525.069018] init: untracked pid 1333 exited [ 1525.072618] init: untracked pid 1366 exited [ 1525.087503] init: untracked pid 1389 exited [ 1525.087798] init: untracked pid 1396 exited [ 1525.090369] init: untracked pid 1407 exited [ 1525.094519] init: untracked pid 1421 exited [ 1525.110589] init: untracked pid 1549 exited [ 1525.311090] msm_batt_late_resume: exter [ 1525.312610] msm_batt_late_resume: exit [ 1525.313136] adxl345_late_resume(): going to resume [ 1525.317875] adxl345_late_resume(): Handled Late resume event. rc = 0 [ 1525.334492] binder: 1061:1061 transaction failed 29189, size4-0 [ 1525.334822] binder: send failed reply for transaction 9789, target dead [ 1528.814232] msm_kgsl: initialized dev=1 mmu=on per_process_pagetable=off [ 1528.815401] misc kgsl: firmware: requesting yamato_pm4.fw [ 1528.823005] init: untracked pid 1825 exited [ 1528.825164] misc kgsl: firmware: requesting yamato_pfp.fw [ 1528.832717] init: untracked pid 1828 exited [ 1528.990248] pmem: successful request for physical address of pmem region id 1 , offset 553811968, len 24117248 [ 1529.830437] request_suspend_state: wakeup (0->0) at 1529836614965 (2009-08-13 03:33:14.621917335 UTC) [ 1529.856055] ***** ACCEL_DEBUG : adxl345_open ADXL345 OPEN [ 1533.418307] pcm_out: open Has anybody faced similar problem. Or can anybody give any solution regarding this. -- unsubscribe: [email protected] website: http://groups.google.com/group/android-porting
