Hi, I tried that too, but still no success. Vold just stays in Pending status, and reports that the volume is busy if I try to mount via the command line (vdc).
Thanks, Anthony On Aug 13, 2:11 pm, 邱建波 <[email protected]> wrote: > try > "dev_mount sdcard /mnt/sdcard auto /block/mmcblk0" > in vold.fstab > > 2010/8/12 Anthony Russello <[email protected]> > > > > > Hi All, > > > I am currently working on bringing up Froyo on a device on which we > > are booting to the sdcard. U-Boot, kernel, and root filesystem are all > > there on separate partitions. > > > We have a partition, /dev/block/mmcblk0p1, which has a FAT32 > > filesystem to be used as /mnt/sdcard. In Eclair, this worked fine. But > > with the new vold, we find that it fails. > > > I'm using the Freescale i.MX51 platform, my vold.fstab looks like > > this: > > > dev_mount sdcard /mnt/sdcard auto /devices/platform/mxsdhci.0 > > > I've also tried: > > > dev_mount sdcard /mnt/sdcard auto /devices/platform/mxsdhci.0/ > > mmc_host/mmc0 > > > dev_mount sdcard /mnt/sdcard auto /devices/platform/mxsdhci.0/ > > mmc_host/mmc0/mmc0:b368 > > > Niether of those worked either. > > > Here's the output I get while booting: > > > I/Netd ( 2041): Netd 1.0 starting > > I/Vold ( 2040): Vold 2.1 (the revenge) firing up > > D/Vold ( 2040): Volume sdcard state changing -1 (Initializing) - > > > 0 (No-Media) > > D/DirectVolume( 2040): Dv::diskIns - waiting for 6 partitions (mask > > 0x7e) > > D/Vold ( 2040): Volume sdcard state changing 0 (No-Media) -> 2 > > (Pending) > > D/DirectVolume( 2040): Dv:partAdd: part_num = 1, minor = 1 > > D/DirectVolume( 2040): Dv:partAdd: pending mask now = 0x7c > > D/DirectVolume( 2040): Dv:partAdd: part_num = 2, minor = 2 > > D/DirectVolume( 2040): Dv:partAdd: pending mask now = 0x78 > > D/DirectVolume( 2040): Dv:partAdd: part_num = 3, minor = 3 > > D/DirectVolume( 2040): Dv:partAdd: pending mask now = 0x70 > > D/DirectVolume( 2040): Dv:partAdd: part_num = 4, minor = 4 > > D/DirectVolume( 2040): Dv:partAdd: pending mask now = 0x60 > > D/DirectVolume( 2040): Dv:partAdd: part_num = 5, minor = 5 > > D/DirectVolume( 2040): Dv:partAdd: pending mask now = 0x40 > > D/DirectVolume( 2040): Dv:partAdd: part_num = 6, minor = 6 > > D/DirectVolume( 2040): Dv:partAdd: pending mask now = 0x6 > > > And here is some output from the vdc command line interface: > > > # vdc volume list > > 110 sdcard /mnt/sdcard 2 > > 200 Volumes listed. > > # vdc volume mount /mnt/sdcard > > 405 volume operation failed (Device or resource busy) > > > I can manually mount the device using this command without any error: > > > mount -t vfat /dev/block/mmcblk0p1 /mnt/sdcard > > > Any help with this would be appreciated. > > > Thanks, > > Anthony > > > -- > > unsubscribe: > > [email protected]<android-porting%[email protected]> > > website:http://groups.google.com/group/android-porting > > -- > ------ > > Jianbo Qiu (邱建波) > > Mobile: 13681184653 > > MSN:[email protected] <msn%[email protected]> > > ------ -- unsubscribe: [email protected] website: http://groups.google.com/group/android-porting
