Hi, This is my SD card default folder structure # ls bin dev lib opt sbin tmp boot etc lost+found proc sys usr data home mnt root system var #
I am copied all folder and file in System , data and root folder. But now my confusion is that 1) At the time on power on, Default my PCB kernel is boot. After the booting process complete i mount sd card using #mount /dev/hda1 /mnt/cf (This command is applying on My HyperTerminal) Then please tell me it is necessary to boot kernel first? If no then, how cf card will be mount? 2) I didn’t get your point "Also replace the kernel..." I am put my kernel in boot folder # ls /boot uImage-ms104sh4ag # Now when I am turn on my PCB, kernel will be boot. My confusion is that, it is ok that i used my PCB kernel? or any changes is required in boot loader or kernel? Thank you Pankaj Gdahiya On Jun 22, 12:23 am, abukustfan <[email protected]> wrote: > Hi, > > ic, then it should be fine for just replace the normal Linux userland > to Android userland. > <your_target_rootfs> = /media/<sdcard>/ > > Also replace the kernel... > > On Jun 22, 12:49 pm, Pankaj <[email protected]> wrote: > > > > > Hi > > it also support nfs boot. > > But now i used sd card for boot normal linux > > > On Jun 22, 8:35 am, Pankaj <[email protected]> wrote: > > > > Hi > > > I used SD card for boot normal linux. > > > > On Jun 22, 5:07 am, abukustfan <[email protected]> wrote: > > > > > Hi, > > > > > How do you boot normal Linux from your device? > > > > NFS or SD card? > > > > > On Jun 21, 11:38 pm, Pankaj <[email protected]> wrote: > > > > > > Hi abukustfan > > > > > Thanks for the reply. > > > > > I have compiled source code of android. > > > > > But my confution is how to run or porting android in my device. > > > > > I am used hyper terminal for intract with my PCB and U-Bot as a boot > > > > > loader. > > > > > > In your reply, i did not get <your_target_rootfs> i mean how can i > > > > > create my target rootfs system. > > > > > I have 4 gb sd card. But i don't know proting process/command. > > > > > > Would you please explain android porting step in real device? > > > > > > Thank you in advance > > > > > Pankaj Gadhiya > > > > > > On Jun 21, 2:22 pm, abukustfan <[email protected]> wrote: > > > > > > > You can create your rootfs as below, > > > > > > $ cp mydroid/out/target/product/ms7724/root/* <your_target_rootfs>/ > > > > > > $ cp mydroid/out/target/product/ms7724/system/* > > > > > > <your_target_rootfs>/ > > > > > > system/ > > > > > > $ cp mydroid/out/target/product/ms7724/data/* <your_target_rootfs>/ > > > > > > data/ > > > > > > > If you use MS7724, <your_target_rootfs> = USB partition 2. > > > > > > > Good luck! > > > > > > > On Jun 10, 7:07 pm, Pankaj <[email protected]> wrote: > > > > > > > > Thank you very much for your reply. > > > > > > > Yes you are right i missed step4. > > > > > > > Now i have build android source code forsuperHarch > > > > > > > > But now confusion is that how can i mount android image in my > > > > > > > Device. > > > > > > > Do you have any idea for same? > > > > > > > Please guide me. > > > > > > > > On May 25, 1:31 pm, abukustfan <[email protected]> wrote: > > > > > > > > > Hi, > > > > > > > > > I thinks you miss the step 4. > > > > > > > > $ cp patches/tools/local_manifest.xml .repo/ > > > > > > > > > On 5月19日, 午後2:50,Pankaj<[email protected]> wrote: > > > > > > > > > > Hello All > > > > > > > > > > I am new in porting android onSuperH > > > > > > > > > > As per flowing link i download source android source > > > > > > > > > code(Step 4) > > > > > > > > > successfully. > > > > > > > > > >https://oss.renesas.com/modules/document/?How%20To%20Build%20Android > > > > > > > > > > When i perform step 5 it give error. Like > > > > > > > > > "Directory vendor/renesas/ms7724/ not exist!" > > > > > > > > > > My confusion is, if i download all source code then why this > > > > > > > > > directory > > > > > > > > > not create in my mydroid folder? > > > > > > > > > > Also when i build source code (Step 6) Using > > > > > > > > > > make -j8 TARGET_ARCH=sh TARGET_PRODUCT=ms7724 > > > > > > > > > > it give following error > > > > > > > > > build/core/product_config.mk:173: *** No matches for product > > > > > > > > > "ms7724". > > > > > > > > > Stop. > > > > > > > > > > Please help me on this error. > > > > > > > > > Thank you in advance. > > > > > > > > > > -- > > > > > > > > > unsubscribe: [email protected] > > > > > > > > > website:http://groups.google.com/group/android-porting > > > > > > > > > -- > > > > > > > > unsubscribe: [email protected] > > > > > > > > website:http://groups.google.com/group/android-porting-Hidequotedtext- > > > > > > > - Show quoted text -- Hide quoted text - > > > > > - Show quoted text -- Hide quoted text - > > > > - Show quoted text -- Hide quoted text - > > - Show quoted text - -- unsubscribe: [email protected] website: http://groups.google.com/group/android-porting
